Hello Everybody My name is Elijah, creator of 85 Studios! welcome to the channel, I am a gamer, a Blogger, Electrician, Mechanic, engineer, Singer, inventor, Musician, Writer, Director, comedian, and a Motorcycle rider, an overall good guy with a big heart. Check out the channel, and see if I have earned your subscription, and maybe a Like!
Hello, I found your yes/no emf on thingiverse. I am using an Arduino nano board as the controller. I have it all connected but all it does is chirp like a smoke detector. I currently have the ground leads hooked in to the ground output from the board itself. Do I need to change how the grounds are hooked in or is it a coding issue?
You will have to trim your antennas to suit your needs, if it is chirping constantly, shorten the length of the antennas, if it is not chirping at all, you will have to extend them, remember also that if you are plugged into a grounded source of power this will not work, you have to be ungrounded and on battery because the ground will interfere with the signal. Think of this circuit like a dual theremin when something gets close to one side, one side lights, when something gets close to the other, the other will light, this way you can get yes/no answers keep your antennas apart far enough that the two will not be triggered at the same time.
You are very welcome, if you have any other questions of run into any other trouble please let me know, I have this all sort of figured out by just tinkering with it all over time.
I hope not because that mod had been deactivated for months, I will check it out, I think it has been deactivated. Troyboy and I were playing around with mods on this map and we had that mod, but as far as I know we turned it off and removed it from our mod folder. Thank you for bringing this to my attention though so i can check it out. You might have if it is still active.
Oh I saw what you saw, it was an oven, but it looked odd because of the angle and the way that the texture pack was, and as quickly as we passed it. so no worries, but.. good looking out man I totally appreciate it!
Hey buddy! I know you're a real-life crime documentary lover. If you're interested, check out the latest documentary. This documentary is filled with real stories that go beyond the ordinary!
You have toe export the decal you made, and it exports to mods/unpack/"the name you gave it", then you zip the vihicles folder there, en give it a name, and put it in the mods folder, then you have to move the folder in the upack folder to an different location outsice beamng, or delete it.
Dude this job is a nightmare, I want a different one, I have been so tied up at work and so tired from work I don't even have tome to record videos anymore, I can't sleep and I am super tired. Something has got to give, this isn't worth it anymore.
I would like to, but they are no longer accepting applications and Applications right now are closed, I am not currently a member of OCRP because I went Idle, I was on the server for a long time just as a player, but my membership went stale when I decided to take a long break from playing. If I wanted to play on it now I would have to apply again and get accepted to the server, that might be a while, I just don't have a lot of time to be able to play it anymore.
So the reason why we do not have any codes for anything other than Cylinder misfires, rather than Fuel Air ratio codes is because in order for those codes to be thrown the engine had to become hot enough to go into Closed loop and then it will throw the code after a while, sometimes a couple minutes or so.
Wow my math was way wrong. 250 Right.. So 3 People DOnated. @Wolfmooon3431 Thank you for your donation of $100 And 2 others donated $20 Each. So we are still $110 down and my math in this video was terrible. I think it is the stress and Anxiety that is to blame and lack of sleep. But thank you all so much. I am going to do some Automotive work for a friend here soon who might be able to help me out with more funding if I can fix the Automobile. It is a Kia. I like Kia's okay, it is a van. 6 cylinder.
Also Not sponsored by them and they did not give me anything to say this, but Flex Products like Flex Seal, Flex Paste, and stuff like this, Amazing products. Oh and Mother's and Armor all for leather, upholstery, and detailing motorcycles and cars. Super clean has a Tire cleaner, they sent it to me, but I have not tried it yet.
I thought about that, but I wasn't sure if that would actually work. Also I have this new Monitor if you have any ideas on how I can make the screen less reflective, it is like a mirror basically, so if you have lights on behind you they show up in the screen as a reflection. And also cleaning it is a pain.
I don't recommend it for monitors or anything that needs to be shiny or is reflective, Monitors, Mirrors, or glass, It leaves a film and makes them streaky. I wish they had a product for that, but not Superclean in my experience.
No the FMX is very touchy, too much or too little fluid and it will not shift. This is an old video, but I also discovered the real reason why this was random no shift. THe transmission front pump went out, it is still out. I have to drop the transmission and replace the front pump, and I am waiting because I am going to rebuild the clutch packs inside as well.
Hmm.. Trying to think of some cool short things I can show. It's kind of random. There are neat things like this though, lots of them. Don't know what I should show next. I will think of something cool or unusual. I treat shorts kind of like Tik Tok
@@85StudiosI wanna see, RU-vid shorts is usually boring no matter how much I adjust the algorithm and I’m glad I came across something like this. Also Are there any other experiments you could try using what’s in the video. The fact that you touch it and it lights up... like dude.
@@Eleventyeleventh It is an interesting thing. Kind of like a Free source of electricity. I wonder if we could use it to trigger something or to charge a capacitor or something, but to do that we may need more than 1 minute. Might have to make a longer video. I am not really used to the Shorts format, so I will see what I can do and make a longer video and then try to clip a Shorter video out of it. I am still trying to learn how to make a shorter video out of a longer video from the channel, but I will figure it out. I will let you know.
Saw your comment about this on Facebook also, I did try this, but I found that the scammers will just make another bot and post similar replies using a different name once they see that they can no longer reply. I found that by blocking the keywords most commonly used by a majority of their bots I can effectively block any bot they create no matter what the name of the bot is.
I moved in to a rental that was a smoker house for 6yrs me and landlord made a deal for security deposit and I used super clean on my Jeep for years and I bought a 1 gallon jug of super clean an did 50 50 mix in a garden sprayer and a scrub brush with then using cheat dollar store towels to wipe dry and repeated with water and drying walls the got a paint sealer and repainted whole house and look great
@@edwardstill8577 Yeah especially on paint, if you are planning on not painting something, also it says do not let it dry on Painted surfaces, so spray it on and immediately wipe it off, I think it contains compounds that destroy proteins, so I would highly recommend keeping it off of automotive paint..
