Thanks Vera! Great info man! God Bless!🙏🙏✌

Thank you so much for this video. I recently purchased a gmc vandura 2500 (the g20 counterpart) and I'm having steering issues as well. Old hardware on their and it's due for an overhaul. This video inspired me to DIY with my friend. Please please make more g20 videos. I will watch all your videos and like and subscribe.

Horrible design

This was a solid video, L.M.V! Thank you!!

Got a 82 chevy van previous owners payed alot for a hightop to be put on im lookin to trade the hightop for the metal roof so i can weld the original roof back on.

Hi im new to fixing my own truck. Will this stop my ABS light from blinking? Also do you have a video on bleeding your brakes by yourself? I have no one to step on pedal

man this really help me on my 240z was also avoiding the door stuff on my car but this helped a lot.

the nut on the line to the brakes was smaller than the hole in the proportion valve. the line that gets deleted, has the correct fitting, so I cut the line and took that fitting. removed the flare on the line to the rear brakes, and put on the larger diameter fitting and used a flaring tool to re flare the line and re connected. tools needed pipe cutter and flaring tool . all fixed, no parts bought, ABS GONE.

PLEASE DON'T make another video!!!!!!!!!!!! Until you know what you are doing. Damn man

Where does the silver line goes to? Where does the black line goes to? I need to buy the lines but don’t know where to connect them.

Wait hold up we had to watch the oil drip out but no view removing the filter 😢😅

But did it work ?

So this is what I'm finding out about POA 80. It's all a mystery. (Try searching the DMV website for POA80 and POA 80. All you get is "Power of Attorney." ) I got this code, paid $600 to have the 'battery rebuilt' still have this code. Can't pass the smog test. Doing a Google I'm finding, "Oh you have to drive it for 100 miles, no 200 miles, no at least 1500 miles... You can't have AC or Cruise Control during those miles or they don't count.... Oh only engine miles count, nothing you do EV only.... No, it's 15 starts, warm up, cool down cycles.... there's no clear answer This is nonsense. What really annoys me is my Prius V runs fine, gets the same gas mileage it has always gotten, before the code, before the repair and after the repair. From the video I did learn that it probably didn't take the battery shop a maximum of 3 hours to take apart the battery, test it, replace the bad cell, reassemble it and call me.

Just picked up a g20 recently, was your abs light on before you did the breaks?

Dealing with this same problem on a 95 Sonoma, thanks for showing us the easy way!

I did this, hopefully whenever i bleed the brakes they work...they started feeling spongy when i changed the front calipers and lines

Want to do cd009 swap what did you use for headers?

What did you end up using for headers

Hey what clutch did you use?

What clutch did you use?

Was it slowing down on its own when your was off the accelerator.

Great video… Were your two shims pink and green and did the green one go in the front and the pink one go in the back?

Thanks

How much cost $ pls l understand but how much can l get the tel numpls

I changed sensor and bearing and the light is still on ,code can’t be cleared and i have no signal from front wheel sensor

Thanks for your helpful video. Im located downunder in Australia, I bought my 1993 GMC Vandura conversion van from my friends Jon and Mandy down at Escondido. I then toured the west coast for a month then later shipped the van home. Its my favourite vehicle and now its losing water from the top of its radiator core. Thanks to you I have an idea what to expect, my problem will be trying to source the correct radiator. I suppose I'll dive right into the job and see what will work. Best wishes- Rob Melbourne Australia.

the 6th gen accords that weren’t given abs have rear drum brakes and the abs cars have 4 wheel disc for anyone wondering about his brakes

Changed the part cleared the check engine light but i still get the p1450 code when i hook up the scan tool. Its showing it as a permanent code. Another issue?

Awesome, thank you for the information. God bless you 🙏🏻✝️

Side you are doing don't

I have a huuuugeeee BUCKING problem with this model

Funny, I was just watching your brake video again and before all of my parts get in I developed a radiator issue in my '95 G20. Oil cooler inside the radiator ruptured and is mixing oil & coolant in the radiator. Picked up a new water pump and thermostat and a new radiator and hoses are coming in the morning with new oil cooler hoses but I am flushing the system first to get it clean. The fan shroud part was funny. My shroud was in two pieces, broken just to the right of the filler. Now I know why, someone did that to get it out 😂.I was able to twist mine and squeeze it out from the left side by force. I had a '94 G20 10 years ago. I miss that van but I did not miss that damn AC line over the shroud. My '89 G20 was so much better. The compressor is on the passenger side with no AC line in the way. Made engine work a breeze. I have no idea why they moved the AC compressor over to the driver side on these vans in the 90's . Such a PITA.

I appreciate the video it helped me out for my G20 Chevy Van Thanks a lot Blessings

I have all new rotors, wheel bearings, calipers, pads, rubber lines, rear drums, shoes, hardware kit, adjuster kits and wheel cylinders ready to go. I even got new clips for the rubber lines. Still waiting on some odds and ends and speed bleeders so I can bleed the brakes myself but I will be jumping into a full brake system rebuild on my G20 soon and your videos have been a nice reference to double check everything I have to be sure there are no delays 😂

Great video! I've got to tackle my doors soon! This definitely will help. Appreciate your help 🙏

My door does the same exact thing

That chickens 🐔 are getting excited 😂

Thanks LMV I have tried everything to get some pedal in my 1993 work truck. Your fix worked, I had tried everything.

Great video. I noticed a slight leak where my front driver caliper meets the brake hose on my '95 G20 and while inspecting the rest of the system both of my rear wheel cylinders have started to leak so I will be replacing all of the front and rear brakes in one big job. Your videos will help as a reference to get it done as quickly as I can. 🎉 I did the whole brake system on my '89 G20 back in 2017 so it's been a while but it'll come back once I get rolling 😂

Thanks for this video....have an 85 chevy g20 motorhome that needs new brakes after it locked up on me whist driving.....scary. Difficult to find some bits here in the UK but great info for parts numbers etc

Little tip to make this a little easier 1. When taking the clip off, un bolt master cyl. So you can depress brake petal fully and the clip will pass into your vision and you can take it off MUCH quicker without getting pissed. 2. If you don't have power tools use a flex head ratchet 3. If brake lights stay on for no reason when completed there is a sliding switch on brake sensor, slide the switch away from the firewall. 4. When getting top right bolt out remove the plugs from the steering angle sensor you get more range of motion. (ABS vehicles only) Amazing video just wanted to add a few things.

Beautiful buddy i have a 07 going to do today looks simple thank you you explain very well

Dumb shit

It doesn’t have a Radiator drain plug?

Yeah, vans can be a PAIN to work on, but you did a great job and a good hack!

Great video 👍 this guy kinda resembles actor Lobo Sebastian or maybe i need to get some new glasses 😊 just subscribed

This should be same for 88 gmc c3500 ?

Too much blablabla. The really important things are not explained .

Update 1 year later? If the codes were only popping up everytime u took it to the car wash then my guess wld be that somehow water is getting to the battery somewhere

Did it work?