Thaaanx 👍🏻

There was hope... but no patience to make it fly - so I replaced the frame 🤣 Sorry guys

absolutely not! 🤣 it’s doesn't fly - in this case the frame not stiff enough and after the start the motors stopped. Don’t do it. i have changed my frame for a new one 🤷‍♂️

lmaoo

Yeah, but it doesn’t fly 🤣

​. Doesn't.?

@@robvandermolen9537🤷‍♂️

Thank you 🙏 I did my best

Honestly I’m not sure, but flywoo works perfect

@WIL_FPV thanks!

@@emanuelebosco594 if u wanna i can share photo how is it looks like on my own drone - just write me + in the insta

Thank you very much for your comment 🙏 I hope you found it useful ❤️

I completely agree with You - 5" still the most favorite drones, but this little one sometimes helps out a lot

maybe you're right, maybe I'm just lucky. But the next one, I definitely want something else

he-he, no, of course not)) But gopro replaced it for a new one BTW, Are you satisfied with your meteor 65? is it 1 or 2s?

@@WIL_FPV The meteor 65 Pro is a tiny beast. I love it, its 1s and really powerful for its size in my opinion.

@@FPVEmperor I feel u. I do love tiny whoops 🫶

There is a version with a built-in ELRS and a version with extra СRSF. In my case, its a TBS receiver

THANK YOU! After one year still absolutely great drone

As I said in video, it doesn’t sub 250 anymore. As u said only with 380 does

Of course: quadmula f5 split tmotor esc P60A V2, fc Velox Cine F7, tmotor F60 1750kv CRSF O3UNIT vifly buzzer

Thanks Will! ❤

The Rotor Village - canada internet store. It is available on official store as well

Absolutelly, this flight time is possible because of this battery and because I was just cruising. If you fly as a normal freestyle (It has absolutelly typical 2207 motors), of course this time will be less, much less. But the idea this drone was to make it more versatile Thx for asking

@@WIL_FPV amazing 😍 thx for your answer 😎🤟

@zazaFPV u ar always wellcome. Ill try to fly today more dynamic just for compear, but especially this battery more for longrange 🙌

Thanks for ur comment. Maybe one day we fly together, maybe we will following (I have a cinebot 30), that would be great. Oh yeah, will see in two days

Thanks for your feedback, I'm glad you found this video useful for you, because I'm doing it for you. it is actually very important - ur feedback, ur opinion - thank u and appreciate it

Thanx, still one of my favorite drone - love it

@@WIL_FPV That's the next drone I'm getting and it's all because of your honest review. Thanks for these videos, they are so helpful.

@FPVEmperor I hope you will love it as much as I do. I would be grateful if you follow the link in the description - it will help a lot for the statistics. Maybe we'll ask Beta FPV for something and will make give away 🙈

Thaaaanx. Yeahh, im also very impressed this time, but obviously its without camera :/

That’s right, however it is without the camera 🙃

What is the capacity of the battery? Install Li-ion 10 000 mAh batteries, the flight time will be around 2 hours.

Congratulations! I hope you will be happy with it, because I am. i have had geprc Cinelog 20 and this one - both of them so much fun 🎉

Thank you so much for your comment and I really appreciate it, it's nice to know that my video was helpful. Pavo20 is actually 3s drone, which makes it quite powerful with quite a light weight. If you remove the propguards, you might even be able to freestyle it, I think. If you have any questions and I can help, please feel free. ❤

@@WIL_FPV Thank you very much. After watching your channel, I wanted to own an FPV drone. thank you.

