Did anyone else succeed getting the rotating cover separated from the inner housing? Its locked in place. I'm pulling on it with all my strength and it does not budge. I need pointers for this magic move. TY
@@jozsefledacs-kis2134 Yes, bought trimmer in 2019 and now in 2023 the capacity of battery dropped suddenly. I tested for 2 weeks and the voltage remains steady so no self-discharge issue. Must be really only the capacity of battery. I can fully charge to 100% but then its depleted in constant use within 15min or less. Before 2023 it was working for 40-50 mins straight without any issues or recharging. Would have expected more life in Li-Ion battery then just 4 years. And it was not even used very frequently, maybe 5-6 times a year. I also made sure to keep it charged while not in use to prolong battery life. Never left it discharged. I couldn't have done more then 30 charge cycles on the battery so really poor battery performance on this product :(
I have the same cage as yours but only for my 1 pacific parrotlet and even then I think it’s still small. You have 2 budgies, they are slightly bigger than my bird, I would suggest you buy them a bigger cage. Like maybe M02 or L size from Vision but I agree with you that when we remove the tray we have to remove everything, it’s actually quite annoying haha 😅 I guess, I would suggest other brands than Vision as Vision quite heavy as well
Thanks for sharing! I don't understand that these fake soldering stations are being taken back or there is a ban/penalty fine for the makers of these fake stuff. you can't and shouldn't just (use the real brand/name/logo)??
Why is there only two connector slots on this tip even though four wires are going to the handpiece. I guess the side of the bit is earthing and two wires to the connectors but where is the fourth wire attached to?
MY OLYMPUS DP-11 WONT WORK IT TURNS ON BUT THE BUTTONS WHEN PRESSED WONT RESPOND DOES ANY ONE KNOW A REPAIR I HAD IT STORED FOR 5 MONTHS THEN FOUND IT USED IT AFTER 5 MONTHS ON NON USE NOW IT JUST STUCK HELP ANYONE KNOW WHAT I COULD DO REALY LOVE THE CORDER DP-11
Hi! Could you please share what is the focal length and the magnification ratio? They should be written on the lens you have there (if you still do). That should help understanding what lens to choose acording with what camera we use (I only have webcams, for example). Thank you very much for the video though!
I've googled for the past hour and I can't find the lamp.closest is the 12 Diopter LED Magnifying Lamp by Omano but I dont believe it will be large enough for something like this. Dang samtec why couldn't you have listed who made the lamp..
Mine is about 8 years old and still going strong! Only things I would change is the bottom dust filter coming out the front instead of back and a back plane for hot swap drives.
@@Elliott_7 They don't make them any more. I got mine in 2013 I think. The closest thing now would be the Fractal R5 www.fractal-design.com/products/cases/define/define-r5/black/
@@Elliott_7 This is a great forum for build your own NAS if you scroll down you will see their choices of cases. Some are nice. I like the Cooler Master N400. The forum is at forums.serverbuilds.net/t/guide-nas-killer-4-0-fast-quiet-power-efficient-and-flexible-starting-at-125/667/9
Anyone know if the handpieces still available anywhere? Someone is selling the base units for very cheap on eBay buys it's no good if I can't get a hand piece.
To remove my battery in an acer aspire E laptop it says i need a #3 spudger. Am i supposed to run it around the edge of the battery cover to remove the battery to replace it? There is a tiny circle under battery cover on right hand side & it has an indentation & a small battery pic. I think im supposed to press a flat head spudger or pencil in there to release battery but im not sure. Iv never heard the term spudger before. Does anyone know if its safe if i use a pen or hairpin or should i take it to a computer shop? I dont have much money & last time i took it to Murwillumbah NSW pc computer shop the owner tried to tell me it was too old & (its 5 years old) to just give it away to him & BUY A NEW ONE LOL - i dont have much spare money & im wondering why the battery isnt charging.. Any advice would be superb! Thanks for reading this & hope someone might know how to help me get battery out.
I'm sorry that nobody has replied to you but I'm here :) You probably threw the laptop away given that this comment is 10 months old but if you did'nt here you go. I'm a 11 yr old and for an odd reason I like to repair gadgets. I have so many tools and I have saved my parents a load of money by repairing their things. A spudger is a prying tool used to pry up displays, batteries, back covers, and more. They come in metal and in plastic. I don't know much given my age but I know that using isypropyl Alcohol works. So What you need in order to pry up your battery is some isypropyl alcohol and spudger. you can find them for pretty cheap online since you are trying to save money. an old card also works for prying but be careful!! Hope this helps :)
Ok so I’ve got a question about trying to install OS X 10.5 on an iMac G5 Heres what I have available -The G5 of course -A 2008 white MacBook that can run leopard (intel core 2 duo) -The MacBooks original install DVD’s -a 16GB flash drive -a 120GB HDD (and a USB SATA adapter) -a downloaded DMG of 10.5.8 Here’s what I’ve tried 1. I originally tried to install via USB using the flash driver and a DMG. I’ve looked at every RU-vid tutorial there is and every post, nothing, the USB doesn’t show in the G5, no matter what i try 2. Install using the DVD, which doesn’t work because they’re for the MacBook and only the MacBook 3 I tried to modify the discs to support my mac using “the 8 bit guy” RU-vid tutorial (that is very old now) but this (I guess) no longer works 4. Install to the 120GB HDD using the DVD from the MacBook (but it can ONLY do so if the HDD is GUID MAP not Apple Boot, the G5 can’t read a GUID partition MAP Has anyone got any idea how to get 10.5 on the G5 :( I’m stuck with 10.3 until I can get this sorted and 10.3 is just too old to support web browsing now ANY SUGGESTIONS !!!
That's unlikely to work with an installation disk designed for Intel machines. You would need to find a copy of the 10.5 install DVD compatible with Power PC Processors or one that is compatible with both.
I OWN THIS AUDIO RECORDER ONE PROBLEM THE PLAY STOP AND RECORD BUTTON DOES NT WORK WHEN PRESSED WHY WELL APPARENTLY IF YOU LEAVE THIS RECORDER SITTING ON THE SHELF FOR ONE YEAR WITHOUT USING IT CONDENSATION BUILDS A THIN CRUST OF RUST INSIDE THE BUTTONS DAM IT NOW I GOT TO OPEN THE CASING TO REPAIR IT SOMEHOW GOT TO SCRAPE THE RUST OFF THE CONTACTS INSIDE THE PRESS BUTTONS SCREW DRIVER REQUIRED LOL
I think the lens came from the Telesensory Aladdin Low vision magnifier machine. The lens possibly is a 400mm ~ 500mm focal length zoom lens with a magnifier glass in the front. It was adapted to a CCTV camera with a lens adapter. C-mount ? maybe this one will help.. www.instructables.com/id/Ultra-zoom-Macro-for-a-Few-Bucks-DIY-High-Resoluti/