My name is Alex and I have spent over 30 years in the vending machine industry. Spending the majority of that time repairing and supporting both snack and drink vending machines. I have gained specific knowledge in regards to supporting vending machine operators and their vending equipment. The goal of Vending Machine Support is to share that knowledge to both new and old vending machine operators alike.
hi. First I want to say I really appreciate what you post. you are an inspiration to us all. I am new to the vending machine business and half of my vending machines are outside. I have Dixie Narco 501E, Royal 660 and Royal 550. how cold does it have to be on the outside of the vending machine before cans are destroyed in the vending machine. the internal fan generates some heat and I always close the door on the machine properly.
Hi VMS, your videos have been extremely helpful! can you do a how-to-load video on the DN720p HVV machines and the Older Seaga combo machines model GO-380? I recently bought these and will be placing them at the location next week. Everything is working and they're in good condition. Thanks!
I have the 721 and it looks like it will dispense an additional 12 oz can after the 4th cycle (once the next row of cans is reloaded) The depth is set to 4 and the tabs on the bottom are set all the way forward (towards the door) Not all rows do this. They are all set up the same way. Any ideas?
Thank you. But my problem isn’t the lock plug, it’s when I turn the t handle counter clockwise ( I’ve turned it many times) the door won’t unlock. I never had this issue before
Hello I have a D/N 501e with a mars TRC 6000 coin mec, it only works part time,the bill changer works all of time. Do you have idea what I can do? Thanks
When I get to the Diagnostic screen and hold in on the top button, it jumps back and forth from DIAG to LOC and won't go into another menu. Does this mean that I'm locked out of that menu?
Hi Alex - Any advice on a 501E that accepts 1 dollar and then stops accepting bills after that? I have cleaned the bill validator and have full change. Very frustrating.
We hard our 501 for almost 10 years and until just today wanting to change a coke bottle to coke cans in a narrow slot. I never knew how to set the timing it was always trial and error 😂. Thank you so much for this video!!