How did you fix the problem with disk lost at the bottom right hand corner my hard drive not showing up I recently moved to a new location and was reinstalling the cameras
@@bigdawg6330 sorry for the late reply, I only have 8 cameras installed so far. My system takes up to 9 cameras that’s why the bottom right corner is dark. It’s means there’s no camera installed. Pretty much the dark right corner means no camera is installed or available there. I hope this helps if not, let me know and I’ll be more than happy to help u. Please subscribe to my channel if you have not, thanks.
@@justinberry3991 there are people in life all they seek for is wither a downfall or others or the negative things about people. Upon everything that goes on, a smile chirping is what u heard? Clearly it was an empty house I just moved in and I was taking care of everything in there step by step. I hope this answers you, Sir? Oh by the way, thank u for your service, I see the patch and if u didn’t serve but just love the patch too then cool. I believe the Army values clearly speaks about how soldiers must comport themselves in both on and off base.
@@amanaseboy zosi sucks. Had mine 3 years. 5 separate different zosi cameras and zosi dvr. Nothing is understandable with them. Looking forward to switching to that company A-something or nother. First Cav. Horse is facing forward. Was in Iraq 04-05 that's what made me the dick I am today. Would do it all again lol
I have a 2024 1794 myself. Gonna be putting on 1.5" spacers in the next few days. I actually like the look of the stock rims. Your truck looks nice! I'm still torn on if I should replace the grill though 😂
@@scornthwaite 😂😂😂thanks for the compliment and yeah, I replaced my grill and blacked out the mirror, and the plastic cover on the side of the grill. But yeah, go for it and make sure u torque down the spacers well. Good luck and please subscribe to my channel.
@@shampoo6563 it was far and there was no rubbings. I’ve 35s on now with 6” lift kits on and I had some rubbings when I make a wide turn so I put a 1.25” spacers and I’ve no issues again. U can check on my channel to see a video of it. I hope this answers your question. Thanks for checking my videos and please subscribe to the channel.
@@amanaseboyokay. Thank you for responding. You’ve been the only RU-vidr so far that’s been helpful with responding. Just from eyeballing it, it looks like it will rub the upper control arm, but I guess when it’s all said and done it will work. Thank you man.
@@shampoo6563 it wasn’t robbing. It started robbing when I put the 6” lift kits and 35s on it but I don’t have anymore robbing after I put the 1.25” spacers on. I can turn fully with no robbing.
If only the mods have something to do with whatever is broken or spoiled. You still get the warranty if the mod doesn’t affect it. I hope this answer your question. Thanks for your comment. Please subscribe for more updates.
I think it looks great. How is the ride? I have a truck just like that 1794 Trd and I’d like to keep the ride have basically the same rims you have all I would need is to lift and I also have air suspension in the back so if you can let me know, does it ride like the factory right or is it right roofer, I’d appreciate it
Thanks for the compliment. It rides great and no issues at all. At first it rubs when I make a wide turd due to the bigger tires but after putting 1.25” spacers on it, I can turn fully with no issues at all. I’ve uploaded a video of the spacers on my channel as well. But in all, it rides great with no issues. Let me know if u have any more questions.
Now that you have lifted the truck put bigger tires increase the drag coefficient dramatically be prepared to replace your turbo at around 100,000 miles. That’s what happened to me on my F - 150 because I’m sure as you’ve noticed once you had all that extra weight and drag your turbos are spinning a lot more.
Thanks for letting me know but I’m going to stick to the 35s but will definitely add 1” huh centric spacers to it. If I make a full or complete turn, it runs a little on the knuckles.
Did you get your grille OEM or eBay/smaller websites which come from china? I think I’m gona go the china route. They do a good job and come with light bar and ambers
Awesome save, I just had this problem since yesturday and was trying to hard reset my box and even my internet i tried everything. Saw your video and it worked sidenote (I hade to pull the red the black connectors for the cameras to get mine to work) I tried doing it your way but nothing happened. So if your camera has the red and black connectors, try unplugging those if the first method didn't work.
The bar light came with long wires, a fuse and a switch. You can connect it to the battery and through a firewall at the driver side to below the dash. The light should come with a manual.
I believe you tapped into the fog lights for your amber lights. Not DRL. I tapped into a fuse for mine just because I want them on when the drls are on. Not with fog lights
Well, they come on when I turn on the truck and off when I turn on the truck. That was how I wanted it. I didn't try the fuse but at least we learn something.
Hi buddy, sorry for the late reply. I didn't see this on time, however, I'm not sure what will be good for you. I used the stock rims, and I went 33x12.50R20. Planning on going 35s with the stock 20 rims when I lift it up next year. I think u should find out from your local tire shop to help u with that. I'm sorry.
very nice, i wished my 1794 came with the power steps. but i have the TRD options. i installed the ICON Stage 1 suspension lift. i recommend installing @Beat-Sonic inline amp to improve your stock JBL or Non JBL sound system.
I connected all of them to the shortest side of the DRL: Day Running Light on the bumper. Just strip the wire carefully and attach the amber light wires. I hope this helps. Let me know if you have further questions.
@@amanaseboy you have to remove the bumper to access the drl wiring ? I already installed the grill. All i need is to connect 1 wire to make the amber light to work. Thanks
@@juanito3.5 yes, I took the whole bumper down to be able to work comfortably but if u think u can do it without taking it down go for it. Sorry for the late reply and good luck.
So I changed both batteries and also the battery module and nothing and at the end it was Fuse #18 battery isolator. Is locate it under the hood fuse box next to the main battery open it and replace fuse 18 you can use the fuse at spot 57 which is a spare.
@@amanaseboy I see. I thought you installed the camera separately. If it comes with the truck, then that’s not what I want. Yeah, I saw you installed the bracket.
If I understood your question right, I didn’t take it to the GM nor neither did GM suggested. I troubleshot the fault and fixed it myself. I hope this answered your question. If not feel free and let me know.
Congrats on your new truck bro! Looks really good! To answer your question yes it will rub at 33 slightly and I have 32.5 and they rub slightly. Also depends on how aggressive the tire is. I hope this helps.
Wait hold up bro you must’ve put a remote start on your car cause I got the same car and I know damn well I ain’t have remote start all this damn time🤣
