All very curious and pleasure for this lady, but not complete due to certain unforeseen events that many do not know. There are now many cars with switches (see the 4-pin, ones two of which are dedicated to the cruiser) whose signal is interfaced with the on-board computer, which even when replacing the switch, the brake lights remain on by turning the ignition key. Everything must be reset by a mechanic cars, who inserts his computer into the O.B.D. diagnostic socket, to solve the problem or see via the computer codes if there are other problems that cause the lights to remain continuous without pressing the brake pedal.
This helped me out today! I had to use one of those long knife sharpeners but once I got the blades to rotate everything was good to go! You’re awesome!
Same thing exactly happened to me. Little blades moved freely but still just a hum. I used a 7/8” dowel to get the base to rotate and it powered up and worked fine! Thanks so much! I thought I’d have to buy a new one.
Worked perfectly. The only thing I did differently was use a long screw driver and inserted in one of the long slots. It took 30 seconds to free the plate.
GOD BLESS YOU!!!! FOR REAL! I didn't need(or have) WD40 but what I know I have is a small rake handle. I instantly became the superhero in the family by "fixing" the issue.
The hardest part is removing the old cover. Initially I tried using a flat head screwdriver after watching another video. I gave up after a while without success (I didn't want to scratch my fridge with the screwdriver). Thanks to this video, I switched to a flat edge putty knife which worked very well in prying off the old cover. I then cleaned the edge of the opening and the nozzle with a paper towel before putting on the new cover. It was very easy. You just pop it in by pressing on all the sides of the cover.
looking back at this video and noticing the prices :,( I just paid $30 for each Bosch windshield wiper in 2023! Take us back to these times. I haven’t even attempted to change them but the employee at autozone tried and couldn’t lol.
Completely solved my problem. THANK YOU! went from passenger side with a screwdriver right between the 2 foot air vents. Wiggled the temp knob and popped right in. I have AC now.