Тёмный
THE AUDIO REVIEW GUY
THE AUDIO REVIEW GUY
THE AUDIO REVIEW GUY
Подписаться
EXPERIENCED AUDIO ENGINEER REVIEWING AUDIO PRODUCTS THAT I WILL BE PURCHASING AND ALSO AUDIO PRODUCTS I'VE PURCHASED THROUGH OUT THE YEARS TO HELP YOU GET A BETTER INSIGHT AND MAKE BETTER DECISIONS ON PRODUCTS YOU MIGHT BE INTERESTED IN PURCHASING.
Комментарии
@nicolaslefebvre-cloutier1312
@nicolaslefebvre-cloutier1312 4 месяца назад
Don't buy from that compagny GotoTools...I had really bad customer service and the owner is a total asshole ! I was buying the GTZ47 Fet based on the pictures on his website and also the reviews online...what i received was not the same nice big mic body it was a smaller cheaper mic body...I was buying this mic only cause i could have build a U47 clone in the mic body so i lost 250$CA for a cheap ass body mic with a cheap ass circuit rebranded from Temu ! Go buy somewhere else, you don't want to make bussiness with that guy !
@cocosloan3748
@cocosloan3748 10 месяцев назад
Still no review ?
@phellylandveld9548
@phellylandveld9548 Год назад
Aye fam we need that follow up mic test comparison 🙌🏿
@kenzorwings
@kenzorwings Год назад
A test how they sounds when?
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
I’ll try to make a review on how they sound next week. I did make a comparison against my AKG 414 and sad to say the GTZs won. Can’t believe they sounded better than my $1,200 microphone.
@kenzorwings
@kenzorwings Год назад
@@theaudioreviewguy4380 After you do i will decide if i put some money on the card to order them. Also i have to pay for them 60 $ shipping and total will be with discount 234 from 200$. But from us to europe(romania) =))))))))))))
@jayjayrecordz
@jayjayrecordz 7 месяцев назад
@@theaudioreviewguy4380so your telling me they’re legit? 👀 thinking of getting me some clones, $1200 is quite a lot for gear…
@ivankjt
@ivankjt Год назад
What materials are used for the body of the mic? Are they solid?
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
It’s not made out of any cheap material. The casing is all quality metal. All parts are made and assembled in America and is all hand soldered.
@UCS0608
@UCS0608 Год назад
I wouldn't call it a U87 clone, it only has a cardioid pattern. But if the sound is ok it's still a good deal. I have two Chinese TLM103's. I've compared them with my Neumann TLM103 and they actually sound "annoyingly"' good, especially given the fact that they cost me about €40,- each..... 😛
@ohboyohboyohboy5226
@ohboyohboyohboy5226 Год назад
where did u get it from?
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
They actually have the option to buy with the cardioid pattern for a bit more higher price. Even has an option to upgrade the capsule as well.
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
@@ohboyohboyohboy5226 gototoolz.com/
@unspeakable0235
@unspeakable0235 Год назад
Looking forward to the next video
@MarcoBandsTV
@MarcoBandsTV Год назад
How does it sound ? Like a Real TLM 103 I wanna but but don’t want a garbage mic
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
Well I finally tried them both and I’m embarrassed to say I put them both up against my AKG 414 and they both put my AKG to shame. They both sound nice and open with lots of body. Nice low ends and smooth highs. The 103 actually sounded alittle better than the U87. Hope this helps. I’ll be making another video testing them soon
@MarcoBandsTV
@MarcoBandsTV Год назад
@@theaudioreviewguy4380 i have a rode nt1 a which interface you ranned it thru? Do you hear any background noise ?
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
@@MarcoBandsTV No. They were nice and quiet. Again comparing to my AKG. The noise was quiet and both were very smooth sounding. Supposedly they solder all the components by hand and all the components are bought here in the USA 🇺🇸.
@theaudioreviewguy4380
@theaudioreviewguy4380 Год назад
@@MarcoBandsTV I ran it it through my Universal Audio Apollo 16X
@MarcoBandsTV
@MarcoBandsTV Год назад
@@theaudioreviewguy4380 anything will sound good thru an Apollo
@deandresmith5761
@deandresmith5761 Год назад
How 339 reviews and only 2 thumbs up.. c'mon y'all it wouldn't hurt
@rodrigoacuna6366
@rodrigoacuna6366 Год назад
Saludos, me encantaría la revisión del GTZ 103 ojalá lo puedas hacer pronto muchas gracias por compartir y suerte!!!