This channel is for everything that is not family related to keep that stuff seperate from The Wright Times channel. Everything from reviews, thought of the day, DIY, funny things, and everything else in between. Please subscribe, share and click the bell icon for notifications. Any support is greatly appreciated in building this channel. Thank you.
I agree with you I will pay but won't be ripped off thanks for the information nice to see there still decent film out there great driver and good price
I have not heard anything about that. As far as I know the current Range is the 20 volt xteam range. I wouldn't have thought any of the tools could run on 12V. Definitely not the power tools anyway
@@bayadere8308Just my understanding. I'm not claiming to be an expert so the utter nonsense comment is unnecessary. I'm sure there used to be 12 and 18v tools but moved to 18 and 20. Unless I am misunderstanding how battery voltages work with power tools. Like I say I'm no expert. Feel free to educate me in a polite manner if you wish so I can learn something. I am always open to new knowledge
@@wrightbytes Now you sound even more confused. However, here goes: there are many different voltages for power tools. The two most common are 12v. and 20v. Now, some manufacturers call their range 20v. which is the average maximum voltage at full charge with no load applied. But, other manufacturers call their range 18v. which is the nominal voltage. So, to all intents and ourposes, 18 and 20 are the same - it's just a marketing decision. Parkside are currently producing around four times more 20v. tools than 12v. If you think about it, why would Europe's best sellinhg DIY brand stop making batteries. In either range?
Thanks for the reply. I realise your commenting on an old photo but these days the mimo app seems to work absolutely fine with the few DJI devices that I have on it. Thanks for taking the time to comment anyway
Edward work for any camera that has a tripod mount on the bottom. Unfortunately I do not have a DSLR anymore to be able to try it with that kind of weight.
yours is the most helpful video by far - all the videos show a blue valve , like you mine does not have this . The boiler is only a year old and the key is missing . Can only assume the installers stuck it in their pocket by mistake. I have a key on its way via a well known online retail site. Only wee observation I have is that my boiler doesnt seem to have the little white square box next to where the key goes in - so fingers crossed its a simple insert and twist to refill function !
I actually found my key. It was a attached to something on the boiler but I'm trying to remember where. It may be clipped onto the inside of a flap or something. If I remember I'll send you a comment
Check underneath your boiler there may be a bottom tray that unclips. It may be quite stiff but I'm sure on the inside of that tray the key as attached to it
@@wrightbytes Many thanks for your responses - key 100% missing . BUT !!!!! - it turns out our boiler has an ' intelligent filling system' installed so it refills itself automatically. We had paid for this extra when the boiler was installed. It was a ' simple' case of going into the menus on the screen and selecting the auto refill option- its default setting is OFF so you have to tell it to refill itself incase there is a serious leak so it needs human intervention to make sure its ok to start repressurising which makes sense . Lo and behold thing was pressured up and running after about 5 mins. I thought about putting a video up as i can NOT find a video that tells me this and YOUR video was the only one that came close to helping me out. The giveaway was the fact that mine did not have the key insertion valve underneath like yours and definitely did not have the blue valve that every other video seemed to show. Thanks again
The cross-compatibility of batteries across brands and even within brands is deplorable. Anyway, I've found the best use for an impact driver is removing difficult screws. If you have a really tight-seated screw and the normal driver keeps slipping the bit and damaging the slot, the intermittent action of the impact driver seems to be more effective at turning it.
Thanks for the hand up, mate, but I had to go further and push both ends of the pressure hose inward first. It then detached from the pump and the handpiece easily without the pressure in the system. All credit goes to your tip however. 😃👌👌👌
Bought the Kärcher K-Mini, connected up, cleaned everything, came to disconnect everything and - oh. You have just saved me from attacking the clips with a "Dremel" Thank you so much 👍👍
Star man, thank you. Been fighting with the c clip for 10 minutes, figured there must be a solution.......heads up karcher, put some decent instructions in the box
It seems a lot of people have the same problem and you would have thought Karcher would have made it a bit more obvious. I'm glad the video was of some help for you