The front pins need to be pushed out from the front of the vehicle to the rear very carefully, the rear pins need to be pushed out from the rear of the car to the front very carefully while holding the mounts! as you start pushing them out, you will notice the pen has a textured in on it!
@@walthersonr.c.3360 Hi, thanks for the reply. What tool do I use to remove the pins? If possible would you be able to make a video on how to remove the pens and install the shocks?
Hello , the only place I have been able to run it has been on a tennis court, it has to much power for the house, as for the gears , I had to apply grease 4 times while breaking it in at high speed I use two battery packs! 0:04
I just got my RX-7. These cars are great. I started the hobby years ago at 1/10 scale, but that got really expensive. These cars fit the price and customizing I need
Hello , Johnny great that your in the hobby, I have been in the hobby since around 1983/84. I have RC cars from 1/64 to 1/8 but injoy your Rx7 when it comes to upgrading it just be careful who you order from and what you order and if you have the capability, take pictures of what you’re ordering online as you go along and thank you for viewing my channel!
Hello, I am using a 3800KV motor with a 18a esc from AliExpress it was about $22 dollars, I am trying work on putting in links to things, please be patient!
Hello, I love the Rx7 , AE86 and the one I had to modify, the gray one, they all run and work very well and it seems like the newer the model the better it is, the passenger right rear suspension on all of the kits is a little goofy Meaning, you’re gonna have to play around and adjust it to get it to work properly but for the amount that they’re charging, you can’t beat it. thank you for viewing my channel and I will try to air a few more videos soon.!
Hello I bought them from AliExpress under LDR/C parts. You’re gonna have to look through the sites with the parts be careful I paid five dollars and change +3 to 4 dollars shipping. You’re going to need to put a lot of grease and break them in before running the gearbox in the car!
A lot of the videos that I have viewed did not answer all of my questions so I started making a few videos and answering all the questions sent to me ! I’ve been building RC vehicles since 1984!
Thank you for letting us know the dimentions of the ball bearings. I hope we get to see and hear the metal gears and dif in action. I hope we get to see your car in action soon.
Hello, thank you for your comments . I trying to get some video for everyone, the brushless system is to powerful for the Drift tires in my house, and the rubber tires are great for outdoors !
Hello, and thank you for viewing, the motor is a basic 1/28 brushless that will fit a WLToy 989as will as other 1/28 drift cars, but I got it from AliExpress with the esc it was $20.00
Hello and I am sorry I did add the link , we know how difficult it is to deal with some of these stores online. If you go onto AliExpress, sky maker, official site, they’re showing the vehicle with a lot of different prices. I am trying to post this for you give me a moment please.
Hello and thank you for viewing. I bought the vehicle from AliExpress from a site called sky maker, official store, if you don’t have an account with AliExpress, it’s going to be more expensive the page I went to on my account doesn’t look like the homepage at all.
Can you show how to change the wheels. Im having trouble swapping out the front. It feels like its stuck on & ill break it trying to take it off. I managed to slide the rear wheels off just fine. Can you show how its done with out brute force almost breaking it. Please. Thanks.
Hello and thank you for viewing, unfortunately if your vehicle has the plastic hubs in the front, they are hard to remove , you can try to sanding lightly with a 1000 grit sandpaper on each side, or upgrading to the metal hubs they are about 3 / 4 dollars on AliExpress
@@walthersonr.c.3360 I finally managed to change them out. By taking off the body and the suspension arm links and leaving the bottom ball joint on to remove the wheels. Yeah they are plastic hex. Thanks. Could do with a metal upgrade.
I'm loving you reviews and tutorials man keep them coming. I've been messing around with The LD RC series and you videos help shed a light to some of the unanswered questions I've been wondering about. Thanks again man love the videos. Definitely plan of get a rock crawler next I'll be looking at your videos in the future brother 💪
To have better suspension response remove the kower control arm limiters inserts and fender liners on the front. Those both limit the travel of the suspension and will bind up the front wheels at angle
Thank you for viewing my video, work with the suspension to help loosen it up add some grease or oil to make it a lot smoother Amazon sells WL toys 959 shocks that will fit on that model!
Big tip, trim a single coil off the front of the shocks. Itll handle alot better. Also after you put in a Aftermarket gyro, if you havent already, slap in a surpass 9g steering servo. Its plug n play and is a ton smoother.
Hello, and thank you, there are 3 versions for this car / rtr , the ae86 version looks like the oldest. I ordered a AE 86 with gyro and the rtr I received was version (1 ) the company told me 2 weeks ago that it would be taking care of, I am waiting to see!
Hello, please check all 4 corners of the suspension and add oil to the ball ends and pivot points to insure they can move freely! As for the rubbing , yes heating up the wheel well off of the car will help. Check the front hubs hair or lint before running your car !
There are 3 versions , the ae86 are a lot different then the Rx7 and NSZ , be careful ordering because I ordered a ae86 with a gyro and they sent me version 1 , I contacted the company 2 weeks ago and they said that they would make things write!