What strikes me is that your approach always starts with measuring capacitance values. Probably rightly so, but recognizing other SMD components is also one of your better skills . And care, for example when using double-sided tape and using reflow method with a heat gun. In this case no capacitor issue. Needless to say, Eizo has always been a very good and expensive monitor, as can be seen from the construction
Excellent. Magimix with the "we wont tell" attitude is now on my "do not recomment" list. I volunteer at repair cafes and often get blenders. The conversation often goes into "what brand do you recommend". Well, i never recommend. But I'm always happy to give really bad brand examples and why I personally would never buy them 😂
It's probably too late, as you will have reassembled it buy now, but you can purchase a cleaning block to clean the armature, or you can use a fin grit paper, but it looks like oil on your brushes from a leaking bearing, hope your fix works for you. Bob in the UK
Nice job you did.. I had doubts about the coupler, but you succeeded. Still the question remains: where did the smoke come from..? Dirty collector? It looks fine....
Thank you! Good question, but I don't know to be honest. Maybe the collector indeed, or the brushes, these could have created some friction and decide to evaporate part of themselves.
Thanks for your efforts, I now have an idea of what to look for. Also, 2 cool things that I will be doing in the future, drawing a simple outline of unit and taping screws: same screw- same hole=good. Also the lint roller from Ikea. Nice.
Thank you so much for your kind words. It really prevents a lot of headaches those drawings with screws taped to it ;). If you could subscribe to my channel, I'd appreciate it!
i have bought Sony CDP-K1 CD Player with pitch adjust it comes on displays -8 on the display and does not seem to do anything else the cd tray opens closes any ideas
Hi Paul, that's a nice CD player! Does it sound like it is reading the CD? - does it start to spin when you close the lid after a cd is inserted. If it doesn't react at all to any of the other buttons I'd check the connections between the board containing the button switches and the main board like I did in the video first. I had another CD player where the connections between the two boards on the front of the machine were loose because of mechanical stress by the buttons. Loose connections or dried solder joints are very often the cause of problems and they are easy to detect with a multimeter.
Thank you so much! I bought mine at Aliexpress, make sure you choose the one that will fit and has a decent amount of mAh's. You could search for "3.7 V lithium battery".