Тёмный
Mellif Tools
Mellif Tools
Mellif Tools
Подписаться
With the goal of making life eco-friendly, Mellif® designs and supplies adapters & tools that allow you convert your existing battery system for convenient use in other devices or tools. Instead of being a knock-off tool brand, we are trying to bring more great innovations to your garadge. With Mellif, you can use your battery packs on kids ride on cars, outdoor camping devices,etc.

Rather than buying a whole new system, Mellif range lets you use your DeWalt®, Makita®, Milwaukee®, or Bosch® Professional 18V battery on different power tools and other equipments.

Quick and easy to attach, Mellif gives you access to cordless DIY platform, with no need to switch from your preferred battery system.
Комментарии
@stevetranCA
@stevetranCA 14 часов назад
Only cut Toni weeny little branches and leaves???
@Mellif-tools
@Mellif-tools 7 часов назад
you can check my other vids
@ovidiugrama7713
@ovidiugrama7713 18 часов назад
Nice
@СергейВласов-х2с
Выходит такое устройство можно считать как погружая пила.
@chrise202
@chrise202 4 дня назад
What we need is a 220v to ~18-20v converter which allows for 30-100amps draw. Whoever makes this will become rich AF.
@СергейВласов-х2с
@СергейВласов-х2с 7 дней назад
Здраствуйте! Подсказите пожалуйста величину хода пилки.
@Scotspict
@Scotspict 7 дней назад
I have a Bosch Mellif adapter so if you do a teardown I would be grateful, thank you
@Scotspict
@Scotspict 7 дней назад
I would like to ask if you think all Mellif battery adapters in your opinion have an auto shut off or (undercharge) protection? Many thanks
@mikehrywnak8360
@mikehrywnak8360 7 дней назад
how do you tighten chain tension on the cs-dcb20, and remove chain?
@f.alonsosantiago3200
@f.alonsosantiago3200 7 дней назад
There will be a version for Makita batteries?
@Mellif-tools
@Mellif-tools День назад
yes the dewalt version and makita version will be available soon
@ChildMonica-b1z
@ChildMonica-b1z 7 дней назад
Hall Dorothy Hall Jessica Miller Donna
@mattmain237
@mattmain237 9 дней назад
Thats awesome! I just bought one, so i was hoping itd cut out and not screw up the battery! Thanks
@Mellif-tools
@Mellif-tools 9 дней назад
you‘re welcome please feel free to contact us if you have any further questions
@mattmain237
@mattmain237 9 дней назад
@@Mellif-tools - will do! I will report back on how it does! Do you happen to know what the duty cycle on that m18 model is?
@Mellif-tools
@Mellif-tools 9 дней назад
@@mattmain237 no less than 20 mins
@mattmain237
@mattmain237 9 дней назад
Im going to buy one to inflate 4 paddleboards. I used a high volume pump for the 90% and my milwaukee small inflator for the final 12psi inflation. It could barely get through 3 before overheating. I'll check back and let you know how this goes!!!
@Mellif-tools
@Mellif-tools 9 дней назад
we have a paddle board pump for milwaukee just check the link in my bio
@MrBoomSkate
@MrBoomSkate 10 дней назад
Could've made it look less like DeWalt
@jonathangoin
@jonathangoin 6 дней назад
Battery looks and connects just like a DeWalt!!! The whole thing is a sham!!!
@aaronanderson6362
@aaronanderson6362 10 дней назад
After those three cuts the battery required another 40 min charge
@ScottieBMan
@ScottieBMan 10 дней назад
Totally wrong, I can see you don’t own dewalt tools
@JB-kg2hg
@JB-kg2hg 10 дней назад
@@ScottieBManit’s not DeWalt 🤷🏻‍♂️
@aaronanderson6362
@aaronanderson6362 10 дней назад
@@ScottieBMan that look like a dewalt to you chief??? Also it was a joke
@ScottieBMan
@ScottieBMan 10 дней назад
Touché lol!
