Electric bikes, spare parts, batteries, and accessories. We bring you all the news and updates about the main brands such as Giant, Bergamont, KTM, Haibike, Flyer, and many others. Do not hesitate to contact us if you have any doubts or suggestions about our content or if you need help finding original spare parts for your e-bike.
Editorial and moderation: Matthias Scheffler, Michael Fehrmann Video production: Oscar Hernandez Rodriguez, Arthur John Camera and editing: Oscar Hernandez Rodriguez, Arthur John, Boris Karacincev Voice-over: Luca Tamburelli
Good question. Well, the narrower the angle the head tube forms with the terrain, the more stable the e-bike will feel, especially in descents and when cornering. On the minus side, it can feel soft and floppy when turning, and harder to keep straight on steep climbs. This ebike has a rather narrow angle. Thanks, Luca
Hello and thank you for your comment. It's compatible, provided that your ebike has Smart Gateway tech., what I can't finf out, sorry. www.ebike24.com/giant-ridecontrol-dash-2-in-1-display
Dear Michael! Very much enjoy your tutorial, installation and upgrade videos. I would like to ask for your recommendation on Bosch ConnectModule. I have just purchased a Gazelle Ultimate C8+ with Belt drive and Active Line Plus smart system, Purion 200 controller and 500W PowerTube. Apparently, according to the Flow app I should be able to subscribe to Flow+ and get the alarm/GPS tracking of my bike but need to install the Bosch ConnectModule with this engine but no one can tell me what part number to order for the right fit and connection under the motor cover that works with the Active Line Plus (2024). Do you know by any chance the specific part number that will be suitable for me? Thank you in advance for your support, Kind regards Peter
Manys thanks for your video Is it possible to fit a purion 200 on a bike with only the system controller (no mini remote or else) like for eg canyon on gravel 7 cf ?
Please help me understand something. Looking to buy a bike now, a Radon Deft, which comes with system controller, and mini remote, but no Kiox by factory. In this case, the system controller connects to the motor and to the mini remote wireless? As the only cable you connected to it was the kiox display cable. Thanks
I note that you commented that Auto Shift can be used with the Di2 shift gear upgrade option. This is not exactly correct as I have just found out from Orbea in Spain. For Auto Shift, the bike must be fitted with the full Shimano Linkglide groupset components, which requires the 11S cassette, the correct chainring, chain and e-tube cables. Orbea only supply the Rise out of the factory with the 12S cassette, the Di2 shifter and rear derailleur, which will allow Free Shift, but not Auto Shift. Having also discussed this with the distributor in Australia (Bike Box), the only way to get full Auto Shift is to order the Rise from Orbea in standard gearing spec, via your local retail bike shop, then get the bike shop to do a full drivetrain upgrade to LinkGlide (11S), including the EP801-RS software configuration. I don't have an upgrade price on that yet - still waiting for the bike shop to get back to me, but will post when I get it.
Hello and thank you for your comment. Yes, from the software side the module does fit your Gazelle bike because it has the Bosch Smart System. Unfortunately, a recurring problem is the space on the motor. Here we cannot make a general statement as to whether it fits. You could check this with your trusted dealer or directly with Gazelle. Gazelle may also have developed special motor covers to ensure that the ConnectModule fits. Hope this helps! Cheers - Michael
Hi, I have a Giant Full-E+ 2 S5, 27,5" 2018. It has a motor "GIANT SyncDrive Sport powered by Yamaha" and a display GIANT RideControl Charge. Can I upgrade to "something" to have the possibility to use the App Giant on the Smartphone? What do I need? Are there compatibility issues? Thank you!
