Hi, Yes, the LV Flex Battery has a 10 year warranty in Australia where we sell these units. Please refer to the manufacturer's documentation for full warranty details. Thank you

Hi, yes you can install the SH10RT without batteries and use it without connecting to batteries.

Hi @tobi3563, Yes, you can connect multiple SBR stacks in parallel to achieve a higher capacity. Up to 100kWh total.

Hi, Yes both of these are Hybrid Solar Inverters so they can provide power to the home while charging the battery with the excess power from the solar. Thank you

Hi @kairooneeru8981, Yes, there are times when we do sell equipment for delivery outside Australia, so please feel free to reach out via our website. Depending on where you are located, there may be differing access to manufacturer warranty and technical support.

Hi, Sungrow does not recommend the SH10RT for off-grid use with a generator but rather the SH15/20/25T inverters

@@andrewthomson7554 I would use the generator only by energy shortages during an possible Brown or Blackout as an backup solution. Normaly my System works on-grid. Do I understand it right, it works with the SH10RT in an emergency situation may be for a short time and Sungrow has possibly optimized the new inversters and recommends them for permamently off-grid, right? Have you any experience with an SH10RT and a generator? Thx for the answer and the Video.

@@johnescobar3199 Hi John, the generator integration definitely won't work for on-grid situations even with the new models. When the inverters are installed on-grid, they are programmed with the grid safety parameters. Ie. Australia A. In order for the inverter to work with a generator, the inverter needs to be programmed that it is being used in a micro grid situation, this allows the grid parameters to widen and work with generators.

@@andrewthomson7554 Hi, i know i have to disconnect the Grid port from the grid, connect it to the generator and configure a few settings for off-grid. This part is easy and no problem. My question is only, have you any experience with the SH10RT in off-grid?

Hi Andy, each 5kWh SBH module has a nominal power of 3.52kW so you would want at least 5 for the 15kW hybrid and 8 for the larger hybrid to be able to achieve the inverters continuous AC ratings.

Thanks Matt, we always appreciate the kind words.

Thanks Mark, we couldn't agree more. A great match of hardware and software!

Thanks Matt, we appreciate the kind words.

Hi @walters2023 , the availability timeframe for this charger is soon to be announced. When it is launched it will be available in our Sydney Warehouse. We recommend contacting a Supply Partners Account Manager on our website to keep up with the latest information on this solution. Thanks

@@SupplyPartners thank you for replying, looking forward to it. Please do a video when you receive it.

Can you please tell me, if this can be use in 3 phase residential property.

@@walters2023 This EV charger can work in some residential scenarios, but it will take up the majority of the electrical supply to the home. This is referenced at 2:38 in the video. Thank you.

@@SupplyPartners Thank you for replaying, what about the sungrow 22kw ac charger AC22E-1 is that coming to Australia.?

Hi @antesimac5757, pricing and availability for this charger is not yet available in Australia. We recommend contacting a Supply Partners Account Manager on our website to keep up with the latest information on this solution. Thanks

I just found out what they cost. A bit too expensive for home use.

Hi @antesimac5757, these units are not intended residential use. Their recommended application is for commercial and destination charging.

Thanks Scott, We appreciate you giving it a watch.

Thanks for watching Matt. Great to hear you enjoyed it mate.

It is N Type

Hi, This panel is monocrystalline and has great low light performance due to the N Type Cell Technology.

Hi Ralf, It is relatively straightforward however there is a specific process for the installer to follow which includes ensuring the existing battery modules are at the same Stage of Charge (SOC) of the new battery module. Thank you

Hi, They are not always the same. In the case of the Trina Solar Vertex S+, it is Dual Glass, meaning glass on the front and rear face of the solar panel, but it can only receive light through the front face of the panel. This panel would not be classed as Bifacial. There are other panels that have glass on both faces, and the solar cells exposed on both faces of the panel. Those are an Bifacial Solar Panels. Thank you

@@SupplyPartners I believe that there is also a bifacial Vertex S+. Hard to find in Britain though.

Thanks Ivan! We might have to do a Clenergy video next!

Hi, Not at this stage. This is launching in Australia in October and we recommend contacting a Solar and Electrical Business in your area who installs Fronius products at that time. They will be able to give you the most accurate installed price as we are a distributor. Thank you

I notice that the clamp sometimes tilts sideways on a lap rib depending on the roof overlap design. I have also seen one roof profile where all the ribs top trapezoid sections are asymmetric so you can't avoid a clamp tilt. If a clamp is placed on a lap and then tilts, this will create extra pullout stress when it is twisted straight to align with the rails, especially when on a purlin. I have also seen some engineers instructions requiring the placing of clamps over purlins, however they made no mention of placing on a lap. It is hard to get a definitive answer for my roof as nobody can identify it.

Not really practical in rooftop solar plants. Clamping is a better solution there. For ground mounts, we can do bolting.

Im guessing you dont need it?

It's ground. For signal, not really needed.

Hi, I find my devices do not communicate with each other, only power on, so what can I do, can be resetted?