What pole did you happen to stick in the sail pole mount area? I’m thinking of doing something similar for a camera mount but can’t figure out what will fit
Thanks. Most helpful video. A couple questions please: 1) would you give us the URL for the black keel guards? I couldn't find anything as you described it. 2) How did you cut the marine mat (and URL) so that fits so well. Thanks in advance for your help.
Sorry for the delay responding. I don't think there is a drag issues. Maybe the extra pound or so from the weight of the keel guard does, in theory, slow me down, but it is nothing noticeable. I have more peace of mind with the keel guard on than the possible miniscule drag it may have. Thanks
With tax, a Lynx is now over $3500 and you spent how much trying to protect the fragile hull. As much as I wanted a Lynx, I am going to wait until Hobie addresses the hull issue, maybe a Lynx2 in a couple of years
I had a Hobie PA 14' and a Solo Skiff and now the Hobie Lynx and I agree I love my Lynx because everything is easier to handle and it maneuver s better and I feel like handles rougher conditions because the water instantly rolls off
I am interested in making one like that..just can’t figure out what is he using to move the paddle this way…if you can please give us the materials you used I would appreciate it very much..thanks
@@johnrugani2382 The decking material would work, but it is a monster to remove. I have seen videos of people using scrappers to get that stuff off. This cheap foam sticks to the kayak well and is fairly simple to remove.
I finally got it on the water to test the foam. It works great. I need to take it back a few more inches though to hit the water line. Also, I need to tape over all the foam so it won't get damaged easily.
Skin is very fragile. The protection is a good idea to prevent any punctures. With that said it is foam inside so you won't have any issues if you do get a puncture (won't sink).
I have beat the hell out of my Lynx for two seasons now. I have no hull protection and fish a very shallow river that has fresh water clam shells and rocks not one bad scratch or puncture. I drag it all over the place. Yes there is rash but nothing critical. I think these get a bad rap for being fragile it has not been the case for me. Nice upgrades!
Thanks A.J. That is good to hear that the hull holds up to clam shells. I have damaged some of my past roto-molded kayaks running over oyster beds. It is probably overkill on my lynx, but I just haven't heard much feedback how the lynx holds up to abuse from oysters. Your feedback helps, thanks again.
Great build! I have the same lynx, you really do need all that protection on the hull. The Asa is super fragile. What type of motor do you use and where do you mount it. i use a super light water snake motor. 18 lb, thrust it only weighs 4 lbs. I run it on a 20 ah lithium through a PWM lasts 8+ hours. i have mounts for the motor bow or stern. Thanks for sharing!!!!
I have the Bixpy which drops into the pedal drive opening. I had to use a file to shave off a few millimeters to make to fit easily, but it works. The bixpy is loud but it helps get me a few miles in a hurry without peddling. You can't use it like you would a trolling motor because of it's loudness but it is still a great way to cover a lot of water.
@@SuperFatloser I waiting on my replacement hull from hobie, my lynx cracked in the scupper holes. It’s been a long drawn out fight To get them to cover this and i lost 1/2 the fishing season. But i am getting a replacement. Anyway, I’m using an 18 lb. Thrust water snake trolling motor with a 20 AH lithium battery. I made a PWM for speed & fwd/rev, mounted on the back just off to one side so you can still use the rudder if you want. You can also steer with the motor. I’ll have to send you a picture once i get the new hull. This system works great with the Lynx. Top speed is only 3.5mph though. The thing I like the best is how slow and quiet you can go. great for working shoreline structures
I don't know what you mean by soft, the Lynx seems to me to be very rigid. Also, it light and very stable. I'm 63 years old and the only thing which matters to me is getting on and off the water comfortably and being able to stand while I am fishing. If I have to sit for five or six hours, my butt is hurtin'.
Hey this is a super idea! I am looking for ways to retro fit and "pedal power" my kayak. I was looking in to making a oscillating fin ( something like a flexible rudder to simulate a fish tail) but this looks much more simple! Also I love seeing the Bending Branches paddle, I actually build their wooden ones. Could you post a video of the whole mechanism you built? -Thanks
@@rayalex9294 My guess would be a piece of a bicycle frame. the part that connects the frame and the handlebars for the left/right motion. Then you would need a swivel hinge connected to this part and the paddle. Not a very efficient method of propulsion. I would look at some of the Asian videos of people making pedal drives and small boat propulsion systems. There are a lot of them if you search.
Nice job on the upgrade. Who makes the stabilizing bar and the skeg assemblies? Are they off of an outback or some other brand kayak? I have a 2013 PA12 and its nickname is the "drunk monkey" since it cant track straight to save its life. I am interested in doing something similar.
I'm crazy for kayaking and go out regularly with a plastic hand l made to use for the missing arm, but still its hard to use more than a normal hand. It will be good for me and others in my condition to make something to use with our feet. I will try to see how it is but if you can provide some more detail I will be obliged
*This was one if the Best purchases I ever made!! Great productつつ>**share4.photo/PKayak?51 ** great price, It is for one person, but if the moment is right, and you get spontaneous and get lucky, it does accommodate two!!! Great fun....Great memories on the lake !!! :)*
*This one is still in the box waiting for next summer☛>**share4.photo/PKayak?Dめ** However, I had this brand, and one that looks like this, and looooved it! This will be my third one! They haven't worn out, I just don't like storing them over winter.*
I saw your older videos of this, and I am hoping to see a build video! This is absolutely amazing! I have a brother that has been injured during his time in afganistan and I was hoping you could give me info on how to build this so he can fish with me again like old times. Please please give me any info that would help. Thank you so much and again, that is an amazing idea!
Any plans on making a detail vid of how it's made or are you saving that as you plan to sell these or the plans? Really neat device. I assume it does require drilling holes in your paddle, yes? Do you find your feet get stuck in the foot stirrups? Just wondering in case of tipping the boat over. Thanks!