Pineapple 22 Real Estate Photography and Videography. For business inquiries please use email address below.🍍 As an Amazon Associate, I earn from qualifying purchases.
That is accomplished with a video transition. That one is a lens zoom. This channel has my most recent videos I have made for real estate. ru-vid.com/show-UC8yuvrt8LcELCfpuQ_-g90Q
Thank you great info, I just went ahead and got a spare tire kit, to me it makes more sense. Shame that these manufacturers are cutting cost by removing the most important safety device in cars now a days and piling up more "safety" features that don't really make your car any safer!
A GPS from RDQ or Pyrodrone is like $15-$25 depending on size and functionality. No real need to buy a whole new quad. They even sell GEPRC GPS units if you want it to all be GEP. Just saying.
I did not know there was a new version of Beta Flight. I will upgrade soon the DoMains were shipped with 4.4 which I like because it has the HD option of the OSD. Thanks for the info 🍍
@@Pineapple22 Yeah, all that rth stuff supposed to be fixed. I'm still using vistas and original AU & use WTFOS for osd, works great. Haven't put gps on anything I have but shoot, those m10s are so darn cheap I don't know why I haven't?
A great video, I've been interested in the two quads for a long time. At the moment I'm well taken care of, but if I were then I would choose the larger of the two.Always have a good flight 🫡
Good video on the pump tear-down to get the canister out, but I have some concerns about the product you are showing and its use. So far the only Slime "2 in 1" sealant I see says to NOT use this on highway passenger vehicles. Are you sure you are using the correct stuff? This product appears to be for bicycle tires and farm equipment tires (e.g.: tractors). The one you show at 3:10 popping up appears to be for highway vehicles but that doesn't appear to be the same one you show in your hand in the video. Am I seeing this wrong? You don't want to be using the non-highway version in a motor vehicle. I also have concerns about using it as a flat preventer as you suggested. Yes you mentioned you did it on tires on implement items (wheelbarrow, etc.) but I don't think it's even a good idea to mention it here at all in the context of a motor vehicle as it could be misconstrued as OK to do so. The highway product version contains various warnings about it possibly causing vibration, and I would have concerns about its effectiveness if it's in the tires for thousands of miles and heating up and cooling down, etc. over and over when it's meant for a temporary tire fix only. Also, the tire rotation pattern is that the rears go to the front, but the front go to the rear and get swapped side to side. This means that if the tires also are directional, the front-to-swap-side-rear tires must be dismounted from the rims and swapped. This negates the use of the sealant in those tires in a preventive manner as they will be breached when doing a rotation properly, and will also be a mess for a tire shop to deal with. It will be a waste. Lastly, the product you linked to is no longer available. Amazon lists a replacement version which is in a pressurized can and you won't be able to even do this procedure. Yes the genuine Ford product is 3-4x the price (appears to be part number KR3Z-19554-B) but this is tires and safety...not a place to prioritize by price.
The Slime product in my hand in the video is NOT the correct product but the one in the product link and pop up is correct. I have updated the link, and it is now working. I am not promoting putting this sealant in your tires as a preventive like a run flat tire. I was saying I have used it in implement tires for that purpose. This inflation kit is to get you to your destination so you can have the tire repaired properly or replaced. I have used the Ford product on two occasions, and it did not work on either, but the Slime product did work and got me to my destination. It has nothing to do with price it has to do with quality of the sealant and how it fills the hole in the tire. Thank you for watching and your comments.
Ford recommends that the sealant be replaced every 4 years or if you have had to use it. Over time I would guess it will deteriorate and not be as effective.
Without the tape the drone can sometimes get a vibration that you can hear in the motors when it is flying. Putting that small piece of tape in there did the trick for me.
It does not have an overheating problem unless it is sitting without the props running. The Mini does not have an internal fan like the Mavic drone. I have never had any problems with it flying and use it multiple times a week.
Hello. I bought Mark 5 and I have this question: Have you had any problems with the connection between the DJI 2 remote control and the drone? was there rx loss?? Thank you!
I have not had any problems with the RC Connection. I have tested it flying it out until I lose vision and the RC Signal is still almost full strength. Make sure all of the firmware is up to date and you will be good there was a problem when the 03 Air Unit came out but that has been resolved.
