Angel's channel on RU-vid is about sharing my hobbies, and I have a number of them as Windsurfing, Analog Recording, Live Music, Home Winegrowing, and Renaissance Man activities.
These movies are to share my experiences and help other people to enjoy life the way I have been trying. Now I am not active at Reverb.com or eBay anymore, got rid of these sneaky totalitarian bastards who care only for profits. Also, I scaled down to almost zero all repair and restoration works in Reel-to-Reel recordings I have done for almost three decades. Just like me, that field has become old, and fewer people care to use such amazing technology.
This channel is not for making money (I haven't made a penny yet). It is "Money for Nothing, and Fun for Free!". Do what you like and like what you do! Enjoy life and try not to listen to brainwashing "news" provided by the evil elite. Do not believe these multibillionaire crooks.
Enjoy this site and be blessed with good health and a meaningful life!
So good to see your video. I myself sailed the Bay Area spots from 2007 to 2023 non-stops. Sailed all the spots with Crissy field being my home base. Good to see the evolution of the gear in the last 20-30 years. I personally do windsurf, windfoil and wing foil. Foiling is amazing and highly skilled too. Wish you could have tried because it’s amazing. Can’t wait for your 2nd video. Thank you!
Hello. I must say I am very pleased with your many instructional videos you had made and time. Your knowledge is really great and many smart solution I'm really impressed.🏅 - In his video about 4-speed modification was something, wow! 🏆 I am really interested in and want to know a little more about that? I have tried to search the internet about it, but was unsuccessful. Can you please help me?🤓
I still have this same deck (my profile pic). It was my father's and I still use it all the time. Just made a mix tape yesterday. For something that is over 40 years old, it still preforms great.
Hello sir I'd like to ask can you turn my Sony TC- 580 to take that size reel and if you can how much will it cost, thank you so much and much success to your show.
hi have this model it don't like the small reels a tenson thing payed very little for it bro gave me money for it came from oxford u yes it porr's like my cat
hi have a otari mtr 12 with 1/2 head blocks why you may think because i was offered alot of zonal 1/2 inch over 100 tapes i can change the head block easy to do there's bolts 3 of them and it lifts of change over the 1/2 inch play head block in a deal and i have a 8 channel head block with buttons on it 1/2 inch so it's easyer to edit tapes
hi all the gold face one's are 20 bit there's a 16bit one with the same case size it is a 16 bit i put a tape in to format XT deck i have 3 gold front 20bit the rest is 16bit 4 working black face 100% working they get little using time love to have them around i get offered gear all the time not to sell on alot of it because i can make more money moving audio of the tapes the last one i picked up he said he move the audio of and just re sell the deck to me
hi i have a up date i ripped apart a deck to do alot of RD on the last deck i did find alot capstan motor can run like crazy beware all the wire's in the plug that goe's on the servo pcb left it of one wire motor went crazy speed note the main pcb you don't need it the deck can run on a computer pie the counter is bad on my deck the main pcb is going bad so i got a mate to dip it and send all the parts back to me there is key parts needed i find in the tascam 38 decks i did find out how the power trans work the tenson side i plan to post a video this year you know them 14 inch tape you had i am using them with otarii mtr 12 motors and info i got from the tascam 38 deck RD work on that scully 280-14 i pulled apart
hi watched you video sometime ago you put me in the right place to look i have one tascam 38 that was in a very bad way note i had the main pcb put in a solder bath the main pcb was bad and i started to re make the pcb and all i needed is some key parts the power ic's for the motor's and coil power ic's now i have a working mk 2 for playback only it's for cue the tape and editing on i have made the deck so it can spool the tape like on my otari mtr 12 i worked out how the tenson ic's work you know the fine speed knob i changed this to a step speed knob 3 3/4 7 1/2 15ips danger never let the capstan motor run are full speed you up set the solder tabs in side the motor i did this the motor started playing up till i resold all the solder parts i have some teac 1 inch heads i was using them like you said till i got my soundcraft 381 - 2 speed deck i jazzed the speed on this as well to be the same as my brenell mini 8
Allow me to say this is not the best way because the openings for the screws on the flange have raised edges and they will scratch the tape as you are gliding it especially that you did not even open the cardboard box entirely There is a better way and I used it on 250+ plus pancakes without out losing a single one Your slide your finger under the NAB hub and you keep the pancake in vertical position then you take the flange and line up the openings and pluck it against the pancake then turn the pancake and flange with flange facing down the pancake up, put the next flange on top et voila Thank you
hi i have to do alot of work on 6 tascam 38 getting there now fold bad audio card just one only just note i have had to repair bad breaks in the main logic pcb age is getting to them you have a had t find model with the record LED 'S my 34 is is like your deck i have a tascam 38 that is play back only i jazzed a new logic pcb for it note used to have a otari 50 50mkIII it went very ill lost the deck big time when i was looking in to how the tascam 38 works i need find alot out i desolder al the bad logic pcb to find what is bad and started to put all parts back in the pcb is to bad to use it what it's a of i did find all t power trans side of the pcb is ok so i have the deck running with out the counter the used main pcb would be over £120 if i can find one and it could be bad as the deck can play 7 1/2 i am ok with it
I still have one of these in working condition. Time to set it uo and play around with it, I bought it new in the med to late 1980's for $2700Cdn Didn't get much for your money back then, The mixer is still worth having around with 8 channels of analog pre-amps.
