Would it be easier to tilt the machine on the other side? Looks like there would be better access to pump and connections.

The original wasn’t ply … why don’t you use the original material?

It seems as if you gave the deck belt link but not the drive belt link for Amazon

Anyone have a wiring schematic for the cd changer ? I have a wire not accounted for from the CD changer. and two wires from the truck wiring harness not accounted for.

Ford Edge 2013, only 1 key, and it is nearly dead. I’ve read a lot about this but, the problem is that I’ve been getting conflicting information. Yes I can with a spare key and the ONLY key that we have… and then NO you CAN’T add new key with only 1 key. So… as all of you know this isn’t something I can be wrong about I try. So, that being said, can these specific details, still be ok and get a second key on our own?

That amount of miles on a 1997????? 😮

I found 2 of the contacts had the green crusties. I used a little vinegar on the contacts then a little sanding to clean them up and now my ice maker is working fine.

Is this why use to see what the check engine light means

Bet that video was a lot of work to edit! Subscribed!

This is the BEST video about locked Motor repair in the whole RU-vid...Muchas Gracias....mi amigo...!!

How to share for family members.. Thanks

Well shoot... I got a 99 outside, but I need to sell her... (90,000 miles 5.4 2wd...)

Thnks a lot... Uve saved me

Great job on the video, very thorough. Thank you.

17:45 WaFaaaaa

anyway to set the camera to 24hr recordings?

My arm does not drop back down after it dumbs ice! Any ideas?

Where can I get the adapter kit with the cubby ect @? Sincerely:

Thank you for the video.

Yeah, so took the car in to have a struts put on. The guy told me had to take the CV axles off. I knew it wasn’t true. Good video. I could’ve done this myself.

Your video show nothing

Thanks for video, helpful, just changed my 2003 Thunderbird headlights. The mount was broken in my car too!

Can you recalibrate passenger seat ocuppancy?

I like this video showing how to attach the bottom piece, because I used the template that came with my hinge and it was too high on the side to close at all. I had to use the bottom holes and drill two LOWER holes to get it to close. Turned into a time consuming project. Thank you for your video!! Mine still slams closed, so I really do need one on each side like you did.

Just found this. What incredible memories! Of course I was only watching from the stands and that point but that band was always in my heart. Thanks Keith K. for posting this on here!

Thank you for posting this video. This solved my problem (broken pulley, worn out belt).

Get a simpson 3600 turbo nozzle it works great.

Can i use this with the prepaid xfinity router?

Were can i buy the seat covrrs to replace the old ones

Question, can you add additional phone numbers for the notifications? How many?

I hate mine. I can not keep it lit. I'm about to give mine away. I like my converted oil barrel the most. I use my oil barrel for everything besides briskets

Have 2003 f150 7700. No bt. Is there a ford radio swap with bluetooth? If so what year n model?

I came for the wiper issue, but experience with my last Expedition reminded me of the hatch issue right before you said something. There is a replacement fitting for the end that is metal and doesn't rot out like the original that is a permanent fix. May as well take care of that while you're in there.

Excellent video! I have had to replace the coil packs on my 2002 Thunderbird a total of 2 times since I purchased it, which was in 2005. Thank you, the video is very well detailed.

This doesn't work four years later. When registering it asks you for an 'Invitation Code' in 2024 and after following all of the above steps I never receive an invitation code so I can't get any further in the process from the 1:07 point of this video. Trying to join FORScan is more difficult than trying to break into Fort Knox.

It worked

I heard a difference between those 2

I was surprised it produced 50 psi oil pressure. That is quite a bit. I imagine it will fall some when the engine gets hot after mowing for a while.

My question is only my dimmer switch is missing somehow when I bought the vehicle. The headlight switch works. Can I just replace the dimmer wheel ?

Where did you purchase your ramps and how high are they ? Thanks 🙏🏼

I got one of these style chairs second hand. If you're not in it, it tilts back slightly. When you sit in it it's fine, until you lean back in which case it reclines. Just like a recliner. Do you know I can stop it from tilting too far back and lock it when I want? Thanks in advance, I've neen looking it up for a while but can't figure out what I'm doing.

Rabbit fell down at the stairs

Now this video is for the average Joe! Which is me

Naw you had to jack the suspension up to line up the strut it didn't cut off

Excellent video. Very well done. Just the right amount of content. :-)

Great little portable Scanner for Ford products!

Awesome video! Well explained. I don’t have this exact model but the internals are a perfect copy. The lower fuse in mine was open, same as yours. So this video was exactly what I needed. Thanks and God bless!

A little paraffin wax on the hacksaw blade makes it easier!

Do you have a link for the wheels for carpet?

Shows 899 and 9006 for the fog lights