First of all, thanks for checking out IT FIX on RU-vid! We are a small business specialised in computer, laptop and smartphone repairs. Our mission is to support people who like to repair electronic devices.
Hi there. Thank you for your uploads! Keep up the great content. Can I ask you a question about the PS5 motherboard please? I just want to know what resistance readings there should be on the APU capacitors?? Nowhere and no video gives a clear answer on this. People say this area is very low impedance...but I'm getting a short to ground on lots of these capacitors and also the row of 6 coils next to the APU. The 12V input line is not shorted, but console turns on with one beep, fan spin then straight off. Have you ever seen this? Many thanks.
Hello, sorry for the late reply. I will make a video with the resistance values soon. There is low ohm resistance there anyway, and it might not be a short circuit. I have seen similar issues. In some cases, it could be the APU, but I would suggest checking the HDMI encoder ic capacitors.
i couldn't believe it when you put it back together without testing the power first 😅 isopropyl alcohol is also just called 'IPA' if you want to shorten it isopropyl is pronounced "eye so pro pull". it's an odd word. I have a very similar model HP AIO in parts on my bench right now, thanks for the detailed work and process!
Hello, Unfortunately, I don't have a part number; they are very common DC power jacks and can be found online. I usually buy them as lots and match them with the part required.
Hey there Would it be possible to get a list of the tools used in this video? I've never seen the circular wand that undid the soldering on the Bluetooth chip
@itfixall I got E7470 not charging. I have checked this MOSFET when I plugged the power and pulled out the battery, I found the gate voltage is equal to the S voltage (about 13v). Gate to source voltage is 0. And D's voltage is 0. So the MOSFET is working correctly. Just the Gate voltage is not right. Can you tell what the gate voltage should be?
Thank you sir ... I also have same tablet and i sent the tablet for repair charging port .. but the shop keeper was struggling to open display ... By help of your video he opened and repair my tablet ❤ thanks again
Hello, I have a few questions. What to do if the port is already soldered? And also, what liquid do you use for cleaning the port in the video? Thank you very much!
I own the phone, I did not want to experiment like you, I fixed it for only 3€ with my friend, and I have it in front of me like you. Thank you. Is it a good phone?
And please buy profesional adhesives. This adhesives are bacis models 9448A is not proffesional glue for screens. Are 0,15mm this Lenovo screens start on 0,2 - 0,3mm 10´inch tablets. Work as proffesional when you wont upload videos on youtube. Chinese market sell adhesives in roll cut. Profi are in sheets normaly. With basic adhesives you will have reclamations after 6 months by unstick.@@itfixall
Congratulations and success, I'm from Brazil. Do you know where I can find parts for HN6 engraver? I need the LCD screen, the battery compartment box, and the springs that place the batteries, thanks for the tips.
Hi, thank you for the video. I want to replace my d15 usb-c charging port too but have no experience with laptop repairs. I have some questions about what your process was. It seems like you first de-solder the original joints and then use a heat gun to pry away the connector. Then you place the new usb-c connector and use some kind of soldering wire to jump the pins together? Please let me know if this is correct and what tools I would need for this job (what wire did you use, what is the gel that is used, do I need flux gel, etc.) Thank you.
Hi, I have used FDS6690AS N-Channel Mosfet. You can use any compatible one by comparing the datasheet. If the values are the same, it will work. Make sure to be N-Channel and not P-Channel.Thanks for watching.