My 2016 Ford fusion got a flat today ,I was surprised to find what I alway thought a silly little gadget actually worked!, it got me going again, and to the tire shop. Thanks for the refill info!
that was awsome, so i just ordered the GEPRC LR Tern40 and i cant wait to get started. you mention you are in GA, do you offer classes? I have only flown DJI and this will be my first FPV. there are so many videos out there that is a little overwhelming starting with betaflight lol. jeez
Glad you are getting started in the FPV hobby. I am in NE Georgia and if you are in that area I would be happy to help you out getting going. You can send me an email it is in the about section on the channel.
hey I just got the geprc mark 5 and the dji FPV controller 2 and I can't get it to fly the drone when ever I hit the top back right botton on the controller the drone starts beeping and the motors twitch a little tell I hit the botton again and that's it nothing else works could you give me any insite into this problem
It sounds like you did not configure the drone in BetaFlight. The GEPRC Drone needs to be configured using the BetaFlight Configurator to set up the channels and buttons. I do not have any videos on this but there are plenty of them on RU-vid. I need to make one showing how to do it on a BNF drone using the DJI RC. It is not that complicated your drone is good and I am sure it will be in the air soon.
The longest I have had the camera on with intermittent recording was about six hours and the 750 Battery was still good. I have tested the 8K and it works but I do not use it in my work flow but it is nice to be able to have it if needed.
RU-vid will not do a clickable link in a Short. You can just highlight the text and click on go to site or you can copy the link text and past it into a browser. I hope this works for you, if not let me know. Thanks for watching.
Thanks so much for this! Your ideas were so spot-on. I immediately went to order a plug kit to carry in the car, and exactly as you suggested, added my oldest pliers and a pair of old gloves to the kit. A reminder for people who use the plugs... The plugs (depending on brand) can harden up a little over time, and they may also be worth replacing every couple of years.
Even my Ford fusion from 2015 uses the same kit. It's been sitting empty in my trunk for like 2 years! 😂😂 Thanks for the video. Good tip on the repair kit. Not like it's gonna help me sitting in my tool box at home!
Love your videos, im gonna buy the GEPRC MARK5 HD O3 soon but I got a quick question. I also have the dji fpv controller 2 and the dji goggles v2. in the geprc app witch option do I use for the dji controller and goggles. like 6S PNP or 6S TBX NANO RX or 6X ERLS 2.4G. Im really confused about this part.
When ordering you just need to order the PNP and it will come ready to work with the DJI Remote Controller 2. I switch between the Goggle V2 and Goggles 2 depending on what I am flying but to tell you the truth I like the Goggles V2 a bit more. The only advantage that the Goggles 2 have is recording the OSD on the goggle video. If you order from GEPRC direct make sure you use the discount code pineapple22 to get a 5% discount which will most likely cover the shipping. One nice thing about ordering from GEPRC direct is no sales tax! If you have any other questions let me know. Thanks for watching 🍍
It is the remote that comes with the DJI FPV Drone. Remote Controller 2. It also works with the Avata and the 03 Air Unit that is on this GEPRC Mark 5. I have been really happy with it and have never lost RC Signal. I have tested it flying until the vision goes out and the RC signal is still almost full rip. This is a link to the Controller - amzn.to/3IFGzsd Thanks for watching 🍍
You can connect to an iPhone or iPad and use the DJI simulator. There are other simulators that work with PC’s but you can only connect your remote not the goggles.
That is correct had reused that clip from another video and noticed it after the video was posted. I did not want to take the video down, so I just left it as is. Hope the video helped you out and thanks for the comment. 🍍
You sound like me. I had 17 quads and finally got tired of the problems with the FrSky compatibility and the VTX never working properly or burning up so I sold all of them. I then purchased the DJI FPV Drone and started to enjoy just flying. When the 03 Air Unit came out, I was excited that the DJI RC2 would work with the setup. I purchased the iFlight Nazgul and had nothing but problems with the RC. I think it is because they use their own antennas not DJI and the BEC was not large enough. I liked the design of the GEPRC and gave it a try and now it is just like flying the DJI FPV but with a better camera and much more performance. I tested the RC link and flown it until I lost video, and the RC link is still fine. I just recently purchased the ne DoMain 3.6 GPS and a 4.2 GPS from GEPRC and have a couple of flights on them and they are a lot of fun. It is nice to have DJI Reliability and the fun of a Carbon Fiber Frame for durability. Thanks for Watching 🍍
Hi, I'm looking into buying one just like yours, Mark 5. How much time does each battery give you with GoPro mounted? Can it be used with dji integra glasses?
I fly most of the time with a 1300 mAh battery and get around 5 to 7 min of flight time. If you are really giving it a rip the time will be more like 3.5 min of flight time. The DJI 03 Air Unit works great with the Goggles Integra. The DC (Dead Cat) frame is nice if you do not want to use a GoPro the props are not in the view. I have a DC model as well and fly it almost as much as the true X frame. Thanks for watching 🍍
Yes these drone have problem with over heat when updating or setting the functions. When they heat up gimbal overload happens and when u fly in full hot sun same problem gimbal overload
