Top-Cast Surface Retarder is a water-based product that slows the set of the top surface of freshly-poured concrete, allowing for various depths to be “etched” into the concrete for decorative purposes. Epoxy coatings are applied on top of existing concrete to achieve desired performance and appearance characteristics. I hope this answers your question. If you have additional questions, feel free to contact Dayton Superior directly for technical assistance: www.daytonsuperior.com/forms/technical-assistance
This is really helpful. Are there any good charts for deciding spacing? I really didn't find much. I found the wood association document which I really struggled to understand and then it kind of looks like everybody else just deffers to that.
We are glad you enjoyed the video! We have some helpful charts and tips in the first section of our Concrete Forming Accessories handbook. It is available on our website to download: www.daytonsuperior.com/docs/default-source/handbooks/concreteformingaccessorieshb.pdf?sfvrsn=24f1d560_120
Thanks for your interest! You are welcome to reach out to our National Training Manager to see if he offers a metric version of this training. Email chuckhoke@daytonsuperior.com
Great Video. So much useful information!!! Rookie question but when would it be acceptable to use a waler only form system with short end ties over a waler with strongback/stud + long end tie system?
We are happy to answer any question, no worries on that! You can use a short end snap-tie with the Jahn System up to 8’0” in height: your pour rate of concrete is limited and you will still need to have a strongback every 8’0” oc. The Jahn System is load rated at 2250lb SWL so you are limited to a pour rate with this system to maximize the loading per tie. Hope that helps and thanks so much for the video feedback.
if I want to pour a concrete foundation and I don't have the money to pour it all in height! can I use climbing formwork? and to pour it in stages? making sure that I have connection lines and distribution bars? is it possible to build a house with a 1.2 m deep foundation? the first stage 60 cm foundation sole and then the 2nd stage another 60 cm and then the elevation part 3 pouring concrete 40 cm high?the width of the foundation wall and elevation is 32 cm.what you think about my ideea! i use less wood for woodframework!
While sandblasting can be used to expose aggregate, it’s generally used as a mechanical means for cleaning a surface from unwanted contamination such as old toppings, dirt, and even graffiti. Sandblasting to achieve an aesthetic look can be quite the task to ensure an even look across the entirety of the surface. It requires heavy equipment and limits the options for the final overall look and feel of the exposed aggregate. With our Top-Cast system of products, a variety of etch depths can be achieved with a simple spray application that not only ensures uniformity but allows for creativity in producing aesthetically pleasing designs utilizing exposed aggregate. Feel free to contact our technical services team at 877-266-7732 with any further questions.
Thanks for the question. Depending on weather conditions, the first coat of bond breaker typically takes approximately 2 hours to dry. Once dry, a second coat is applied and again (depending on conditions) this coat also takes approximately 2 hours to dry. At this point, a water bead test can be performed and if the water beads like a freshly waxed automobile, it is ready for the pour.
Hey I have a channel about concrete I would like to use this stuff, would u be interested in working together on a video in the future? U supply the top cast, and that is basically sponsoring my video! I plug your info in the video and talk about it!
The SS 100 site saver helps with overspray removal, while the EX 200 extender allows extra working time on the project for easier removal. We have video demonstrations of both products on here if you are interested. Thanks!
Bring these to Australia please.. i want the fine sand finish versions.. no one has that here Closeset is SIKA Rugasol 90 diluted.. but does not seem as predictable.
Hi Aaron - we are happy to tell you that we are planning to roll out Top-Cast in Australia later this year! We appreciate your support and stay tuned for our launch.
Please use a 6 sack mix as stated on the technical data sheet. You may call our technical support at 877-266-7732 or you can find a copy of the TDS here: www.daytonsuperior.com/products/chemicals?name=top-cast-