Built mine out of cinderblock. Makes it much easier when time to pump and clean the filter. Would recommend replacing screws with hex head bolts...something that won't hold water and rust/strip easily...
The gallon size of the blue condenser coil cleaner is easily the best bang for your buck if you rinse very well with a hose no damage or smell is caused to the costumer and it cleans extremely effectively, I do recommend a mask. It is no joke.
Hi, I also have an Ardco door. I overadjusted the door closer ratchet mechanism (the thing which goes on top of the rod) and I am unsure if I broke something. I recently took off the door and when I flipped the door upside down the rod was able to slide out from the channel. Do I need to buy a replacement part or if I pry the metal channel would I be able to reassemble the rod back into place? Thank you so much!
Hello, most likely you broke the torsion rod. You can buy a replacement kit with all of the pieces you need to rebuild the door. When you receive the new torsion rod you will have to cut it to the length that you want. If you gently take the aluminum off, you will be able to get to all of the parts inside the channel. When putting the aluminum back, I use either a pair of channel locks with tape wrapped around the jaws as not to scratch the door or a pair of channel locks for doing toilets and plumbing (no teethe) some guys can just snap it back into place, I need to use the channel locks. If you have the numbers off of the door, I believe the company is Dover Food Retail. Hope this helps. Thankyou
I should have cleaned it up and made a better ground, the rod wouldn't have stuck as much. I had refrigeration issues I had to get to. Thanks for watching
I find that it works better to lower the level. If it hits 99, there’s too much signal. Topping out under 99 then allows you to see a nuanced difference between proximate breakers, which dials the accuracy in.
Yes I know, you can buy these for around 250.00, Unfortunately, the company I work for had to buy it through Grainger, they charged us $350.00. It pays to shop around if you can.
Thank you, I try to keep the videos short. Hopefully someone can learn something from them. No reason to do a video that last a half an hour. Thank you
@@todaysrepairs long form are a good time if you can maintain the same quality as your short, james butler well and septic has great videos long and short, hes a great story teller
It maybe a York, it actually came out of an Octagon Main Unit for a supermarket. United Refrigeration could not match anything up. Octagon went out of business years ago. Thank you
