I have a particular problem where I can create applications and add end devices on the eu1 cluster using API but I can’t do the same on the nam1 cluster. It gives error not fund.
Lorawan is not the Revelation of IOT , it is a product of IOT, IOT existed long before LoraWan came along. It is wrong to believe they are IOT, it is nonsense, anybody can buy cheap Nano , PI and other boards and build your own solution for a fraction of the cost. The Security industry has been using the technology from the days of Analogue and the first to go digital with sensors, controller boards, Radio's Phone lines etc.
I've tested this produkt in several homes and i'm not impressed with the building quality. Several of these devices have failed both mechanical and electronical. Futhermore there is no indication of the direktion you have to turn the thermostat to increase og decrease the setpoint. In terms of connectivity its a very fine produkt with long range.
Nice clear video however it doesn't seem to work for me. I simply receive no data (had the same problem with mosquitto). The autorisation seems okay, I see data on my live view when I am logged into TTN but nothing via MQTT. Any ideas?
I cannot connect to teraterm because in my windows "st link v2" debugger not showing any VCP. so how can see the communication between Lorawan End device with thing stack. Is there any method to see this on stm32cubeide.
hlao, permisi. saya izin bertanya, cara melakukan join-request itu bagaimana ya? apakah ada perangkat/end device tertentu yang sudah di setting ketika dinyalakan, dia akan peering manual? atau harus diprogram terlebih dahulu agar misal memberikan pesan join-request dari end device ke server? jika harus di program terlebih dahulu. adakah contoh program tersebut? Terimakasaih
Thanx for the presentation )) One question, what happens if the node emission does fail? Is there a repeat algorithm in one of the upper layers? So, is the transmission acknowledged to be 100% safely sent to the Gateway? Explained at 49:00... thank you! :)
i setup all this but when i run the docker compose it gives the license error....can someone help in this regard? ``` error:cmd/internal/shared:initialize_identity_server (initialize Identity Server) correlation_id=39f6fd7e89c742c89662d5c314604b3b --- error:pkg/license:component_address_not_licensed (component address `123.111.321.22` is not included in this license) address=123.111.321.22 licensed=[localhost] correlation_id=8eb352cc1da24d9b8f37d89af4d07e67 ```
LR1121DVK1TxKS Just purchased this Dev kit , in order to check if i can use it in my project, LR1121 is quite new and theres no library for Arduino i want to use the LR1121 with a ESP32 . does anyone knows how to use it ?
try one you own first. get familiar. easier to troubleshoot when you know what is going on before trying to just cross your fingers plug it in and wish. ya know? that's what half the people do with this stuff. First, check gateway map. If not one close enough, or even if there is one, you may not be able to use it. It's a mesh network - so it's ideal to be in range of multiple gateways. sounds like you need to be the change you wish to see in the world and drop $100 on one for your neighborhood and then tell your friends.
@@bjmurrey Hi, It's been 3 months. I am and have been aware of the limitations you're telling me. This was my bachelor's graduation project which in the mean time has been completed. After the fact, what you're telling me, definetely was not the issue.
@@bjmurrey didn't think you'd be interested but here I go then. I was writing my own software for different purposes including a sensor, then analyzing data and sending that, hence the custom software since the analytics were quite complex. I used a public available library with some comments that it worked for them so decided to give it a go. I had a hackRF to validate that something was indeed being sent. With no way of knowing exactly what I had sent over I had to assume the library was working (since it had worked for other people, too). When it didn't I dove even more into the datasheet checking every single register with the library and found a few faults, still nothing. Decided to purchase another device to rule out hardware defects. Still nothing. Used the secondary device to receive the message sent to ensure the join request was sent correctly, which it was. The format was also correct after having validated every piece of the LoRaWAN specification. I posted on the things forum and got condescending people attacking me for modifying the library because they "like to keep THEIR network nice and stable" which seemed absurd to me since I'm in a different continent. In the end I'm not quite sure why it didn't work but I'm left to speculate there was something not quite right with the chip settings. Something I wasn't willing to figure out any longer. Since I now had two chips at hand, based on ESP32's I decided to use P2P LoRa communication and then use Wi-Fi for eventually sending it to the database that I needed to send to in the first place. I have now passed the project at school and I'm happy for it. I'm still at a loss and have looked with teachers and colleagues what could be the issue but none were found unfortunately. Oh and yes - I have used the stock firmware the device came with which worked perfectly. Considering it only joined the network and sent arbitrary numbers I couldn't use it directly. I contacted the manufacturer for the firmware and they gave me the runaround and then a manual containing all and only dead links. I therefore wasn't able - given the short timeframe - to reverse engineer the original firmware it came with unfortunately.
Hi Ben, thank you for the helpful videos. I am new to LoRa WAN and need a little help. I have an ESP32 end node measuring temperature and humidity, connected to my LoRa WAN Gateway, and connected to the TTN server. I can see my data on the TTN console. My next step is to connect my home MQTT server with TTN MQTT. I would like to visualize my TTN traffic on my Home Assistant setup. I have created the MQTT integration under the application label. What I would like your help with is how to have the TTN MQTT talk with my home MQTT. I cannot find the relevant documentation or video to help with this setup. If you can point me in the right direction, I would be grateful. Thank you.
I have also tried to communicate without success. I would also like to have a contact to obtain information on equipment prices, services, contract conditions and steps to obtain the service.
Olá, excelente conteúdo. Estou tentando entrar em contato com o Lacuna Space e eles não respondem. O sistema ainda tá funcionando? tenho uma proposta de trabalho com mais de 1000 pontos de conexão e preciso fazer um piloto pra aprovação da tecnologia. ja enviei mensagem no site, LinkedIn entre outros. Se tiver um contato valido e puder fazer o compartilhamento, eu agradeço.
Yo también he intentado comunicarme sin éxito. También quisiera que brindarán un contacto para obtener información de precios de los equipos, de los servicios, condiciones del contrato y pasos para obtener el servicio.
This is a beautiful video that is absolutely necessary for growing this technology. I just discovered LoRaWAN but it really fits my use case and I am excited to dive deeper into this technology!
