Kymco

Any update on the cab enclosure and heater?

Very interested in this boat Stephen, sent email and hope to hear back from you soon you.

Hey guys. Can someone give me some advice. I have a 4.5m aluminum boat. With a 50hp Evinrude on the rear (2 stroke). It's currently got a 15 pitch stainless steel 3 blade. My issue is. The steering is very difficult to turn left and right in the water at anytime even when the Boat is trimmed correctly. The mechanics have inspected everything else and said it's all brand new. (2017 model boat) Example if I turn the boat left it will take quite some time for me to get the boat turned to the other direction using alot of force. I understand it's a cable steering boat but it's abnormal. I've also changed from a 13 inch steering wheel to a 15inch and that has helped. Will dropping the pitch to a 13 4 blade help this issue? Please give me opinions everyone

What about going down in diameter size from 11.5 3 blade to a 10.5” 4 blade? 16’ Carolina skiff jvx 50hp

She is a beautiful boat

Am changing props. Sought advice and was recommended from going from a 10 3/8 × 14p to a 12 1/4 x 9P. Could you elaborate on the correlation between diameter and pitch? Appreciate a short concise video such as this. Just call me suffering prop confusion in Montana. Great vid

How is the 2015 platform i just traded my bike for one

Why aren’t there more videos explaining the importance of the diameter of the prop more so than the pitch of the prop?

suzuki 115 wot is 5400 with a 14x19 aluminum prop want to go stainlees and get the rpms up , what do you suggest

Sanger needs to get their boats into this century. Looks like a 2006 malibu that was cheaply reupholstered

The yellow dry storage thingy you said put your stuff in to keep it dry is for the fire extinguisher

Where can I find a quick connect for my hose for my boat?

What is the hourse power, please?

Clark Angela Davis Frank Lopez Lisa

Who makes katana ?

Very good overall condition 😅

Last forever

Put a steel prop on a 3litre OMC stern drive. Prop seemed to generate a flywheel effect and smooth out unwanted vibrations. Also seemed to have better traction in the water. I was impressed.

Is this still available?

Great video! Final bit of info for the viewers…make sure to re-grease the spline shaft before placing the prop back onto the shaft.

I have a 14p aluminum prop getting 5000 rpm at wot. My engine is rated at 5500rpm.. I want to get a stainless steel prop at get to 5500rpm at wot. What would you recommend?

I swapped a solas Amita 10.3 / 12p wot 4500 21 mph for a solas Amita 10.8 x 10p 5350 rpm 23 mph. Trim level on both. Evinrude 25hp 1989 trapper topper 15 stick steer.

I got a 70hp mercury on a 17 ft flatbottom what prop should I run 3 men an gear

Thanks this helps alot, Install Instruction papers should be this precise!

Please redo the video!! Put a wind filter on the mic Thanks!!

Do these RH boats have a live well?

Hello, where are you located?

Nice video, I'm looking into buying a used one of these near me and this has been very informational for me. Thanks!

Price??

Does the floor storage have a plug in there so no water gets in? Our items in ours seems to get wet so wasn’t sure if there is supposed to be a plug

I have a 2008 Tahoe q4 and was wondering if the floor storage is supposed to have a plug? The items in ours gets wet

Best crossover you can buy, regardless of price. If only you could get a Raptor 460*

I have a ranger vx1788 150 pro xs. It currently has a 19p 4 prop revolution steel. Is this good enough I’ve hit 40mph haven’t really maxed out but I’m assuming kits close to max mph. I want more speed usually 4-6 of us with normal fishing gear. All led acid battery atm.

You clowns sale people you talk so much you show so much but you can never say the price😅😅😅😅😅

It's 90% the same as my parents 1994 Troller XL. Had a lot of fun on that boat as a kid.

I have a StarCraft 3.0 Mercruiser , with a W14.5 x 19P , i need a new prop because my old one is damaged, what’s my best size to go with you think ?

I have an older alumarine in south carolina... only one around.. i love it.. just redid the floor and seats and we use it weekly. put on my bimini top and i keep up with the big boats on my local lake..

Looking for the best prop for my 1710 StarCraft , 3.0 mercruser what’s everyone running , I’m looking for good top end and good torque & fuel ? Can anybody help me???

1990 regal Valanti 17 foot with the 3.0 what prop are you going to run?

Swapped a solas 19 pitch for a turning point 17 pitch on suzuki 90 gainded 800rpm and 3mph

I wish you had a shop in Northern California.

No price in the listing?

Chico, no can hear nada

I have a 2023 115 vmax Yamaha with 22 pacific skiff wondering its work on 13 1/2 19 blade

Well what's the price?

They need to put the Indmar 460 in this boat.

Just curious if it has sold yet and what was the sale price ? I just picked up a 91 arriva 20ft wanna know what I could possible sell for

Cool 😎 ❤

What should the WOT be fot a1994 Evenrude 90hp? Its on a Stratos 265. Thanks.