Electrical tips and tutorial based on my actual experiences in the field i just want to share my techniques and procedure of work that most common practitioner encounters in the actual fields of electrical and by sharing what i learned from my previous and expirience from different individuals getting and filtering all their knowledge and come out into most simple and relevant way to the jobs easier with out comprimising the quality and efficiency of the ouput in relevance with safety standards.To God all be the Glory
Primary to Secondary(grnd) and Secondary to Primary(grnd) tapos primary to ground. Secondary to Ground. Yang ganyan kaliit sir 100Megs minimum okay na.
@@electricalinsider2536 copy po. kala ko po kasi primary line to line and secondaty L-L need pa e IR. Bale Primary Lines to secondary lines IR tama poba?
IF $1 == 1 $1 = Var2 + Var3 ENDIF END ( find 1 error(s)! 0 warning(s): please refer to the output table for correnction ) i don't understand - video ( 9:17 to 10:00 ) time.
For anyone who happens to come across this video and wants a slightly better explanation about this 2.5 number. To work out the V quarter lengths that sit either side of the center V lines, we need to do the following formula (which works with any cable tray depth): Cable Tray Depth x tan(half the desired V angle) In this instance, we have 100mm cable tray depth and want each V to be 45 degrees, so half 45 degrees is 22.5 degrees. Therefore: 100mm x tan(22.5) = 41.42mm (4cm). The 2.5 number you see is found simply by dividing the 100mm by 41.42mm = 2.414 (2.5 for simplicity). So for future calcs with 45 degree bends, you divide tray depth by 2.5 and this will give you close enough the correct quarter lengths.
Hi po, plan ko po kasi mag intern jan sa guam culinary student. Ask ko lang po if sapat na po kaya ung allowance na 600-1000 usd per month libre na ang accomodation and meals?
No need na pag punta mo ng IIEE bayad kalang membership at COGS then ibigay agad certificate . Tapos pwde kana mag paappointment kung kelan ka mag renew, pag hindi first time mag renew need mo ng CPD points
The cables that subject for testing you mean? Yes that should be grounded for safety purposes. The shield wire should be connected to ground. Any leakage shall be discharge to ground even test if done (this applies to DC apparatus).
