Ningún problema, lo acabo de hacer ahora mismo y no sale fallo motor. Encima así al pasar la ITV solo vuelves a conectar el cable y listo. He cerrado tanto el cable negro como la boca de la EGR con un manguito de silicona.
ECU remapping is one solution (EGR disabling). This car is working well ever since. The new EGR didn't fixed the problem. Electric connection was fine. Probably the ECU got faulty.
I'm not sure about the length of this operation. There could be multiple cars at once in the service, plus waiting time until the new replacement parts arrive.
J'ai le même problème, la ligne df 209 donne du positif, du moins, un court-circuit, nous avons tout essayé, ça ne marche pas, quelqu'un qui connaît la solution peut-il m'écrire s'il vous plaît.
What is the cause of the shudder when speeding and changing gears 1 and 2 or when the car is crowded? It sways a lot despite changing the gear to a normal one.
I have a Laguna 3 2.0 dci, bought new, with which I did 250 thousand km with the original water pump and the original accessories kit (made by Gates), except for the engine pulley that I changed at 170 thousand km and I intend to do 300 thousand km with the water pump and the accessories kit
Tocmai ce am terminat si eu de instalat cureaua asta. Se rupses fulia de la arborele cotit si am schimbat si intinzatorul, rolele si cureaua daca tot eram acolo. Exact aceeasi masina am si eu. Automata. O masina extraordinara pentru familie. 170 de mii de mile are batrana mea. Si voi face tot ce pot sa o tin in viață cat mai mult!
question: I did not see that the inside brake pad has been attached to the piston so the inside brake pad gets pulled away from the disc when the piston retracts, is that "optional"?
Bonjour, j’arrive pas à marcher les quatre baffes pour Renault espace quatre, il marche que deux côté passagère, il est deux autres côtés chauffeur il marche pas. Est-ce que vous pouvez me donner des renseignements s’il vous plaît merci.
The air pipe from the intercooler to the turbine is in motor oil. 100% there is a microcrack. The next node after the removed EGR valve was not washed from soot. Assembly and disassembly of car components is probably carried out for the first time. The actions of the car service worker are extremely unprofessional.
If you remove 3 more plastic covers from A Pillar and on the bottom then you have much better access to upper bolts. This step take like 2 minutes. Very informative video 👍
Hi, thanks for video but as I know greasing of anti roll bar bushes is not recommend. The anti roll rod before rubber bushes replacing should be cleaned and degreased only.