My channel is to educate, and also help mechanics who are finding difficulties or anybody who are having problems about his or her car finding difficult to solve them. This channel teaches and also advise car owners how to maintain their cars.
Ok please I will kindly do video about that for you ok thank you for bringing my attention to that and thank you for your request I will do for that for you👍
Nice informative video. You should also mention that different vehicles require different coolant fluid. And if you mix your own coolant from concentrate, be sure to only use distilled water as base. Never tap water.
Ok thank you very much I will do that also but this information also is for all the cars. You can use this procedure for all types of car if only the car is using cooling system. Thank you 👍
Please remove all the valve cover bolt using 10mm ball spanner after that then you lock the crankshaft pulley and then loose the crankshaft bolt. But if you don't have much experience about it please kindly send it to mechanic to do it for you. Thank you
Thank you🙏 But is me work on that car do everything by myself please I hope you can see my hand and even I have hundred and six videos and my face is showing in the video. Please you can cross check my videos am truly mechanic which am in the field right now. Am about to post a new video please subscribe to my channel if you not do so, so that you can see my face Thank you 🙏🙏
So he has loosened all the injectors is tightening them one at a time and firing in-between. Does the engine fire up at a certain point ? Love to see the whole procedure.
Pressurize the fuel injection pump or at the fuel filter housing 30 lbs. of pressure . Crack the fuel line nuts at the fuel nozzles all at one time . Close them all when fuel appears . Start engine .
This one please what you will do is to get new engine because it affect both the engine block including pistons and engine head so you have to get complete engine and fix in the car Thank you
Yes the device name is PULLER which is used to pull the PULLEY, which is called CRANKSHAFT PULLEY. So please read my title again is "EASY WAY TO REMOVE STUCK PULLEY" Please the device name is PULLER but what the device is pulling is called PULLEY. Please thank you for your contribution 🙏
Thank you for the question bro 1.8 if it is new gearbox you need 6 or 7L but if it is old gearbox whrn you drain the fluid and you are replacing, that one you need 5L
How to check charcoal canister and purge valve of car my car has one charcoal canister one way valve and purge solenoid my car fuel tank is collapsed due to purge EVAP defect pl guide my car is Suzuki Mehran 800 cc Euro 2 EFI
Thank you very much. First of all please have you ever smile petrol inside your car or around your car when ever you are driving or the car is in idle, if yes then you need to change the charcoal canister and the purge valve and after that when ever you are filling you tank please don't fill the fuel tank to it breem and don't shake your car when ever you are filling the tank, it damage the charcoal canister faster than you think. Please the collapsing or the damaging of your thank because the vapor of the fuel need to pass through the pipes called vent then it goes into the charcoal canister then it pass through the purge valve then it goes into the engine back, now the purge valve and the charcoal canister has damage so it doesn't store the petrol vapor anymore so the vapor is within the tank so anytime you fill your tank the vapor increasing and it build pressure within the tank that is why it damaging your tank. Please to release that pressure kindly open the tank cover for sometime now but you need to have new charcoal canister and the purge valve then you are than. Thank you very much.
Nice one that can be true, but if air is in the system too can cause that and also if the fuel injection pump also can cause that if the pump is good. Thank you for your comment am appreciate that 👍👍
After loosing the nut then you let some one crank the car (engine) for you, then you can see that diesel is coming out from where the nut is loosed then you tight them back. If is air lock the problem will solve after that and the engine will start. Thank you very much for your question 🙏👍
