Do they have any adapters like pressure pads? 9m later hows the battery hold up under extreme use? Notice any "cheapness" after repeat use? Debating weather to try this or save for surefire Use a light layer of pat jelly or grease, no more corrosion.
Worst of bad ideas pointing a gun at someone just because someone is mad. Have 2 guns with me at all times, and I just ignore idiots. Now, if road rage turns into more than that, then have an answer for that too.
I hope you don't think I ment to use this light attached to the gun lolz 😆 😂 🤣 I just have the light mounted right now to make sure it can take recoil...1200 rounds and going strong so far. And I can shoot past 300 yards on a pitch black night with my LPVO and this LEP laser.
I also have both in 556 and a ddm4 in 300 blackout. Id take 2 tac 16 over a ddm4 no brainer. My DD's came with mil spec triggers. I dont think DD are obscenely over priced they are solid rifles. But the Armalite is just a smoking deal. I got the Armalite 9mm pdw also and its my favorite PCC. Also prefer the Radian over the grip n rip charging handle the Radian seems a hair better to me. Accuracy sub moa out of both rifles at 100.
I recently got two new PWS rifles…a MK 116, and a MK 111…223/7.62x39 respectively..I noticed a spot on both uppers in the cam pin cutout where the finish was worn off after only 20-30 rounds. I called PWS and they know about it and said it’s not a big deal 🤨. Ok. I just ordered two roller cams from POF and hope they work out fine. Good video. As far as I’ve heard these are drop in and don’t require any re staking.
For 30cal your bolt should be big enough to fit the roller cam pin in...without re staking the gas tube. I would guess. Just like on my 308 BCG...it's smaller bolt assemblies like 5.56 that you run into a problem with from my experience.
@charleslightner1825 you will eventually...I've broke a couple charging handles already..especially if you charge from one side or the other. Extra charging handle is a must to have in the gun bag. They also cost about 100 bucks each...and gas deflection charging handles for suppressors cost even more.. I love how solid the AK is in this aspect. And it's just feels so smooth to rack! The Zastava feels great. And I've racked a lot of AK's before I got my Zastava...the smooth rack was a bug reason why I chose this rifle myself.
@charleslightner1825 it's so nice to have the rail on the AK. I did have to upgrade my side mount rail to a midwest industry because the one that came with my Zastava was crooked. UTG makes the Zastava side mount, and that's really the only weakpoint of the rifle IMO. But if yours is not crooked then run it!
@@mobilegamersunite bro when I tell you seeing this rifle in person when I picked it up it was above my expectations. This thing looks and runs like unit literally you don’t have to modify anything but add your accessories that’s it. The folding stock was the icing on the cake 🙌🏾 I completely forgot about it when I took it home and to the range a guy at the range said Dam does that fold 😳 ohhh yea it does lol
I've seen them down to 500 already...so it good to know the price is coming down. I'm sure it will be a great lower to have tho. It's not like you made a bad choice...just a pricey one.
I just picked up the last 2 they had at my local tractor supply, they were marked down to $11.99 which I was more than happy to pay, but when the cashier rang them up they were discounted to $7.49 each, hell of a steal!!! Great song btw, NF IS THE SHIT!!!!!!
@@mobilegamersunite I know right, there's another tractor supply about 30 minutes from where I live, I'm gonna go see if they have them for the same price, but even at $15 I'd buy what they have, thank you for your review video, I wouldn't have thought to check there if I hadn't seen it!!
@user-lb4uz5xs9i I try to share killer deals on blades guns and ammo when I can find them. Make sure to sub so you have a chance to see them ...youtube is not exactly friendly to this kind of content so any support goes a long way. (I'm also not a guntuber shill, I'm never paid to say anything. Nor do I do this for any sort of profit)
I just picked up the last 2 they had at my local tractor supply, they were marked down to $11.99 which I was more than happy to pay, but when the cashier rang them up they were discounted to $7.49 each, hell of a steal!!!
Just bought a DD 14.5 Block II FSP complete upper for $1300. I didn't know this was a thing - official DD lowers. I've found them for ~550 on a few sites. I know that's on the high-end, but... If I decide to splurge on one, all said and done, I'm out less than $1900 total for a new complete DD M4A1 Block II FSP rifle with a surefire three-prong. The standard M4A1 currently sells for ~$2100. It's not a perfect deal, but it's something...
Thank you. It's exactly what she did. She didn't had to do that. I had to represent my school in a whole range of sports, but we had to do that. If i had a chice, i wouldn't do that. It's discrespectful. She wasted time of the professional dancers & organizers ... * For people it's life/job. It's not a joke. If she wasn't around, they would save hourse & would have more energy to compete & show their repertoire...
It's a simple sling that came off my Tokerav TAR12. If you are going sling shopping I suggest the ferro concept slingster. It's my go to for most applications because the quick adjust works amazing 👏
Definitely not cowitness, but it's a solid optic. In the future I'll look for a single plate. I didn't help that the HK match has very low iron sights. This is now my default red dot, its my go to for any future application. The price is good compared to other red dots with less features. I have some vids up showing this optic mounted in my armory Playlist
Trying to decide on either the AR10TAC14 or the 16. I have a PA10 with an 18” barrel for longer range shooting. If I got the 16” it’s almost like the same rifle. I love the idea of the 14” battle rifle but the brake is pinned and welded so no chance for a suppressor. What to do?