@hunthse
@hunthse 10 дней назад
What do you want to link for? Are you in the hanging plywood business because that's the thickest that thing will cut through.
@kadeskorni296
@kadeskorni296 10 дней назад
For sure would cut through 2x4s and thus would be a great tool for framing.
@burghuin
@burghuin 12 дней назад
Really enjoying the Mellif tools. Good to see an expanding of the product line.
@Mellif-tools
@Mellif-tools 11 дней назад
thank you for your support!
@jesusbarraza6462
@jesusbarraza6462 12 дней назад
Link bro !!
@csb772
@csb772 12 дней назад
You can tell the mellif tools nuts were not torqued down as much
@squintlaclair1963
@squintlaclair1963 12 дней назад
I can't find it anywhere, i wonder if they quit making it
@Bigtbone-x7n
@Bigtbone-x7n 12 дней назад
Where do you get the 18volt battery and battery charger doesn't come with the tool
@WildeTernence-f9r
@WildeTernence-f9r 13 дней назад
Harris Daniel Thompson Eric Taylor Melissa
@woolardjw
@woolardjw 14 дней назад
Very poor quality product. Dont shill this bad quality device.
@АндрейПисный-ш6ю
@АндрейПисный-ш6ю 20 дней назад
Вот обрезание делать за жень можно столько денег заработать.
@electriciantv5174
@electriciantv5174 21 день назад
I got one of those over a year ago still works great just don’t let the battery get too low I don’t believe they have low cut offs in them
@Mellif-tools
@Mellif-tools 19 дней назад
yes we do and we have a vid about testing the low voltage protection of our tool
@electriciantv5174
@electriciantv5174 19 дней назад
@@Mellif-tools that’s good to know thanks
@SilverBull-r3c
@SilverBull-r3c 21 день назад
Good tool 👍
@Samuel-j5r
@Samuel-j5r 21 день назад
scary as hell
@L0wSkiller
@L0wSkiller 21 день назад
The finger remover 9000
@quinterofelixchidez
@quinterofelixchidez 24 дня назад
Will it charge dewalt to makita
@crherniman
@crherniman 24 дня назад
Is this a pouch cell battery design, like the powerstack?
@Mellif-tools
@Mellif-tools 24 дня назад
no it's not a pouch cell.It's a 18650
@quinterofelixchidez
@quinterofelixchidez 25 дней назад
Which charger does it take Makita or dewalt
@timwhite4288
@timwhite4288 25 дней назад
Some brands top of the line claim 1000 ft lbs or more. This one 257. I have one of these. Think about it: 250 ft lbs is applying 25 lbs force on the end of a 10 ft breaker bar. If so, that should snap jammed lug nut studs right the hell off!
@bmwbaker
@bmwbaker 25 дней назад
slow down and give a little narrative. Why do you have to change them? the manual on this is horrible.
@willietownsend3547
@willietownsend3547 26 дней назад
I have the one for 18v Milwaukee but it only runs for few seconds and stop. I turn it off and on again but stop again.
@Mellif-tools
@Mellif-tools 26 дней назад
could you please send your order number and a video that contains the situation you're describing to this email address:info@mellif-tools.com?We will help you solve it
@willietownsend3547
@willietownsend3547 25 дней назад
@@Mellif-tools I just sent email with video and order number
@ToolsNGames
@ToolsNGames 26 дней назад
Is there much of a difference between the older one I have and the new one?
@Mellif-tools
@Mellif-tools 26 дней назад
yes This charger is specifically designed for Mellif 20V batteries and is not compatible with dewalt battery.But the one you purchased can charge dewalt 20v battery
@ToolsNGames
@ToolsNGames 27 дней назад
You guys should make a robot vacuum that runs on dewalt batteries for a garage
@Mellif-tools
@Mellif-tools 26 дней назад
for now we don't have this plan but thank you for your suggestion
@RogerLozanobravo
@RogerLozanobravo 27 дней назад
Podrías porfavor regalarme la referencia del regulador
@AIuminum
@AIuminum 29 дней назад
When is coming to the UK?
