Hello and welcome to Out of Line Garage! We are an up & coming Motorsports channel from Florida's Space Coast! Join us as we attempt to build and race our projects, scavenge for parts, or go on all sorts of other automotive adventures! Fellow RU-vidrs, feel free to message us regarding collaboration videos! We love working with others to not only have a lot of fun but to make some great content.
You can purchase the same mods you see in the videos here: www.amazon.com/shop/outoflinegarage
Also please consider hitting that Subscribe button and following along on our adventures!
I’ve seen two different chain install on the phasers? I’ve seen one has the double link chain on the exhaust phaser and the single link on the intake phaser. I have also seen it vice-versa? Which is correct?
Mine only does this when going around average bends on the highway at highway speed also does it when i hit a rough patch in the road but if i drive without bend i never experienced any wheel vibration at any speed could this still be the rack. Mine is an 11
I know I am quite late to your video and the one bit of video I was looking for is to get the video cable from the headliner to the back of the radio not sure how to route it
Found this video because I’m thinking about doing my new fiestas brakes (I’m trying to build a budget n/a ~200hp track car) so obviously gonna need the extra braking power came here to ask if you would think the whole job would be relatively similar it’s also a ‘13 hatch
Do you happen to know if hatchback and sedan seats are interchangeable? I'm working on making an outline for a sedan build and this is one of the things that's tripping me up, I'd like to put a set of ST seats in her
Wait did I understand correctly? You had perfectly fine face lift beuty and you swaped it for the ugly 2013 looking front bumper? I want to do the oposite, with mine 2013. I love the look of facelift.
What size screws did you use for this 2.3L TB please cause they are longer than the 2.0L TB as I'm in the process of purchasing a TB for my Focus? Thanks for the knowledge man
May 08 2024 ... just an FYI ... I finally did a factory reset of my old radio, I figured if it messed everything up I'll just get a new one. Well it worked! The radio did a complete factory reset and everything worked as it did when it was new. All the buttons functioned as normal and it still is a radio lol. That said however I think I will order a newer unit, the original one will not do any updates anymore. My car is still mint and because of covid mileage is low. It deserves a new(er) radio ... again thank you for y our help .... really would like to see more videos as you have done in the past ... you both are very entertaining and knowledgeable 👍
So i didn't find your video until after i put my cam caps and timing in all in. I went 90 degrees not 45 accidentally . Will that hert anything you think?
Bro thankyou for this amazing video , i never worked in cars but after watching your video i feel pretty comfy doing, i just need the pice to replace the shifter i don’t know where to find ! i definitely subscribe your chanel Thankyou Again.
Good afternoon Blessings question does the raptor 2014 have a trailer brake question can you install trailer assistant on the for f150 raptor 2014 or not
Is your garage 20x20? mine is and I am still collating how to install it, received mine yesterday and had things out of box and both columns up wheels and handles on. My garage if full of boxes and stuff UI do not have space to move them out , I made space for the max jax crate over the last week but stuff I moved out of the garage into the house already used all available house space I got so thinking really hard how to re-arrange everything, on the left looking to the street from the garage I have 2 feet from the wall to where the garage door rail runs but those 2 feet are used with shelves, on both sides now the columns I believe the one that goes on the left pretty much lines up its front with where the garage door rail runs, so the front of it would be around 2 feet from the wall then choosing how wide to set; I do have a Chrysler Town and Country which is our biggest vehicle and barely fits in the garage as the van is 16 feet long! so it will be tight to work on it with the garage door closed as I would have only like a foot and half of space in front of it, that is installing the columns half way of the length of the garage, but my other concern is when it raises, the mini van is pretty tall too and it may touch the garage motor light on the right as raising up? I have measure over and over and cant still figure out if I should install them columns center of garage or at 11 feet from the garage house door, leaving only 9 feet up to the garage door; to make matters better I also ordered and received a Mud Mixer for future slab work in the yard and the box is huge as well in a pallet and that I cant take out of the garage so have to make space for it as well by removing more boxes or items; everything was simpler years back when I lived in an apartment as none of this could have taken place but I would not trade it for a second! The slab is for a planned 16x12 shed/storage where all the crap would go and then garage would be usable as work space if not to park at least one car; we got a pretty big driveway 9 cars fit there fine so i have never seen the garage as needed to park a car unless I would own a very expensive car, in the family we got 4 cars but for now 2 of them need engine swap which is why I bought the lift, I did an 80% total rebuilt of a 2004 Toyota Corolla and that took me from first tear down to start again 3 1/2 years and many times I wished I had the lift, well now i do because I know better than to embark in another engine teardown without it, i think one job for oneself where saving shoulders and back pays for it loosely. Body parts are priceless!
Date March 13 - 2024 ... I have had this radio in my Focus for several years now... was inspired by your videos. The radio still works, however, some of the functions no longer work like the home button and the view what apps are open button. Also I can no longer download apps. It just goes into a pending loop and nothing happens. I have tried several methods to trouble shoot, but nothing works. My question is: have you done a complete Factory reset? On the Android level! and if so does the radio return to being a radio or is it just a tablet after the reset? I can't seem to find an answer on line. I have done the factory reset for the radio itself and it basically does nothing. Your help is greatly appreciated.
We have never done a factory reset. So not sure exactly what would happen. There is someone in the Facebook groups that sells firmware to upgrade these. (Haven't gotten it) but that might be a good route to try. Otherwise, you can try to do the reset and if it fails an upgrade would be in line. I ended up getting a newer version radio.
I can't tell you how relieved I was to find this video. I'm doing a stud/roller rocker (same rockers except 1.7ratio) on a set of gt40p heads and using the LMR kit. Although it's a pretty straightforward job it's always a bonus seeing something done that you've never done before....before you do it. I think you're the only one with a video on this install, Thanks!! edit: I'm going to use the two nut method, not use the poly lock to torque my studs.
Hi, I just had the same issue with my 2000 DX Nissan Patrol, so I put a 1/2” inside dia. x 200mm Hose over the drain pipe and cable tied it in place. The other leak was from a cracked evaporator box, which I sealed with T Rex Gorilla tape, all fixed no leaks inside now. 8/03/24.