Well, you could pin&weld a suppressor on a 14 inch barrel. A lot of brands will give you an option for the P&W. Or a gunsmith might be able to break the weld and redo it with the can. Or find an adapter that clears the 16 inch threshold, so you can take the suppressor on and off. The TAC rifles are awesome 👌
@@mobilegamersunite thank you for the reply. Both of these rifles are on sale at PSA right now and I’m trying to hem up all my gun wants before this election and while prices are still relatively low. I want to go with that 14” version because it would be a badass battle rifle but would it be worth the effort over just getting the standard 16 inch? The 14” is $100 cheaper too. Tell me the right answer 😂
@SamplersAndThings well 16 inch gets you around 95%ish powder burn off and solid velocity. I doubt taking 2 inches off would be a big deal...especially if you already have 16inch and up barrels. Yeah get that 14 inch barrel! You can always change barrels later, and save 100 bucks right now. Btw very smart to stock up now b4 the election.
@@mobilegamersunite I slept on it and decided to purchase the AR10TAC14. After looking up how to remove a welded and pinned brake, it made sense to me to go that route and then add barrel device that will work with a suppressor just like you said. Thanks for the advice and I’m super pumped on this one. I’ll let you know how it turns out!
@@mobilegamersunite I have the zpap 92 with SLR rifleworks gas tube and handguard, it free floats the barrel and quality is beautiful I definitely recommend.
@TexasThunderChife yeah the handguards look great! Good to know we have more options. If I build another AK I'll probably go there for the rail for sure
Thanks bro nice work I went and ordered the SA version . . . . Here we have 7+1 SA not 5+1 I Ran 50 rounds non stop in it . . . Fired every shot however im not sure was it me or the gun cycling is funny unless you are doing with authority . . . .also if you cycle it a little to the side non level makes it fail to cycle
@nedalrabadi1 most of these guns get broke-in after a hundred rounds or so. When you take it apart for cleaning make sure to deburr any rough working surface with a high grit sand paper. At least that's what I do. I have not taken this shotgun apart for cleaning tho yet.
Glock has been doing this for awhile too. But even on my old Gen 3 Glock 17, the single spring did a great job getting over 20,000 rounds out of it until a piece of the plastic broke off. Even then, after I flipped it around, it still fired. And the new spring cost $5.
Yep, I've seen a couple of different spring designs in my pistol collection. The HK definitely is "around" DPM quality 👌 Good recoil reduction takes wear and tare off other components.
Learned a lot that day...I wish I could have stayed a bit longer to see how it all played out. We passed the cops on the way out. The cops took a long time to get there
@Mogget01 thanks! It's the best deal AR10 on the market right now I think. You can find them on sale for around 1200...that's almost 50% off. Daniel Defense never has good sales like that...this rifle also came with sights, and the best trigger I own straight out of the box! I'm team Armalite all the way because of this rifle.
The reason the dog is not doing anything is because this is father and son. I was told that the dog bit one of them the other day because the fight was so one-sided.
Polish up the breach face! Mine had the same issue and that fixed the problem. Use 2000 grit sand paper and take your time, get behind the extractor too if you can. Let me know how it works out for ya.
Any issues with this firearm?? I was looking at this and the Charles day honcho which is basically this with a spring assist pump.. I'm doing my research to see if this thing jams up,accurate and runs smoothly.. what type of shells are u using??
Mine pumps and cycles great. I used 3 inch shells and 2.5 inch slugs. The spring assist pump sounds good tho...that's where people jam up on the pump. Plz keep me posted and let me know what you decide and how it plays out. Hatsan also makes a bulltac bullpup shotgun that shoots very well for me.
You will! She's not limited. So she will be around. I'll be looking over her paid gear today as well. ➕️ 20% to debuff duration is the number 1 thing I would go for with her
Now think about how hard that would be to do in a fast fluid situation 🤔 people lose track of round count so fast in a situation like this. It would be easy to forget a few in the mag..
At first I was thinking this has been done in training before and it can be a valuable training lesson. Then you started playing the video and it’s pretty cringe. Yeeaahhh…. We did this in back in the day, but a little better organized. Fight the bag with bare hands for 30 seconds straight, actually tiring you out a little. At 30 seconds you hear “Weapon” as in a knife, gun etc. Then you draw and fire 2-3 rounds (which is all you have loaded in the mag) into the center of the bag and your slide locks back. Your off hand goes on your ear with your elbow up (like when boxing) or on your stomach to keep it out of the way of the muzzle (Real world may vary, like you said, but this was training). Now you strike the bag with the empty pistol a few times, roll off the bag and push it away with one of your feet; from there, reload laying down or stand and reload, reassess & reholster. There was also one where you stood on the line, firing at a steel target while someone punched you (wearing boxing gloves & not very hard lol) up & down your back. Good times 😂
I'm all for creative training 🙌 I curl 70lb kettle bells before i go to the range so I can shoot with dead arms. IMO I would only ever strike with a pistol if it was a decisive blow...and these are clearly not... Welcome to the channel and it's good to have ya here!
This is that saying "If you only have a hammer" quote. The only time I could think you'd be shooting someone from this angle is the person potentially having a stabbing instructment or you are John Wick, fighting to meet your duel at sunrise. And if you aren't John Wick, the hands would probably have been fight to control the instructment and one hand would have stay on the limb that as the instructment, while the other hand draws and shoots from retention.