@@kkuni491 Maybe that would be a good decision. If you don't mind, check it out from the link in the description (it won't give me much, but it would be nice for the stats). The drone itself (with out o3unit) costs 100+ usd Also, I would advise you to look at google for these kind drones - they are currently discounted by $200 thaaaaank You

so, you buy a drone (look at the link in my description how is it looks like) and separately O3unit, install it, but its very simple - 4 bolts and a connector. Bind with the radio (CRSF in my case), well, thats it

@@WIL_FPV i did and will order 2 or 3 in my case so i can break it as i like 😂

Thank you 🙏

I fly stock pids, rates on this drone - all settings are stock, it has a great pretune out of the box - RTF

I'm not sure this is the best solution, it's very light. I mostly fly this drone where there is no possibility to fly a larger drone thank u for ur question, cool aquarium btw

I would advise you to always follow common sense, double check the rules and not believe everybody on the Internet

Of course, depending on the region, the rules differ - it's better to double check for your country, thank you

Thank you very much for ur comment

Thanks for your comment, appreciate it. You know, probably ur idea make sense. I didn’t try pavo pico, however I should say pavo 20 also very vulnerable to wind. but I’m ok with it. In silence days it works perfect. if u follow my link in the description it’s very help me. Thank you 🙏

thanks 🙏 I hope we will fly together

My opinion is that they are completely different drones, for different tasks, each with its own advantages. For me, five-inch drones are still my favorite, but they don't always work for some conditions

Hey 👋 could you contact with me through the Instagram pls? Thx

Thanks for your feedback, it helps a lot. Frankly, after a couple of months of active use it, I still noticed that with sharp or active movements/acts, propguards can be visible in the frame. In this case, you need to make a small cut video on post. Also, in this video, I didnt touch on the topic of the possibility of shooting vertical videos with this drone, which is possible. Yes, all settings (PIDs RATEs) are stock - it feels perfectly from the box, so I didn't change anything.

@@WIL_FPV Vertical video??? Is this an o3 thing or a BetaFPV thing? And do you see this in goggles or it just records that vertical slice??

​@@infinityphotorob with o3 unit it is possible to record 4:3 and on post production make 9:16 after stabilisation in gyroflow - vertical format

@@infinityphotorob Ill show u, write to me on Instagram in private message smth

Thank u 🙏 It was geprc 20, but I already sold it for Betafpv Pavo20. I have a video about it

Nooooo, obviously not

@@WIL_FPVokay thats what I thought just wanted to be sure😂

@@elkku51 The drone itself barely exceeds this limit 🫣

Air mode only

I have never had any of my drones with o3 unit overheat. do u have the same drone? Could you show me some pictures of it, in the instagram for example?

from my old Nirvana radio

Hi and thank you for your question. This is very interesting, because I came across this question and opinions were very different. I always fly in ACRO mode (indoor, outdoor dosent matter). In my opinion, when using ANGLE mode, the movements look a little strange, etc. Of course, if it is easier for you in this mode, then why not. But you can reduce the camera angle and then your flight will not be so fast

@@WIL_FPV I just acquired a cinelog 20, and I usually fly 5-inch drones, but I'm having trouble getting the hang of the cinelog indoors in acro mode. I'll keep practicing to see if I can achieve flying like you do. I would love to know how you find clients or what the whole process is like. Thanks to this video, I can have a basic guide on how to start with the business. Best regards!

@etxa15 I feel you, because I, too, have always flown only 5-inch drones. I got rid of my cinelog 20 for now because I always well with cinebot 30+naked 11. It helped me a lot with indoor flying skills with a small 1s drone, I have a video about it (MORE THAN a FPV DRONE 1s tiny whoop), it's NBD, but there are many other options for these types of drones Maybe it will help u too 🍷

@@WIL_FPV I'll watch the video right now. Thank you very much for your advice!

@@etxa15 thank for ur comments and feedback

Thank u, I hope it was useful. Honestly, I do not use any cases for my drones, max I could put in the beanie 💂

This is the best description of the situation. The main idea is to fly wisely

This is just an experimental drone, I was ready for anything ;D

@@WIL_FPV haha.

@divingfalconfpv4602 honestly, I already disassembled it. I want to build a new one, with higher quality materials. For what? I have no clue - but it is very fun 😜

@WIL_FPV I know I know building for no reason but to build. I have like quads that are basically the samething just cause I wanted to build 😆

@divingfalconfpv4602 💯