I've just snipped my outside internet cable today thinking it was my telephone cable! Shall i can my internet provider and say my broadband not working and act dumb??
It's generally better to be honest with your internet provider. Explain that you accidentally cut the cable and ask for assistance in getting it repaired. Providers typically appreciate honesty and will be more likely to help you quickly and efficiently if they know exactly what happened.😊
I have wirless system . I want to convert to wired . I have NVR with biult in monitor. NVR with one port. 1 cam can be connected directly. But i have 8 cams . I buy TP link 8 port 10/100 mbp switch . I connect cams to switch and NVR but not working. Plz guide this need router or some configuration? If router needed so Internet needed or not ?
Donon cable ki ek side mein colour alag Hai aur dusri side mein alag hai Baki sem hai bro ek side mein yellow aur white hai dusri side mein brown aur white Baki to maine theek Laga di ine donon side ki cable ko kaise theek Karen
Dear, If you have a cable tester, use it to check the connection. This will ensure that the wires are correctly connected and that there are no issues with the joint.
hello, do you think this works for the new ip cameras that also record audio and are full color... do you think that by making this connection it would record audio or only give video?
It seems like you're describing a setup using Cat6 wire with an RJ45 connector on one side and a power supply on the other side, possibly for a 2MP IP camera. This setup could work to provide both data (video and possibly audio) transmission through the Cat6 wire and power to the camera through the power supply. Just make sure the IP camera supports this type of power and data configuration and that you have the correct wiring and components for the connection.
The power supply's capacity should be sufficient for four IP PoE cameras, but it depends on the power requirements of each camera and the total power output of the power supply. To ensure proper functionality, you should check the power consumption of each camera and verify that the total power requirement does not exceed the 10 amp capacity of the power supply. If you're unsure, consult the camera's specifications or seek assistance from the manufacturer.
Dear agar apki wire achi quality ki hai our pure copper ki hai to 100 meter par giga switch par ping ok aye gi .....magar joint sahi tarikay SE bana ho Jesa k video mein banaya hai .
Nice video. If I need put power a IP camera but transmit data too only use blue + and brown - colors (just one cable each) The others color same in connector. Thanks
In your case, you mentioned using the blue and brown wires for both power and data. This is possible, as long as the cable you're using supports PoE and the camera you're connecting is PoE-compatible. However, it's important to make sure that the cable is wired correctly to avoid any damage to the camera or the equipment providing the power.
Dear I watch your video and its good idea Allah Swt bless you Little advise for you instead of adding music Try to guide young men how to relate cctv network from scratch Guarantee you will get a lot of audience
