This channel is specifically for helping our customers! With a bunch of informational videos to help you solve problems that you may have with the products we sell here at horizon hobby.
Can I use a block in left or right side of the car? Or are there differences between the left and right blocks? Only differences I could find is a small plastic notch that prevents steering plate sit correctly. But that plastic notch is easy to cut off, and after that steering plate seats nicely.
My ESC seems not to work. It doesn't turn off Do you know what should I check? Every time I set the battery the motor starts to throttle up and if I trie to turn the ESC off it keeps throttling. Please, help
I have bound and calibrated with AVC in my limitless V2 as per the instructions - word for word, full right pause then full left and AVC was steering in towards a skid so I rebound this time full left then full right and it still steers in towards the skid. Other than deactivate the AVC which defeats the object of buying AVC RX TX for the limitless what can I do to get it to steer out of a skid? Using my DX5c. Sr6110at receiver. Thank you in advance 🏎💨
Just bought Eflite Apprentice STS 1.5m. The manual QR code sent me to this video. This is not the plane I purchased. This has a wing consisting of one unit. My model has left and right wing which must be connected This is not an RTF. Too much assembly needed. Was looking for an item that you can remove from box and fly. Saw one video which had one in use. Wasn’t Eflite
But the larger prop required in the float kit does not fit the drive shaft of the carbon cub. Can you send me the part number for a large prop that does fit??
This is still my favorite crawler after all this time. Hands down. Love it. The looks and scale details are fantastic. Performance is amazing. If the price was a bit lower and it had selectable lockers, it would be the unbeatable total package - I’d probably own two or three more of them. 🤣 👍✌️
if you don't have a bind plug use any tool to touch the two outer pins on row that says bind and just touch the pins, i used a pair of needle nose pliers so that they are connected and turn on the car and it should bind without needed a plug
hello me and my buddy recently got a rbx10 ryft from spektrum with a firma 130 but it dosn't seen to be picking up the brakeing could anyone give us some advise
I love my TLR Tuned Typon, however does anyone why at 100% throttle trim the car’s throttle will get stuck open? Happens everytime I try to do a pull down the road and I can’t stop, scares the crap out of me hahaha
Nice vid. I'm doing this once my parts arrive in the mail. It's nice to see a big company happy to help with mods unlike, say, Traxxas, who want you to run their vehicles in one specific way: the way they tell you to run.
This literally doesn’t explain the levels at all. It shows the number and a random airplane flying. Not helpful whatsoever. It would be great to explain the specific differences between them.
What are the channel assignments? I have AETR good to go ... Trying to get AS3x and Safe setup correctly ... I am using a non-spektrum transmitter as I dropped my DX6 and it is now just a paperweight. Any assistance is greatly appreciated
When assembling the tail, I cannot screw it to the fuselage. The screws are not long enough to reach to the tail's part. it doesn't even touch it. And I have no gaps, everything is snug and tight
when connecting the wing wires to the ports in the fuselage, where do those ports go to? do they just have wires going out of them and into the receiver? why I ask this is because I want to change out the receiver sometime soon.
Guys my mini aeroscout I just got the motor won't work. Could I get sent a new one I'm just a kid I don't have money please. I don't know why engine won't work