Thanks! I have to replace the lens assembly and this is exactly what I needed to know. 👍

My mother in law backed into something and I attempted to replace both the tail light housing and the one in the hatch. Let's just say only the tail lights got replaced lol. I was able to reassemble the back hatch interior trim despite several broken clips, etc.

How about some torque specs !

Thanks for sharing

I have a 2018 tlx 2.4. Can you tell me if I will need to reset and codes after replacing the battery? Thanks

Thanks for your videos on removing and installing a door panel. Just wanted to add your videos are still helping people like me years later

Thank you🙏

how to remove the rail trim (just above the door) on a 2001 Outback?

Thank You Sir !!! Yeah if it’s old that plastic will crack on that bracket . The replacement was cheap $13.00 and have one just in case I need it .

Thank you for this video! Thanks to your video, I was able to quickly remove and replace the broken tailgate finish panel on our 2011 Outback.

For sure one of the best videos on UTB! I got this now!❤ You are Awsome! Just subscribed! ❤ 14:57

How tf do you do the one on the Sedan? Every time I try they break.

This was so helpful. It reminded me of the last time I asked Joe Biden for guidance about something.

When I put it back together my interior door handle won't work. Oh jeez

Thanks 😊

Right on boss man 🤙🏼

this was great! Thank you

It's actually cool that you showed how you did the wrong sequence...it's nice to see the professional mechanics make mistakes too

I couldn't get mine back on and it turns out it was the order I was doing the various pieces - thanks for the tips!!

Thanks! I just had a sensor die and now I know that the battery isn't serviceable.

Thanks this was even useful to help me with the 2003 model, although some minor details are different.

Thanks Bro

Thanks 👍

I need to express my thanks for this video. I did the same installation on my car last week. The only difference is that I did not have access to a lift so I removed the front bumper cover and did the assembly on the ground. It added more time but it was really only 14 pop connectors. That 10mm bolt will be tricky if you’re working from below. I would advise that you use only genuine Subaru right and left brackets. The aftermarket ones are junk. I ordered the lens assemblies form Amazon but used the real Subaru brackets and hardware. This video covered it all and gave me exactly the details I needed. I suggest a flashlight to help find the clips if taking them off.

what part number is that?

Just ordered new drivers side sun visor for my 2011 Tribeca…$359 😳😳😳

Would the Legacy wagon tailgate fit the Outback?

Thank you for your videos! I’ve learn so much!

You didn’t show the inside 10mm bolts?

Would this generally be the same way to perform this on a 2017 forester ? My air flow knob is stuck and can’t turn left past the foot air flow option !

THEY TOOK BROS SEAT 😨😨😨

thank you.

Very useful video. Im doing some anti rattle job in my obk and all your video where interior panels are to be removed are superuseful❤😊

Hoe did you detach the clips in the middle console where the gear box is?

Common mistake at 3:10 would be final torquing that bolt until the car is resting on its tires (or you've jacked the hub to the equivalent of ride height). Otherwise, the bushing becomes twisted upon lowering the vehicle, which shortens its life.

Thanks much bro

Where did you get your radiator from

Come over here really quick. I will show you nothing again

Lol typically you would start from the beginning, not when you’re 99% done

I saw the removal and thought to myself "omg, that would be hard to put back on!" And than I saw this video. My man, You're my savior! Thank you very much!

So retightening roof rails are going to be quite a bit of work 🤔

I can't tell if this is a joke. My pucker factor was high listening to that cvt squeal😬

The seat track covers on mine were a 🤬to remove. Definitely disconnect battery and pull the airbag fuse. Let it sit for a while just in case, the last thing you want to do is have to replace airbags also.

In the driver's side seat removal video he says you can wash or pressure wash the seat. That's a bad idea. Due to the airbag(s), and sensors (detect a passenger sitting and enable the airbag), and the heating "element" for heated seats - which looks pretty fragile - soaking the seats is a bad idea. A really bad idea. Seat have had to be removed and repaired, at great expense, because an adult or child in very wet swimwear got it wet.

weird how you search for a video on how to do this and the right way with to do this with all the answers shows up after a week..hmm.i cant thank you enough even if it was 4 years ago.your still helping the subie family..I hit the thumbs up.

I can't see anything,only your body

Thank you, very helpful. I have a 2017 Forester standard model. I need to replace back mirror cover (passenger). Will I need glue? or screws or does it just snap into place?

SHOW US TUE INSIDE OF THE DOOR YOU STUPID BUMBLING FUCK

Helped me knock it out thanks man!

Thanks for posting this. I'll be replacing my neighbor's headlight assemblies for her tomorrow. Having watched this video, things should go much more smoothly. 👍