Hi do you have a save scan of your car my car is the same as yours if you have would you post a scan code of the car I’m having some problems with mine thanks 🙏
Works,first time not because i did not exactly so in video but second time i did exactly like in video,press accelerator till the glow lamp comes,wait till she goes out and than all off and auto one more time on and it was that
Hi, I have replaced the mechatronic unit on my car and performed basic settings however there are sometimes issues with engaging gears 2-3. Do i need to run one of the other options e.g IDE 12710-Initialization of clutch friction coefficient model after mechatronics exchange?
0:52 Removing the oil cooler inlet pipe from gearbox 1:44 Adding adapters to the oil cooler inlet pipe and output from the gearbox 1:50 Connecting the quick connector to the input and output. 2:13 Adding Transmission Cleaner 2:45 Flushing procedure, foot on brake then D, N, R for 5 mins each 3:06 Pumping out the old oil 3:16 Removing the old pan 3:20 Flushing the cooler & valve body 1L 4:16 The new pan 4:52 Filling new pan with oil 5:26 Full Replacement Procedure 5:53 Checking the level and oil temperature 6:44 Removing the Adaptors 7:20 Reconnecting the oil cooler inlet pipe to the gearbox
Great video. So if I'm seeing this correctly you are going through the trans cooler. It looks like you have disconnected the outlet pipe from the tran cooler which is connected to the square adaptor and then this goes to the waste container on the machine? I assume you pump oil directly into the transmission using the right angled adaptor? The oil circulates around the gearbox and then through the trans cooler inlet pipe and back through the outlet pipe into waste essentially flushing the transmission and cooler all in one. If this is incorrect please let me know. Couple of quick questions assuming above is correct: 1. My understanding was that the thermostat on the trans cooler only opens at 75C degrees. If so wow is oil flushing through the inlet and outlet on the trans cooler? 2. What size is the fitting for the adaptor that connects to the gearbox? 3. Where can I buy these fittings?
This is WRONG! 1. This is service mode for when you lift the car at a shop or if you need to jack up the car to swap a spare tire. 2. You don't need to do this to tow. 3. If you do this and start driving, it will come out of this service mode by itself and you basically wasted time doing this. 4. Why post videos with wrong information?
every video on youtube is of the Amazon X431.. they're gray.... they are also sold by chines sellers and are not compatible with the US market.. That looks like a UK Launch? hope it works out
I had this light com on in my 2015 MB c300 and it ended up being the original battery started to not hold charge anymore with the car off the battery tested 11.7V replaced battery and light went away instantly also noticed that the auto start and stop feature stopped working 2 weeks prior to light coming on.