@Mellif-tools
@Mellif-tools 26 дней назад
for now we don't have an ETA
@AIuminum
@AIuminum 29 дней назад
When is it going to be for sale in the UK?
@Mellif-tools
@Mellif-tools 26 дней назад
for now we don't have an ETA
@BluJns
@BluJns Месяц назад
🎉
@AnnTrista
@AnnTrista Месяц назад
Gonzalez Thomas Lewis Gary Hernandez Elizabeth
@brunonator
@brunonator Месяц назад
How does it compare to the dewalt xr sds? And does it have any vibration control?
@patrickday4206
@patrickday4206 Месяц назад
Who doesn't like a milf
@loneczgunner6562
@loneczgunner6562 Месяц назад
Is that ejection port round for something like a shop vac? Asking for a friend
@Choolio94
@Choolio94 Месяц назад
It is round, but in my experience they are too small for a standard shop vac. I 3D modeled and printed an adapter for mine and it saves so much clean up.
@HeadingWatch
@HeadingWatch Месяц назад
Jackson Melissa Johnson Matthew Wilson Christopher
@dianahowe1300
@dianahowe1300 Месяц назад
Ty! Husband was man handling it and you saved the day. 😂😂
@Mellif-tools
@Mellif-tools 26 дней назад
😂😂😂
@SamSintmaartensdyk
@SamSintmaartensdyk Месяц назад
Never seen anyone needing more flux than this idiot
@djediguy2156
@djediguy2156 Месяц назад
What’s max thickness cut Thanks
@Mellif-tools
@Mellif-tools Месяц назад
Steel Sheet: 0.5~1.8mm; Stainless Steel: 0.5~1.0mm, Aluminium: 0.5~2.0mm.In our practice, however, the thickness that can be cut will be higher than this estimate
@gregpierquet5818
@gregpierquet5818 Месяц назад
My DCF911E1 was $150 with battery and charger.
@darrenfisherman3838
@darrenfisherman3838 Месяц назад
Will it work the same though? I don’t think it be good for the tools.
@spartacus4715
@spartacus4715 Месяц назад
Bought one of these and it worked well for a while. Then is stopped working. The motor runs but the chain does not move. I bought off an Ebay business who is ignoring my messages so I contacted Mellif directly who refuse to honour any warranty, saying to take it up with the retailer. Would not recommend.
@Mellif-tools
@Mellif-tools Месяц назад
we don't have a dealer program so we only provide warranty for the customer who directly purchase from our offical website or amazon.
@spartacus4715
@spartacus4715 Месяц назад
@@Mellif-tools Ok. I found this about Ebay purchases. Something I wasn't aware about and seems very unfair to the end user who bought a product in good faith. Regardless of the company policies, it leaves a bad taste in the mouth and will deter me from buying any Mellif products in the future. "My issue is I buy a new product through a seller on Ebay, that includes a warranty, go to return it if it malfunctions & am told by the manufacturer that my warranty is invalid because I bought it through a third party, even though there is no wording about this in the actual warranty language. Ultimately this seems a bit misleading to me & it's happened more than once, this time for an expensive water filter that is not even that old, roughly 6 months+. Now I do not believe there was any foul play through my seller, but it certainly does seem that manufacturers are using this 3rd party cop -out to save them from backing up their own warranties. If this is the case, does that mean that anything purchased on Ebay is supposedly a 3rd part sale & if so then it certainly seems there should be some type of disclaimer. Now when I buy something like my last purchase, I buy it to last & the warranty is definitely a consideration. Now at this time, the seller won't do anything, the manufacturerr won't do anything & if this is the case it will certainly make me think twice about ordering through Ebay again. As of now, the only recourse I have is to file a complaint with the BBB, which is mostly an exercize in futility. Just wondering if anyone else has dealt with this issue & has any suggestions?"