I might consider it... but my landlord has just decided to do some renovations to my apartment and I won't be able to test it until he's done. Want to be positive everything's in working order. It was when I tried it last September @@quasar1
Is there any sound difference between the 4 track and 2 track model if you would play for example a tape from "analogue productions" or "the tape project" which are in stereo 2 track recorded?
😮 This model is the older Brother of the Akai X-330 before take over.Very nice machine(X-330)& very versatile being able to take it outside with its built-in portable speakers,nice deck.
hi got a otari mtr 12 motors in a scully 280-14 i got the know how to run the motors out of a tascam 38 the pcb in the tascam 38 had a bad break so i got all the good parts out put the in a bag cut the pcb up in to to parts i needed ordered the same power trans wow the deck run's like a dream using mixed tec 2v dc to 5v dc in to the first ic the 2nd one deal with the power i been talking to tec's ac motor's are a pain dc you get alot more power and i can jog the reels to now i have a jog wheel on a tascam 38 as well it's been jazzed up easyer to edit tapes the deck was very ill so i had time to work it out
hi have alot of this model i have one it looks ok from the front the main pcb was bad i made a work around for the deck i had to jazz it up ones with heavy wear you have to do a work around i have to make a video next year with what i did my deck has the spooling like i jazzed the tenson and made new rollers for 1/8 tape i have the basf reels 8 1/4 very hard to find now
I'd like to know if you can put a 10 in reel on it, I bought one like it I'm hoping it will work please can you please let me know if I can put a large reel on it a 10 inch reel because all the ones I see on u tube has a 7 inch reel on it. Can you let me know if I can do it thank you very much
Hi Angel!!! Hey and appreciate the video. I have been looking for anyone that can rebuild me this power supply for years. I was the guy who begged Fostex Corporate for the service manual that now seems to be the only known source that I've found (xunt was my username on the forum). After much deliberation, the young lady answering the emails randomly sent it so I immediately posted it to that forum (I can't recall the name but it's pretty generic and well established community). I have the original pdf if needed. I sent all this info to a few master electricians and all of them pretty much said that the power supply was too complicated for them to recreate or they simply did not answer. I assume they did not care to perform the job.. Is there any way I could get any info or even a crude blue print of what you did in order to get it operational? I would so greatly appreciate it. Just understanding the various output voltages and how it is pushed through the 460 would be incredibly useful to know. This is a project of mine 5 years in the making. Although I tried to buy the last power supply sold on reverb (listing from Greece), the seller would not sell to me since I was a "new user" at that time. My goal is to take all the info I have and possible get a craftsman to build a few of these so it and the blueprints of same can be available to anyone looking to buy or build their own. If there's any responses to this please please tag me in your reply so I don't miss it. I sincerely appreciate any consideration and thanks in advance!
I bought a tascam m216 off reverb or some similar mixer and the guy accidentally sent me one of these, still hasn't sent me the tascam, but I am also extremely determined to try and find a power supply because of course it was not included. But I am desperate to have these many channels, preamps, and this much power for a cassette recorder and mixer at once. I have been following your forum posts for a while now and I would also like to keep updated
I have one of these which has been sitting idle for decades due to a fault in the transport in play mode. I hesitate to part with it for sentimental reasons (was my late dad's). A tech once looked at it in the 90s and concluded the custom governor IC has failed, which is no longer available as spare. ☹ Haven't found the time to look at it myself, tho. When it worked, this was an excellent deck. The sound quality blows cassettes out of the water.
Is this just a bad joke? They cant sing, cant keep The tunes, tired, bad voices an cant play guitar at all, terrible sound, terrible picture quality, boring song an so tired as one are when one just start to sleep and drunk, no energi, no talet and... and and and so on... The worst ever heard. Terrible😡😡😡😡😡😡😡.... 👎👎👎👎👎👎....
