Hi, Are you still using your vehicle? Are you satisfied with it? I'm considering buying the 2009 1.3 version, but I have some concerns. Your experiences would be really helpful in making my decision. Do you think it's a good idea to buy this model? Thank you.
@@brk.34 Hi, I still have my mazda 2 from 2010. Still doing great. Mine is 2010 sport 1.5 so good so far. Exept that mine is quite petrol consuming. Probably bcause it's a 1.5 it has 42L and does 300 miles, witch from my point of view is not a lot.
Thanks for the vid. Very helpful when I was changing the windscreen washer pump. I have to say that I had to put it on the ramps to get the bumper back on, though - I just couldn't see under the front to line up the screws.
First of all check if you realy do have rear speakers, take a torch and try to check through the holes. From my knowledge, the options are: 1) they are turned off on your radio settings 2) they are broken but both of them to be broken looks very weird to me so i dont think so 3) they are not wired 4) they were wired, but after some time and after many potholes they got unpluged. what i would do is: 1) check the radio settings, maybe do a factory reset and if it doesnt work then it's not your radio problem. 2) i would check if there are wires witch go to the rear, your should have 2 wires going to left and 2 to the right, if you only find 1 going to left and 1 going to right then there are no wires going to the rear speakers. 3) if you do find 4 wires then you are unlucky because you will have to remove all the panels to check the rear speakers. if your car has 5 doors then you are lucky because it will be easier, if you have 3 doos then my friend you will swear a lot of gods XD I have 3 doors and I had to remove almost everything to access the rear speakers. Good luck.
Buongiorno, visto che sei recente, volevo chiedere come hai fatto ad entrare nel sito su port mapping perché da me non riesco a vedere ne configurare. Neanche con cellulare. Grazie
Ohhhh, ok, very tight! Thanks for the reply, *MUCH* appreciated 👍🙂 Did you fit new rear speakers also? Do you have any idea of the depth there? I'm thinking about upgrading my mother's car speakers over 🎄 break, you've helped make it a lot easier, only have to remove door skins once now
@@minus3dbintheteens60 on the rear doors ( my mazda 2 has 3 doors wich is F... Annoying to change the rear speekers cause u have to remove everything, hope you have 5 doors) i put Bass Face SPL6M.2 800W 6.5 inch Mid-Bass Car Speaker Single Wich are 67mm depth, but i cant remember if on that location there were more space left. I do remember for the front speakers but cant for the back.
@@anthonycapon1882 maybe I’m just weak lol Idk I ended up pressing down on the hook part to get it out One of the doors had it backwards though so I ended up just unscrewing some plate it was on.
Good afternoon and sorry for my English, my Mazda 2 has the seat belt warning light on top of the radio, is there a problem if I leave that light off? Thank you
Hello Pedro, i am not sure to understand your question. 1) wich year is your car? 2) on the top of the radio it should be the red triangle called warnings, which is important and should not be removed or disconnected. If on the top of the radio you really have the seat belt warning then it could be disconnected if that is not a problem for you. By the way, under each seat of the car ( front seat) there are 2 cables, if you unplug them, you won't have the seat alarm anymore (like I did =)
@@anthonycapon1882 Exact!! I have the warning button and a seat belt light, I understand that I can easily disconnect that seat belt light from the frame and that does not affect the operation of the airbag, right? I can even put a small LED to replace that light, right? But I am reassured knowing that it does not affect operation and that I can turn off that light. My car is from 2008. I thank you very much for answering me and I apologize once again for my English, I hope you have understood me. Cheers
Man, that’s a great color you got there!!!!! I’m in the US, we did get a few cool colors….. Aquatic Blue Mica and the color I call Frog Green (though I don’t think that’s the name Mazda used) but that coppery orange color is awesome!!!! I wish we would’ve gotten that, and the projector headlights. Beautiful car!
Ottimo video: seguo ogni step ma alla fine quando mi collego al router CONTINUO A NON VEDERE LHARD DISK CHE VIENE CORRETTAMENTE RILEVATO DAL FASTGATE!! Heeeeeeelppppppp
@@anthonycapon1882 sono le 17:00 e sto provando a collegare un hd esterno da 1tb dalle 8 di stamattina.... ho capito il problema solo grazie a questo commento
@@SuperAlguero Ciao caro, felice di aver aiutato! ho riletto il mio commento e c era scritto 5gb, ho modificato con 500 chiaramente. Non so quale sia il limite dopo il quale non rileva piu gli hard disk però sara sicuramente quello il tuo problema. Magari su internet trovi maggiori info.
Cheers for that, helped me a ton. For anyone attempting that: Putting the mirror back in requires more force than you might feel comfortable putting on the mirror. It needs to clip back in on three places: The main, large swivel point, and the two motors. The motors might get pushed back (since they are weaker than the force needed to clip the mirror on them), so you need to first move them all the way back with the controls (For the left side mirror: left-most and down; for the right side mirror: right-most and down), then push the mirror on them.
Hey Antony my mirror is constantly ghosting, like trying to move on its own life it's fuKin possessed, is that the motor or a relay or wha? Tanks buddy!
By ghosting you mean moving on it's own as if you were pressing the switch? I am no expert my guess is maybe the switch/controller (the arrows command). Like a malfunction or some kind of short-circuit from the controller. I don't think it's the motor, the motor receive input from the "arrows switch" what you can try for free is to unplug it and see if it keep moving. If it doesn't then here we go. Keep me updated.
We see you take the mirror off and the plastic cover off and then you put it back together. But what was the fix? Sorry, was it just that taking it apart fixed it? Thanks for the video. Much appreciated.
Hi, I didn't have to fix anything in particular, on that occasion I had to open the mirror to put a wire somewhere and I thought that I could share the knowledge on how to open the mirror in case someone has to do it for repair or anything else.
Guida seguita e "samba" (Seagate da 5T) rilevato MA: 1. La cartella mi appare vuota, nonostante ci siano tutti i file pre-installati da Seagate 2. Non posso creare, spostare, modificare alcun file perché "Per eseguire l'operazione è necessaria l'autorizzazione"
Prova con una chiavetta usb. Se funziona allora il tuo problema risulterà essere l hard disk. Forse troppo capiente, non ricordo se c'è un massimo rilevabile dal modem, dovresti cercare questa info.
@@anthonycapon1882 a quanto pare il problema è la dimensione dell'hard disk, perché con una chiavetta usb "in qualche modo" sono riuscito a fargliela leggere...non me la rileva nella rete ma quando aggiunto la nuova posizione con ip la legge
Salve, no, è molto economico. Tipo dai 5ai10€ al metro quadro. Io l ho usato per aumentare l isolamento delle vecchie finestre. L unica cosa è lo sbatti di tagliarlo. Se non è pratica, meglio comprarlo su misura.
Check the link above, the headlamp is for mazda 3, but is almost the same as mine in the video. You have low h7 and high hb3. These headlamp are extremely rare for mazda 2. I spent hours to find them on Internet. Also expensive xd