@@robertmichalscheck3072 I am not really sure on that, you might have to experiment with it. They recommend that in order to test it you put some on a cloth and test it on a small inconspicuous area. Sorry I have not yet tested it on Larex household paint, however I can say I have tested it on Wood, Varnished surfaces, Automotive Paint, Plastics, Clothing, Bed Sheets, Matresses, Polyester, Vinyl, 3D Prints, and computer monitors. If you do test it on Latex paint let me know what it does I am sure you are not the only one who wonders. Share your findings. Seems to be a legit product in my experience so far, but I haven't tested it on every surface. Oh.. I should add, it does not damage monitors, but it does smudge them, so probably better off with either windex on a cloth or possibly something specifically for that. FYI.
Yeah, but she only goes in there because that is her place where she can be alone, If I leave she goes in and then she comes right back out when I get home, this is to prevent her from being destructive. She has very bad separation anxiety ever since she was a puppy. She also sleeps on my bed and she is an indoor only dog, I love her like my own daughter, and would never do anything to her to make her uncomfortable or hurt her. I am a good hooman boy to her.
There are microphone and speaker which had double sided tape and should not be removed from the helmet unless you want to replace them, so unless you want to use my helmet I cannot lend my camera, but I can show you how and where to get one exactly like it. they are good quality cameras, this one is called the Sena Prism tube Wifi Camera, it comes with it's own in helmet mic and speaker system to tell you what the camera is doing and GPS Navigation. I usually turn that off so that it is not cluttering up my Screen, but I have a HUD that shows me all of that info I can also show you where to get that. HMU and I can give you the links. @TroyBoy
Yes I have the raw videos, but I don't understand what a lot of them are saying, I caption them with what I think I hear when I am playing the video with headphones on. It may not be accurate though.
Keep up with posting nice some projects, adding some best practices along the way. THESE are the videos that get the reluctant n00bs to jump in the deep end with us! Heheheh!! Cheers!!
At least on digi-key, and most major producers of transistors ( 4 or less pins - chips in general, has been my experience...) Isn't the pin-out right at the top, usually on the graphic... As for helping hands, your spot on, but I would add - spend the extra few bucks, and grab the magnetic ones with a cast iron base... No need to send thanks, it's just better in nearly EVERY use case I've come across in 20 something years!! 😅😁
Usually they are, but I seem like I am losing my vision so I have to be very careful when I am reading on the chip itself, but I order most of my components from TaydaElectronics.com and they do not put them on the packaging, it is cheap because they just come in bags are are pretty generic, this is okay if you know which chip you are pulling from the bin, but if you are like me and you have the bins divided out into "what component, and you can's see the really tiny text on them, well I always have issues. Once I get a part number I can usually get the pinout for it though.
Oh also on the Magnetic Base Helping hand thing. That would be incredibly helpful. the one I have now is fancy and has a light and magnifier build in, but it will not hold the parts for me and has no magnets, so I super glued some small neodymium magnets to the metal tray and they magnetize it. Also I use a lot of Neodymium magnets for all kinds of things, they make life a lot easier when you need a helping hand, but I never knew about a helping hand that has one built into it, that is very interesting though and I will definitely check it out.. so thanks again!!
Check out some of my new videos, this one is ancient. 6 years old now. The Audio on the newer videos is much better on the newer videos. Especially 2021 and up.
3:50 does anyone else see that person standing in the front of the trailer? there was no one else with us and no one was supposed to be there! can anyone confirm what I think I am seeing here? WTF is that?
I have a 1959 el camino with three 2bbl carburetors. When engine gets heated up the engine dies. Can start back up immediately. Have installed dash pot but still dies when heated. What would cause the problem.
Does it do this when it is hot outside as well? Make sure that your fuel lines are not close to anything that is going to get hot. With the way fuel is nowadays with Alcohol in it, it will vaporlock and shut down easier because of the lower evap point of the alcohol in the fuel, not only that, fuel pumps can't pump fuel in it's Vapor form, only in a liquid form, and even if they could you can't fill a Carb bowl with vapor.. It don't work that way. Joking of course, but I seriously suspect vaporlock, make sure the fuel lines are not near the exhaust manifolds or headers and that they are away from the engine until just at the point of entering the carburetor, I have also seen some of the older gassers at the strip wrap their fuel lines in aluminum foil to keep them cool.. kind of acts like a heat sink.. Never tried it myself, but It seems like it could logically work.. maybe.. I wish you lots of luck.
This video was stunning even to me! I did not think we caught much more than EVPs and maybe some voices on Spiritbox until I played it back to cut it. The Shadow could not have been from Troy or I because the shadow has to be in a direct line with the light and the person casting it, but that shadow was not!!
your prayers must have done a lot. thank you all I am cancer free, they got the results of the biopsy back.. I was sweating so bad.. It changed me, I feel like I have a new lease on life and I am not going to take it for granted anymore!
Lol it still runs to this day. Used it yesterday in fact. it is a work horse around here. Just chain some pallets to it and drag them to the wood pile to be chopped up and burned in the stove. Good strong engine. Sometimes a bit of a bear to start when it is cold though.
Hello everyone. Troyboy here I do work swing shifts that alternate in days off every two weeks unfortunately but we can make time for new videos and content it's just a matter of finding out if I'm on 13 hour days or night shifts. I never get the same days off each week and that is the weird part of my schedule but we have some new ideas for videos and we will keep you posted. Thanks so much for the subscriptions and take care everyone.
