I’m here on RU-vid to create some content that will INSPIRE you to give things a go, REDUCE waste from your BROKEN things around the house, HELP you fix something for yourself or just provide some joy for your day!
Life is not just about the accumulation of possessions and things. However, there is a real sense of achievement in working through something for yourself or learning a new skill. This holds more value than simply just spending money on the next big thing.
I’m no expert but I believe most people have the ability to do things well beyond their initial expectations!
All it takes is a little bit of ENTHUSIASM!
Don’t get me wrong, some things are definitely best left to the professionals and I encourage those who don’t feel confident to seek professional advice first.
Feel free to give me some content ideas.
If you like what you see please subscribe and like the videos to help motivate me to make more.
Hey guys, you can get a new motor here from AliExpress ⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️ s.click.aliexpress.com/e/_mtMQJS4 ⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️⬆️ Plus use the below codes for your exclusive discount! 💰$5 OFF For orders over $50 Code: 【IFPMP9R】 💰$10 OFF For orders over $100 Code: 【IFPIQQS】 💰$20 OFF For orders over $200 Code: 【IFPR2QZ】 07/02/2024 00:00 PT ~ 10/01/2024 00:00 PT
If you haven’t done so already, please subscribe to my CHANNEL as it really helps me build this thing! Plus, you will be up to date with any new content that I upload 😁
LINK - ⬇️ ⬇️⬇️⬇️ - LINK a.aliexpress.com/_mty2frS $4 OFF For orders over $25 Code: 【IFPPACU】 $8 OFF For orders over $50 Code: 【IFPB7ZV】 $20 OFF For orders over $200 Code: 【IFPEKDV】 05/23/2024 00:00 PT ~ 08/23/2024 00:00 PT
Hi Colin! I’m pumped about this feedback! Im glad that it was helpful to you. If you haven’t done so already it would be amazing if you can subscribe to my channel for more helpful videos and help me grow the channel!
Hey mate, I do actually own an Electrolux and yes I realise it’s probably more of a challenge.. good thing I like a challenge 😜. Will make a video of that also if and when it blocks up. Thanks for watching! I really appreciate it.
Sorry to hear that mate. what I would potentially try if this happened to me is. - check to see if it gives you an error message after going backwards. For example. “Please clean the drop sensor” and if it does then that will help point out what the problem is. - I suspect that either something is still unplugged or a wire is pinched/damaged. Some wires run very close to the housing joints, so I would carefully open it again and look to see if any wires are kinked or jammed between parts. Really hope you can get this sorted! Where in the world are you located?
Yeah it says about the drop sensor. I pulled most of it apart except the wheels. I’ll dig a bit further tonight and hopefully get it working again! And from Aus 🤙🏻🇦🇺
It’s Just A Matter of Changing Parts The Structural integrity & Chassis is Still Good So You Do One Part At At Time And You’ll Get There Brother Trust Me This is My Bread & Butter… 🫡💯🇳🇿🤙
Thank you, yes lots of parts to replace! But plan to work through it one by one. One of the rails is badly damaged so will need a structural repair to that. Where in the world are you located?
Racing you at double speed upon reassembly seemed unfair... But approaching the finish line you got paused and I won 😂... Thanks for the help, much appreciated 👍
Haha that’s so good mate! I’m really stoked that my fairly average video has helped so many people already! I thought I better speed it up slightly so it didn’t drag out too long. Plus I’d really like if you would subscribe and help me build this thing up. Thank you
No problem! Glad it was helpful to you. Please feel free to watch some of my other videos and subscribe to help me create some more helpful videos. Thank you
The vehicle battery should be completely disconnected for at least 10 minutes before attempting to touch any srs / airbag components. These are dangerous devices which may seriously harm and shouldn’t be handled by anyone who is not competent to do so.
Thank you very much! I'm pretty much amateur in things like these, but following your video, I was able to disassemble the little sucker. And what's even better, assemble it back after replacing the motor and it still worked :) Also, my little gear was almost OK, but the gearbox itself was full of hair...
Hey there! I love this! Glad that you were able to give it a go and get it done. I’m already looking for what else I can make some videos on to help people fix things and reduce waste from broken but repairable items
Hey mate, thanks for the comment! I think it depends on the severity of the accident, but was told by bmw that I may have to replace the srs ecu, but turns out I didn’t need to. I replaced the drivers and passenger airbag, the drivers seat belt (both upper and lower) as it had activated, the drivers curtain airbag and then reset. Luckily the sensor in the foam bumper was ok and the bonnet hinges didn’t activate. Let me know if you need anything specific and I see if I can make a video out of the content I have saved
Hey Andrew, do you know how can I figure out which motor needs to be replaced? Mine is making a loud nice when it starts as if bearings are broken or something but can't make out if its main motor or side brush motors. Also thanks for the full video on disassembly!
Hey mate, not too sure, but you could try take out the main brush first and run it to see if the sound is less and then if it is, will likely be the problem. Feel free to subscribe and help motivate me to make more videos of this kind of stuff. I appreciate your comments
Hi, I got the spare part from AliExpress. The Deebot is made in china so figured this would be a good source and it’s still working 100% since the install.
Did exactly as you showed. Reassembled and now I get a 406 error indicating the Wi-Fi isn’t working. I think I might have damaged the ribbon putting it back together. Not sure.
Oh no, sorry to hear that. It’s worked fine for me each time I have done this. First thing I would try is a restart and try re-pair it. If that doesn’t work, you may have to carefully open it back up and make sure everything is connected properly and that no wires were pinched between components when putting it back together.
I restarted multiple times. I’m not sure what happened. I hate those little ribbon serial cables that connect auxiliary boards. They never work again after I disconnect and reconnect them. Thanks for the video, man, I really appreciate it. But this one is going in the trash and I’m getting another iRobot. I have two 800 series that are like tanks. Both still run. Easily fixed when they break. Should have stuck with iRobot and now I regret buying this Chinese POS.
I just disassembled it again today three times, unplugging and replugging in that Molex ribbon connector to the Wi-Fi card. Third time’s a charm! It works!
The same thing happened to my ECOVACS N8 Pro+ after two years of use. The tassels on a rug killed it. I had tried to block the area off in the map, but the damned thing forgets the layout and constantly has to remap the whole house… and when it does it eats the tassels, which eventually killed the gear on the drive motor.
Yes its extremely annoying how easily the gear stripped, we have two of these and both have now done it.. However, ours was when the main brush gobbled up the kids shoelaces and string from their toy train. Hopefully you found this video helpful as the parts are cheap and the repair is easy enough. Just a bit of a mission to get to the motor itself. Please like and subscribe if you found value, I have more content ideas up my sleeve so would appreciate the following
