Hi Rudy I need help with my treadmill. My belt next to my motor seems to be loose and I’m having trouble fixing it. Could you advise how to fix this problem?
Hi Rudolf - am I the only one experiencing an E3 error? My superfit has flung me off in mid stride, and now I'm fearful to even walk on it. I can't jog on it or go past 5 mph, or it will send the error code, stop short, and I will be flung to my death. Can you give me guidance or video on how to fix this?
I am not sure what you ment by that but I am 49 years old and there are only two genders. I am.also raised in the south so term guys has and is still used to cover both men and women. I am definitely not a pc kind of guy. My videos are out there to help you do stuff and things and make it easier to tackle some of life's problems.
Can someone help me my machine starts and the speaker and all works but the belt stopped working it makes like a noise as if it would like to start but the belt doesn’t move 😢
It looks like your alignment is off. This can be fixed using my video. I will.admit thst the alignment process is painful. You have to take the time to tune it right. I have two of these and use the steps provided. Never had any issues.
Kept my prized Mountain Dew collection under my bed. Went to put risers under there to lift it and found most of the boxes damp and molded. I saved a lot of them so far but lost my treasures 2019 Halloween Dew. They’re still leaking in the cooler I have them in.
hi I got a goplus 2 in 1 same type of treadmill and the remote stop syncing slowly but surely. At the beginning it would pick it up from time to time but now there’s absolutely nothing. I try so many times to pair them with no success. I tried to check from time to time but the machine won’t pick up the remote for months now. Do you please have any ideas of what’s wrong.
I have the same treadmill model that has been “pulsing” from day one. Any chance @Rudyworld, you or someone watching can help diagnose my issue? ru-vid.comeoDN4Vv1a1Y?si=b-C-pjSWb01AGNVD
I'm having trouble with the remote. Fresh batteries, followed pairing instructions with old and new remote and can't get it going. Any ideas what I need to do?
Thanks for the vid. One of the "blade" bolts is loose on mine. Wish you would have taken a look under the blades. Is it a standard bolt to tighten the blade? About to find out. But at least I now know how to get to them.
I wanted to let you know I figured out how to remove the drivebelt/small motor belt. I contacted the manufacturer to help me with it and they sent me this video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-VyBlnZZhHmM.htmlsi=ToDwVx_tiyYp14nZ
I've misplaced my owners manual, and none of the replacement manuals I've found online with costway show how to replace the drivebelt on this treadmill. My belt has unaligned with the wheels (whatever you call those two wheels the drivebelt are on). I've removed that bolt at the top and the roller seems to pull put very little from the other side the belt is on. But I have no way to pull the belt completely off.
How do you fix an E05 error? It turns on and works when you walk on it, but once you speed up and start a jog, it comes to a halt and shows an E05 on the screen .
the superfit instructions say to "clean the belt and pulley grooves regularly "and "adjust the motor belt", it did stop some of the slip but, made a lot of motor noise and didn't effect the squealing. Did I miss something, the motor cover on my treadmill doesn't pop up like yours does 8:09 mins... I'm suspecting, full of dust or the wheels on the rollers need lubricant? My two year old superfit, worked great at first, is now making an awful squealing noise and, the belt slips... I'm in "walking belt adjustment hell" trying to get that right again after reading that noise and slippage might have been a belt that is too tight or too loose senior lady here, trying to get up the nerve to watch your video again and take it apart, if that is what I have to do... eeek no one does treadmill service in my area. the on/off switch quit last year but, fortunately, I can control that with a power strip. A good thing because costway tells me, they don't sell parts and at 1.5 years, it is out of warranty. My next treadmill, will be a better brand like ProFit, who at least talked to me about a problem with that treadmill, when it was 10 years old. Costways, service... heh...
You set it up in the game.. you download the drivers and games like MSFS2020 will have a pre-built tab. There you can adjust the settings. Happy gaming.
Great video, thanks. Do you know what causes the switch to be messed up when you're tightening the belt? I don't want to mess it up again. I just received my part replacement today and replaced the switch.
Thanks for watching, I have a video coming out in the new month that talks about all of that. The switch does have a fuse inside and so does the treadmill. The stress may have blown the fuse because the motor was working too hard.
Hi Rudy, i hope you can see this because it's an old video. My treadmill was sort of jolting me like someone else said like as if my weight was too much and then I turned it off and when I turned it back on it wasn't moving at all even though it said it was on a speed and then it stopped entirely and gave an E02 warning. I need to get some lubricant so that will be the first order of business, but also one side of the belt was very tight so I loosened, realligned, and tried to tighten them more evenly however it is still giving the error. Other than lube is there anything else? Also, how tight should the belt be, should it be pretty easy to continue turning, be almost impossible to move further...etc. THANKS!
My treadmill has been fine. Today I attempted to walk and when I turned it on I get a flashing code of EO1, have been trying to figure out what it is , any idea? thanks
my treadmill is making a loud rubbing sound, sometimes the belt feels wobbly like it is catching... the belt looks centered, it's lubricated in fact, I did a lot more lubricating, running it a bit then adding more silicone to make sure the entire surface was lubed, too much? how do you tell if the belt needs to be tightened? it's two years old now, I only walk on it, not run, probably used four, five days a week... 40 mins to 2 hours...I'm concerned, a friend with the same model told me she tightened the belt and now is having problems with it. So, I didn't want to just tighten it to test that. No one in my area services treadmills... great video! I've been feeding the skinny tube under the treadmill to lube it, it's tricky. And, glad to see you purchased the same product, I couldn't find the lubricant shipped with the treadmill, the new one seemed a bit thinner. Nice to see it will work. My on/off switch burned out, fortunately, "on" so I have it plugged into a power strip. It's an ok product for the price.
yes, I can't see what he is doing... one youtube with a superfit, the guy just lifts the motor cover off, on my machine, that part is separate piece but it does not lift off. everything I have tried so far, adjust belt tension, adjust motor and pulley, does not stop the squealing noise and some adjustments, made operation worse. Adjusting the pulley tension slightly did not stop but reduced the slipping but, it made more motor noise so I reduced the adjustment. NO way to talk to superfit, will not be my choice for a replacement and a pity, it was a nice small size...
