I've got to do this job on the weekend. I came on here thinking there'd be no chance of a tutorial but typed in "Replace roof mount aerial on Hyundai Getz", and low and behold... Here we are!!!
There are two air-bleed screws to allow trapped air to escape, during filling, one at the top of the left side rad, and the other at a coolant pipe at the front of the engine, open the lower one first, until coolant runs out and close it. Coolant level should be at the base of the filler neck when completed properly. Run it after filling, allow to cool, and re-check the level in the rad.
I was stuck in France today when the ciggy fuse went meaning at 34 degrees the coolbox was in trouble. Despite having the haynes manual and the factory manual ...they both gave incorrect locations , Coming across this video saved the day so thank you so much for making the effort to help others ..it is truly appreciated . Why on earth the numbering is pretty much invisible and there is no layout diagram seems ..well just ridiculous . Thanks again . All the best , Bill from the UK ( in france !)
@@bill7853 Thanks Bill. It's nice to hear stories like this, and I'm glad it helped you. That video is around 10 yrs old now, glad it's still helping folks. Had all the same problems as you when my cigarette lighter fuse blew. Ford should be ashamed of themselves.
just got an 07 for focus with an after market stereo. On my way to rip that thing apart because the dash lights and tail lights wont work with the 10a fuse popping right away. thanks for the info!
I like your accent 😍 and great video thank you I just got my 400 DRZ SM 2007 year and notice the little tank bellow (sorry I forgot how it calles) is cracked it has a little big hole in it . should I take it seriously? Or can wait after other things 🤔 By the way I from Chile, south America 🖐🏼
After seeing your video I'm going to attempt it. It's on a 2010 Hyundai i10 but the ariel looks the same. I've yet to get the ariel but I've now had a look at the lining and I can see that it comes away just like in your video so now I know I can attempt it. Thanks again.
I'm in the process of assembling a new BMX bike for my Grandson's Christmas. The bike came with no instructions other than to take it to a bike shop for professional assembly.....like that's going to happen! Only took me about twenty minutes to assemble the whole bike....with the exception of the reflectors. Those were a whole nuther ball of wax! After 45 minutes of fiddling....I search and found your video! You Sir, saved the day. Thank you!
It is on the right side in LHD models otherwise exactly the same, thanks for the video now on to see if I only need a new fuse or a new windshield wiper motor😅
@@DjClarky78 I did! Thanks to your video, my old clapped out Getz now has a brand spanking new antenna. And some Hammerite brushed on, where rust was forming under the old base.
Huge help today - installing these on the wrong spoke seems straight up dangerous on my rim since my reflector could have rotated and caught on the frame. Saved my bacon, thanks.
At 3.27 roughly you mention the metal bit hits the roof and the nut goes to the left side. Would be the same on a Nissan Juke 2017 as I can loosen the nut what hits the roof which leaves the antenna base loose but can’t get it to come out off the roof. Any ideas much appreciated
