Hello RU-vid! My name is Arafath, and I'm here to bring you guys a ton of entertainment and helpful videos. If you like my videos, consider giving thumbs ups, and don't forget to subscribe for more!
It sounds like what you're describing as a pan out of alignment you just take it pop it back out and it goes into the magnetic brake place then remount the wheel should be okay
The listing I bought from doesn’t have them anymore but if you click the link you can find some other sellers selling it. You can also check on EBay for similar options
Underrated video!! Thank you for taking the time to walk us through the steps AND provide actual feedback about its performance. Really appreciate the effort you spent on this video. Going to be installing 5 of these in a cabin soon with an electrician friend to just provide supplemental heat only for Fall and early Spring seasons (not all winter). Excited to finish up this project and see how they perform. Thanks!
Dear Ashiq, your various ads are very good but your feeling towards motherland is not good. Don't think too big of yourself. If you don't do all the work of life on time, you will regret. Remember we are not weak just because we like you. 
Hello everyone, I connected my Blue Yeti microphone to the Lumix G7 camera. On the camera I set the microphone level to - 12 , then I removed the microphone limiter and turned off the wind noise corrector. On the microphone I set the gain to zero and the volume to a quarter of the total. the voice can be heard very well but I keep hearing white noise in the background even when I put the volume to zero. I think could be a G7 output issue or the USB cable with which I power the microphone from the laptop. Also, the audio jack cable I used to connect the camera to the microphone is off low quality. Any ideas? Thanks
An officer was showing me how they check the tint and on his device it showed a little more than 20 I think like 22 or something. I have tints on my other cars too I know it’s 20 for sure. But I am moving to 35 on this one as my dad now drives this car so if you want, stay tuned for that video.
This is a pass through nut driver. It is used to run nuts up on long pieces of threaded rod. The threaded rod can go through the hole on the back of the nut driver. The hole isn’t used to store any of the sockets. The orange plastic piece isn’t used for anything at all it is just there to imitate a piece of threaded rod and show you that it can go through the nut driver to make it easier to tighten up the bolts
