Life saver, took me longer than 17 mins but I'm done 😂 had to undo it again due to leaving one of the wires over the regulator meaning it wouldn't wind all the way down! But all sorted now
Just saw your content now...i have a question I Noticed when I step on my brakes my brakes lights don't switch on instead my 3rd brake light on switches on... Checked my Fuses And They All In Good Shape Might It He The Brake Light Switch?
No it can't be the switch because the 3rd brake light is working. if none of them were working I would say its the switch. Check the wiring plug on back of the light might be burnt out or maybe you have the wrong bulb in it.
Repent to Jesus Christ! Luke 5:32 King James Version 32 I came not to call the righteous, but sinners to repentance. Luke 13:3 King James Version 3 I tell you, Nay: but, except ye repent, ye shall all likewise perish.
So if i wanted to do this at home? Axle stands, jack, and a spring compressor. If i dont have those bits.of kit, is it more econic to get it done at a garage? Oh. I have 2 broken springs.
Great video. Been looking to do them myself since my local mechanic quoted me £240 for drums snd shoes on both sides. Not sure im confident to do it myself, is £240 a good quote?
those bolts are terrible, so tight that it sheared off the bit it was screwed in to, because it was so rusty :) the rubber hangers are really hard to get nay purchase on too . happy days
Thanks for this great video mate as it helped me a lot. I nearly gave up as it was the most fiddly annoying thing ever. Hardest part was locking the pins in place while holding the bulb in straight. Putting lead back on was another 20 minutes 😅
Brilliant video, helped me alot when doing timing belt on 2006 seat Alhambra 2.0 TDI. Only thing is, I found you don't need to drop the engine to get that lower bolt off the engine mount, you can pull the bolt out as far as it will go ( it's still in the mount but not through to the engine) and pull the engine mount from the top with the bolt. 👍
Great video! I have the same car and I should replace glow plugs...What kind of glows plugs you was using, is there same brend that you can recomended?