First time trying I exploding when putting hot mix into a plas-tank, will try again and hopefully not boom next time. It was strong enough to kill me through the RD suit though, so nice.
@@baronbacku9984 I've found out, you have to upgrade the canister's tier. which is a mundane shit update but a reasonable one to avoid low IQ bitches creating maxcap and bombing the whole station.
@@baronbacku9984 Build the canister frame, if you finish without adding plasteel, it will be tier 1, with plastel, it will tier 2 (which it's the canister that you will need to use for the super heated plasma), plus if you add a bluespace crystal, it will turn out tier 3, which is quite useless and I don't see a point to use it...
Since a 50k is a maxcap, how can you do it most efficiently (using the least amount of gas for a maxcap)? One maxcap is awesome, but _two_…sometimes you can't depend on Cargo to give you more precious gas.
3 o2 into chamber t2 cooler on output cool the trit till it stops accumilating then pump it new pump switch to plasma get it cool an o2 can get 850kpa trit then the rwst cooled o2 and then other tank of plasma an boom 50k bomb no need for uber hawt can.
@@yonasvb6620 okay so you have 3 canisters of Oxygen that you pump into the chamber after that is done and you have build a series of pipes just straight pipes no pumps with a manifold to connect a freezer that has tier 2 lasers and tier 2 matter bins inside of it then you have a filter set to plasma and two connectors one for hot plasma and one for cooled tritium. now once that is done you set your input pipes at 50kpa and the scrubber on expanded and scrubbing tritium then you attach a can of plasma and set the chamber on fire. there now you are making tritium and it is accumilating in the pipe where the freezer is without being pumped anywhere at this time (the filter must be off). now you take a 4th can of o2 and pump it into a blue air pump which you then proceed to cool with another t2 freezer. now your tritium should be getting along nicely and you should check on it with an atmospheric analyzer if its not at 43 kelvin yet let it be, but once it is you turn the scrubber off and the filter on and wait untill the air pump is full of tritium and after that you disconnect it and turn off the freezer and switch the scrubber to scrubbing plasma filling the last air pump with it. now you have 3 air pumps with cooled tritium, cooled oxygen and hot plasma. what you do now is you take two plasma tanks or an o2 tanks and empty them with a scrubber then you pump one with 850kpa of tritium and the rest with o2 and the other tank with your hot plasma. there now just attach them to a ttv with a signaler or timer or whatever you like to use and your maxcap/research bomb is ready.
Awesome video, I think it would be awesome if you did a tutorial video like this and then did some live rounds and record them putting the method in practice. I love watching SS13 videos, but sometimes am left behind what I'm watching. this solves that problem! Hope to see some more SS13 from you soon