Thank you for this video. Quick question. I just purchased my Atem Mini Pro and my use will be to do training with clients using Zoom and I want to get my program out to a monitor so I don’t have to keep looking at the Multi view at another desk in my setup. Will this device work for this situation or do I even need this to accomplish what I am trying to do?
Thank you! this is most helpful! did you ever try capturing the video from the ATEM Streaming Bridge into the computer and stream via zoom? I want to this so I can recored all iso's on ATEM mini pro iso and stream to zoom at the same time. Thank you.
Thanks for the video. Super helpful. Any way to reduce the delay on the streaming bridge so you can use it in live to screen for Church or conferences in a live venue?
Dude this is amazing, giving me flashbacks to working in TV news and how all the tech comes together so seamlessly. Crazy how accessible it all is these days
Hallo, ich bin Fotograf. Ich möchte Blackmagic Television Studio Pro 4k kaufen. Ich weiß nicht, ob es gut ist oder hat technische Probleme. Was ist der beste 4k-Mixer? Danke.
Really good question. It's my understanding that it is NOT bi-directional the way you're hoping. I believe my dad would have to have a streaming bridge on his end as well.
You got an alternative if your HDMI Out doesn't work anymore? ... Actually nevermind you might have solved my problem.. "Use the Bi-Directional Converter" --... Imma try using that and see how that works.
That photo is actually from a live stream at a music venue, where we put the audio mixing console in the building next door so the audio engineer can hear properly. Since he was in a different building, I sent multi-view to him over HDMI. I was actually using my bigger flypack (you can see it in another video on my channel). That said, in the setup I show in this video, I'm sending program out of the ethernet port (by way of the streaming bridge), and that leaves the HDMI output sending multi-view. If you send that HDMI into a bi-directional converter, you'll get get both HDMI and SDI multi-view outputs. Does that make sense?
Good question. I honestly haven't been using the ATEM Mini Pro much lately. But I think you'll be able to use software control and macros with the USB-C port.
Thank you for this breakdown of your flypack , construction, I had to use snip-it to get the wiring diagram in order to make sure I order the parts correctly. For other looking to replicate this Fly pack the Patch cables are 10 SDI, 4 HDMI, 8 XLR
Very awesome walk through........have similar camera and lighting setup but looking into getting into the streaming aspect but have not been able lock down what to charge for this kind of service with audio and rest of stream package.
Figuring out what to charge is brutal. I will say that when doing a live stream, there is way more prep work (ie. meetings, graphics prep, etc.). So definitely ask a bunch of questions so you can charge for all of that work.
Very helpful video! Did you have any issues syncing your audio with the different cameras (A7s and Eva1?) I am running into an issue in a similar setup where I am running an EVA 1 (direct SDI feed ) and multiple GH5 cameras (HDMI to SDI conversion) into my ATEM switcher. The processing time of my GH5s have a 5 frame delay when compared to the EVA. Did you have similar issues with your A7s? If so, did you have a work around. Thanks
Oh man, 5 frames sounds like a lot. I did not have that issue. All the cameras seemed to be synced up pretty well with each other. We did some audio delay to match the audio to the video and we were in good shape. Direct feed, too...strange. Have you figured out what was up?
Great video . Looks like you solved one of the issues with the atem mini switcher I wish they gave you a live preview via usb as well . Or via Ethernet protocol . So that you have two outputs . Anyways my question is regarding the atem bridge . Say my client is remote and I pre set the atem bridge and atem software from my location then ship the camera and atem mini with xml file already saved and everything pre set . Do you think it will hold settings for my client to simply hook up to WiFi or internet and hit stream on the atem ? I mean all the work would be done by me before hand local network with atem bridge and port open and atem software installed and pre set in clients computer before shipping ?
Hey thanks. Yeah, I believe Blackmagic intends for these two devices to be used the way you just described. I’m not certain what how reliably the ATEM will retain the default stream settings you load with your XML file. I seem to remember having to reload it after a certain amount of time. But that wouldn’t be too tough to do remotely.
@@YayYouDidIt true . I’m doing some test now . My other concern is how much traffic it’s going to add to my internet source . Right now I’m using a mobile SIM card pepwave hot spot set up .
ATEM Bridge Stream to RU-vid and Local LAN. I need to stream to RU-vid and directly to local monitors on my network. RU-vid stream for remote viewers. Sending ATEM output over local area network to monitors in another room. The stream cannot be the multicast view since it is used by the video operator. Any suggestions?
Hey everyone. I appreciate the kind words and that some of you have learned from my experiences! I dove deep over the past five years or so on multi-cam and live streaming stuff. However, I’m not really doing a lot of this stuff right now, so there probably won’t be a lot of opportunities for me to make these set-up explanation videos. That said - I do continue to check these comments and respond to every one that I can. You can also email me at info@yayyoudidit.com and I’ll help if I can!
Hey everyone. I appreciate the kind words and that some of you have learned from my experiences! I dove deep over the past five years or so on multi-cam and live streaming stuff. However, I’m not really doing a lot of this stuff right now, so there probably won’t be a lot of opportunities for me to make these set-up explanation videos. That said - I do continue to check these comments and respond to every one that I can. You can also email me at info@yayyoudidit.com and I’ll help if I can!
Hey everyone. I appreciate the kind words and that some of you have learned from my experiences! I dove deep over the past five years or so on multi-cam and live streaming stuff. However, I’m not really doing a lot of this stuff right now, so there probably won’t be a lot of opportunities for me to make these set-up explanation videos. That said - I do continue to check these comments and respond to every one that I can. You can also email me at info@yayyoudidit.com and I’ll help if I can!
You’re actually the first I see using QLab in an Atem environment. Very cool setup. Do I hear Music from Audiio? ;) my question is which converter you use from your mac (?) greetings from Amsterdam ;)
Hey Philip! Yes, that’s Audiio! What do you mean by converter for my Mac? Using a USB-C to HDMI cable to send the Mac into the switcher. Is that what you mean?
Great setup, very educational. What is the confidence monitors you are using and are these monitors equipped with SDI inputs? Also what is the SDI splitter you are using to send signal to these confidence monitors? Thanks!!!
Hey! The confidence monitors on the floor are just cheap tv’s I bought at Target or elsewhere. I’m using cheap Blackmagic SDI to HDMI converters on them. There is a confidence monitor on the camera that is shooting the podium. It has both SDI and HDMI, but the SDI is like a mini SDI. So I use an adapter cable for that.
Great info. I also have a LiveU Solo and an ATEM Mini ISO. The streaming bridge gives me back my multi-view when remote streaming with the LiveU / Solo.