“I like the A, B, C, D marked hardware because in the install directions they reference use screws from A or B, etc…” Could you let me know where this is? Where are these “install instructions?”
The instructions are in the Ring app on your phone when you go to setup the doorbell. Before I hung up the doorbell, I connected the doorbell with the app. At least, a few months ago, that is where the instructions were located.
@@AmonnRa depending upon your beard thickness and how often you shave, 12-18 months is recommended If you don't have a thick or fast growing beard, the blades may last longer.
@@ryan.swanstrom i shave often because I hate beard but problem is I have sensitive skin and sometimes i cut myself while trying to shave mustache with cartridge razor so i'm interesting which razor is best for close shave and sensitive skin between Panasonic Arc 5, Braun series 7, Philips one blade and Philips s9000. Braun series 9 is too expensive
I have never used it, but I think it for feeding a single page thru the printer. For example, maybe you just want to print just 1 document on blue paper. Or print a single envelope.
Its not bad for the price. normally I use the Logitech MX Vertical for a everyday mouse but this one is good for those not looking to spend 100 on a mouse. great review by the way
Question I have that smoke detector the battery is good and when I press the test/silence sound and blink red few times, after that the red light don’t blink no more do you know is that good or I should just replace it ? Thanks
I don't know for sure what that means. However, I would say, if you are unsure if the smoke detector is operating correctly, it is a good idea to just replace it.
Love the 9 Pro! A little bit of a learning curve for me, but I have had it since October 2023 and it is what I use, no more wet shaving for me. It is not perfect, but it does much more right than wrong and that is what matters to me. There is no such thing as a perfect shaver.
I would agree with this statement. And what works for someone might not work for others. The Braun Series 9 Pro is a fantastic shaver, though. I also prefer to use it dry. It is just simpler that way.
I have this cam, it looks really good, so much so that I had to tweak mines a little, I'm older and this cam will definitely show all your imperfections so buy any high end web cam accordingly
As a barber i would say to anyone these shavers are ment to catch smaller hairs take trimmer tim it down than do it. Why i dont like it when i see average person review product that they one maybe twice a day when we use it everyday
@@ryan.swanstrom I have the series 9 as well. I am thinking of trying a norelco. The series 9 does not get my hair on my neck very well. I shave in the car and you def need to wipe off because the hair gets all over your shirt. I dont like the sideburns trimmer as it's harder to use as other ones. My braun goes through blades about ever 9 months as well and gets expensive. Does your Norelco get closer on your neck?
@@landslide03 You are not the first to comment about the Brauns being tricky with neck hairs. I recently got the Philips Norelco S9000 Prestige and it is awesome. The Philips Norelco shavers do better on the neck, but it took me a couple of shaves to get used to the S9000. See the video on my new channel, Shaver Dude ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-x5-2-QWprR8.htmlsi=aI4zZNqtv9VWps_E
Thank you for this video!! I had no idea what those dingle ball things were for as the instructions didn’t mention a thing about them. I almost threw them away. You’re so helpful!!
Should dive deeper. HP is 💩 anymore. Friends don’t let friends buy HP. They are doing a lot of slimy things to create ongoing revenue streams. They will expire your cartridges to make you buy new ones, block third party inks, and I’ve even heard some of these multifunctional HP printers will not allow the scanner to function if the ink is empty or expired. Brother on the other hand I have had a great experience with. Their more reliable and don’t have any DRM crap.
This is my first Brother printer. So far I like it. My problem with the HP printers is the very budget prices ones, they don't always work well. I have much better luck with the HP 7255e. I don't subscribe to the HP Instant Ink, so I have not experienced the problems you reference.
@@ryan.swanstrom HP isn’t the same as they used to be. Especially in the consumer and SOHO lines. There a lot of anti-consumer information out there if you look. They are all about milking the consumer and there products aren’t built well. I’ve probably had my brother monochrome printer, similar to the model that you have shown, for close to 15 years now. There are no chips in the toner cartridge and they are fairly easy to fill. They have a flag gear which is fairly easy to reset. I have a color brother at my work and the experience has been about the same. I will like by another brother or recommend it to friends. Only other printer I may consider is Epson, but HP has been on the 💩 list for a while.
I have not tried the Andis TS-2 yet. You are the second person to reference it lately, so I may need to test it out. I did try the Andis TS-1, and I would say the Braun Series 5 is far superior as a regular shaver.
@@PaulAtreidees hmmm, well both Andis and Braun are foil shavers. I am not sure why I would expect the Andis to do better, but I will have to try this.
I don't have the TS-2, but I have the TS-1. At that price range, I think the new Braun Series 5 (5118) is a great choice. www.creatorvertex.com/storefront/ryanswanstrom/product/braun-series-5--5118s
Check out my newer channel with just shaver videos, here is one with the Andis ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Q0FjChGkeNg.htmlsi=VyUnPEFjzULb4-a6
So which button u use for swipe between apps like three finger on trackpad and also going back and future on safari with two finger. We need this gestures on mx master 3s . Do I make my point? Is it clear?
@@ryan.swanstrom no but I have the Braun series 3 and in my opinion it’s wonderful and a great budget shaver. It shaved close and comfortable. Another one I like is the Norelco 5000x, and the Norelco aqua touch
@@ryan.swanstrom it shaves closer than the aqua touch in my opinion. It’s smoother. I’ll have to try the Braun series you’re talking about, the 3 gives me a close shave so they must be pretty good shavers if they outperform the Braun 3 series.
Oh my goodness, you are correct. And it has been up for over a year. Well the video is for the 7958e printer...lol...I am sorry and slightly embarrassed now...I will try to fix the title and description
The other blades are built into the head. Remove the head, and you will see a pin sticking up above/below/between the rows of blades. Those pins move the blades in the head of the shaver. Does that help? If not, I can probably make a vid.
It is easiest if you use the included USB plug. Insert the USB plug into your computer, then install Logi Options+ software. From there, you can add your MX mouse and/or keyboard. You can also pair via Bluetooth. I think it works like this: go to Bluetooth on Windows, turn on, select the button to pair a new device. Then press and hold the button on the bottom of the mouse. It should be similar to that.
Thank you so much. That is my goal. The 3800 is a good choice for a shaver under $100. However, Philips Norelco just came out with the 3900, which I haven't tested yet.
