This channel is dedicated to those who are seeking information about fire arms in general. I will do my best to answer all sorts of questions about weapons, ammunition, etc.
I know im way late to the video but i found a great solution to jamming my paw paw has one of these amd couldnt use due to jamming if you take the dummy rounds out completely and just have a few 22 bullets to hold the tension it works wonderfully the dummy rounds was making it was to stiff they kept blocking and holding the spring up yes you will have about 5 or 6 byllets you wont ahoot ever but it makes it work alot smoother i also recommend taking it apart putting it back together to tune the spring tension having it to tight can make it jam as well hope this helps anyone thats looking for the info
I thought that Glocks never malfunctioned. Bummer. Perhaps full charge factory ammunition would not have malfunctioned. Sounds like under powered remanufactured ammunition. Personally, I would have sent it back to Glock when I discovered the 6+ pound trigger and asked for a full checkup, that is, if they will do it. I have had four Glock 19s over the years and I never experienced a malfunction.😊
**Remington 870 Super Magnum combo with laminated wood stock** I was looking for a mag extension for my shotgun and I saw and ordered the Choate 10-round (+5) extension. I forgot that the smooth bore was a 26" and not a 28" and while waiting for my order to arrive I was already thinking about ordering the shorter 9-round extension as I feared it would look terrible. I received it and I won't be ordering the 9-round. The extension is only one centimeter (less than half an inch) longer than the barrel and it all looks fine to me. Just make sure to order the MATTE extension and not the blued version and it won't clash with the rest of the finish of the gun. To each his own but to me the length difference isn't a problem.
Holosun 507C V2. They not make the V2 version anymore because the (2) large buttons on the side make it look like a Trijicon and they were going to be taken to court. So now they only make the 507 X2 with the (2) small buttons side by side. I wish I would have gotten more of these before they stopped making them.
I theorized that would be the fixed to my 930 SPX tactical . I am a trained machinist so I had insight some what on metal and radius vrs chamfer edges. My shot gun had never failed to function except to load the first round from the fully loaded tube, I thought the pressure of the spring must be jamming it into the edge holding the shell in the tube. THANKS MAN . SOON I HOPE TO FIX IT
Thanks for this video! I started making one and was getting misfeeds. I turned part of it into a #short. Hoping leaving the drums loaded for almost a week will give me full dumps. I know already the gun has to be very clean and lubed, and having it suppressed doesn’t help.
wow, I'm impressed Glock had the balls to call this a feature. I can find my nipples on a warm day while wearing oven mits before I can definitely tell you whether a gun is loaded based on a tiny bump on the extractor. I'd feel less insulted if they just admitted that it doesn't have a chamber indicator.
Tac Dad, the 91560 is manufactured in the Czech Republic. The 95160 is manufactured in Kansas City USA. Just something to keep in mind. I don't think it matters to much. Both can be purchased for $350 nowadays. Great firearm for sure.
In 2004 I bought a 17L and a 24 from my local FFL... In 2010 I sold my 17L, and spent two years looking for another one. Ended up with 900 dollars in a "unfired" used one, from a guy at our club. Looks like theyre in full production now, and also offering a Gen5 version, and either can be had for around 700-750. Im glad Ive got the older frypan finish, but I would jump on a new gen 3 if I were in the market... Cause you never know when Glock is going to go back to limiting them to 1000 gun runs.
Brownells slide, ahhhh. Say no more. That's why your getting so much wear. Those slides are usually out of spec in several places. I'm going to buy the cmc barrel for a 34 build. With a Zaffiri slide.
I'm looking to buy one of these Kel-Tec gen 3 gen 1 you had multi mag Gen 2 you went to Glock mag gen 3 you stayed with Glock mags you upgraded the whole rifle but you didn't do what you should have done the first time multimag I don't get it accompany this big you added a twist on the barrels why didn't you just add the multimag from the get-go I don't understand a company this big still struggling to get a right a lot of people have 9 mm of other brands why won't you have made it so it'll be easier for the buyer to have it easy and use what they have on their 9mm pistol
Is this the gsg-16 110 rd drum mag? Im jus curious cuz i swear i saw a different gsg 110 drums called the gsg-ati or something? I just want to know wat one will fit the ruger 10/22. Any advice would be great. Thank u for posting!
Look it up, the firing pin safety for the P10 only work when the gun is fully assembled and cannot be tested when taken apart, the system works in a way people don’t understand causing this confusion, it’s not an issue to my knowledge, when fully assembled it is fully functional, the striker spring also doesn’t get fully extended before releasing, not to mention it’s not fully pre cocked so a firing pin block is entirely redundant, the gun is perfectly safe and fine
Meanwhile, May 2024 and look at the Glock web site. They announced the G17L Generation 5 release ❗ Something Is wrong with your gun. My nearly new 2014 production 17L Gen3 that I bought in 2020 has a trigger pull of 3 lb 3 oz. STOCK. Did you lubricate yours ?
CB. THANKS FOR TELLING MY WIFE WHOS HER DADDY!!!!! During my 34 yr LE career i needed and purchased a chest rig , bought some time ago WORKIN UC. now have Retirement job flying armed …chest rig way too snug for my sig 40 cal 226. Quality materials. I Sent it back saying I was 50 lbs happier but rig too tight . “😮 Just charge my Am Xp card whatever I , trust you “ Wife was shocked and scolded me like THE Bossy 🍀IRISH GIRL SHE IS…Met her on the job still hot looking. , shes retired LE. Told HER “ Just wait Sweetie Pie , I’ll bet they hook me up. I bet they won’t , then you can hook me up.”❤😈……. Within one week I got it by FED Ex. Wife QUIPPED “ OH THEY REJECTED YOUR PACKAGE CAUSE IT WAS LIKE YOU Soo OLD. Can’t do a thing with it, they don’t service it cause it’s OUT OF PRODUCTION. 🤭 WE READ THE LETTER FROM CUSTOMER Service. Looked like new…I noticed New Straps . Leather was cleaned and mink oiled….fit like a glove with room to spare and extend. She read it out loud , with a smile….”Thank you being a dedicated customer and trusting us with your life .!!!! “ NO CHARGE WARRANTY SERVICE……inside were two mint candies. Wife grabbed me by the chest rig saying , “ Guess its TIME for me PAY UP..FOLLOW ME BAD BOY….” ❤🌪️ .Thank You Cross Breed …….I got my balls back….
From what I have experienced, there is a tiny spring that has somehow got out of proper position.. All one has to do is, manipulate the spring end over to the other side of the "Firing Pin Block" or what CZ calls the "Automatic Safety" This spring is called by CZ the "Automatic Safety Spring" This spring either is sometimes shipped with the spring installed incorrectly or is accidently manipulated out of position during cleaning.
