@@guaro3d741 Thanks a lot!

hi, yes it is necessary to buy additional components such as electronics and 2mm screws, if you click on the link in the video description there are links to the various products you need to complete the car, hope you enjoy

@@Faber222 thank you very much bro 🙏🙏😊

hello, as answered in the other comment, the list of components needed to finish the car is in the description on Cults3D, to get there just click on the link in the video description

@@Faber222 Thank you 🙏

Thank you!

I'm sorry that you are experiencing this problem , I'm not clear exactly what piece you are experiencing problems with, if you are referring to the hub where you screw in the screw that holds the wheel I suggest you use a 20mm screw, it is designed so that the screw holds the stress while the plastic only serves to allow the rotation of the wheel, I hope I've helped you, otherwise send me a private message I'll try to better understand the problem

Thanks you, interesting idea, definitely requires more complex design because of the interlocks, keep it up

Yes, it could be faster but I chose a short gear for acceleration, it reaches top speed almost instantly

You can find it in my channel or at this link: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Ad6Aff79PHs.html&feature=shares

Thank you !

Thanks, glad you like it, Fusion!

@@Faber222 Cool thanks. I use fusion too but sometimes the free version is frustrating

Thanks I'm glad you like it, I haven't tested it off road but I would say using the more raised setup and if the ground is flat enough it might be able to run, I only tested it indoors and on asphalt with some sand, anyway for 1/24 cars natural terrains and grass are very difficult to deal with due to small size and ground clearance. With a mini crawler, like the one I created in a previous video, you have more fun on these terrains.

@@Faber222 excellent, I will print one and will call it my drifter buggy, will be awesome with some decails on body, by the way what exactly color and brand filament did you use for the body, I like that color

@@TheFpc20 the entire car is printed in PLA plus by SUNLU, you can find that color at this link: amzn.eu/d/9HAWUHS For the pinion use a drop of glue on the shaft otherwise when the motor warms up it risks slipping since the pla has little resistance to heat, it still works but this way you can easily run the entire battery life without problems. Have fun !!

@@Faber222 excellent, thank you so much!

Hi, thanks I'm glad you like it

😂😂

Thank you, I'm glad you like it. You can dowload it at this link: cults3d.com/en/3d-model/various/rc-mini-crawler-1-24

@@Faber222 thank you so much!🤩

Thank you , i shooted that in 1080p 60 frame

Yes , take off from the boat and land on hand, the speed was about 23/24 knot, almost the max speed of the mini

no it doesn't ,i do it manually