Hi and thank you for your comment. Unfortunately this is not possible with your bike. The Giant RideControl App is only compatible with Giant bikes from model year 2019. Sorry for not being able to help you further. Cheers - Michael
Bonjour, merci pour ton commentaire. Heureusement, c'est très simple : tu dois maintenir le bouton « i » enfoncé pendant 5 secondes, l'affichage passe alors automatiquement des miles aux kilomètres et vice-versa. Cheers - Michael
Cues was the wrong move on the shimano no one wants it it's Di2 or nothing when comes to ebikes for shimano derailleurs that's all we are seeing in the discussion forums at the moment about all this, but we are all waiting for the TRP A12 EASI date and price tag we need to more information on this release date as I personally know of 4 friends including myself with a sore head just now with wanting to upgrade but can't get any more info out the stone! So starting to snap up the Sram GX systems as have been reduced to a reasonable price now and silly not to take advantage of it!
Hello and thank you for your comment. It really depends on where you want to mount the display. If you want to mount it above the handlebar using the single-arm bracket as shown in the video, I would recommend positioning the cable outlet towards the back/downwards. However, if you prefer to mount the display lower down, above the stem, having the cable exit towards the front/in the direction of travel would be the better option. Both options are perfectly feasible. It simply comes down to your preference and ensures neat cable routing on the handlebars. Cheers - Michael
@ebike24 thanks I'll wait till the bike arrives and have a look. It's impossible to tell from the website there are no photos of the handlebars or whether there is a central controller. Thanks for responding, when i find out I'll buy the parts from your website
Hi and thanks for your comment. If you already have a control unit installed, such as the Purion 200 or System Controller, and want to add the Kiox display, then the ID conflict should not occur. This issue only arises if you also replace the control unit, as it serves as the 'brain' of the Bosch system. Cheers - Michael
Hi, I already have the purion 200 installed on my bike. Will then mounting kiox 500 on top of it also cause "id conflict" or there will be no action needed?
Hi, thank you for your comment. If you have already the Purion 200, then the ID conflict should not appear when installing the Kiox 500. The Purion is basically the ‘brain’ of the e-bike system. This means that the ID conflict only occurs if you replace it. Cheers - Michael
Hi Andrew, Thank you for your comment. If your bike has a quick release, I assume it also has mounts for a pannier rack. In that case, you should be able to mount the rack without any issues. We have a tutorial on our German channel, perhaps the visuals will be helpful: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zDVCDaKfOUw.html If your bike does not have mounts for a rack, you can use the seatstay adapter (www.ebike24.com/ortlieb-quick-rack-seat-stay-adapter), which is also explained in the tutorial. I hope I was able to help you! Cheers - Michael
Hi, yes this is possible! This video may help you as well: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jsKCrjyZjH4.htmlsi=otpAK93xAuwnL7Mc Cheers - Michael
Hi and thank you for your comment. Bosch recommends a tightening torque of 30 Nm for the SX motor bolts. However, this may be different for each bike manufacturer. You should therefore stick to the manufacturer's specifications. Cheers - Michael
Hi Michael. I have a brand new Trek 9.8 Rail XT Gen 4 with system controller and mini remote. Would like to add a Kiox 300 over the stem if possible. Do you know if this configuration would work? I seem to have 1 cable routing hole available on the right side of the frame, so ideally a single cable solution to mounting the Kiox on top of the stem (like they show in the Bosch video) would be nice. TIA
Hi Matt, thank you very much for your comment. Yes, this combination is possible with your Trek bike. You can also check here: www.bosch-ebike.com/en/service/productcombinations For the stem mount, we currently offer only one mount that is universally suitable: www.ebike24.com/byschulz-kiox-300-stem-ahead-bracket However, you can carry out the installation just as shown in the video. You can find the Kiox 300 retrofit kit here: www.ebike24.com/bosch-kiox-300-e-bike-display-for-smart-system?number=7600-005 For the correct cable outlet, you will need to check which option suits your bike better. You can also find the Bosch Y-cable for a cleaner cable layout here: www.ebike24.com/bosch-y-display-cable-system-controller Cheers - Michael
Many thanks for the video, it’s quite informative. One question: what is the recommended torque for the mounting screws of the motor? Considering a carbon frame.
Thank you for your kind words! The Bosch mounting instructions for the SX motor state 30 Nm. However, this is only a very general specification. Especially with a carbon frame, I recommend that you contact your bike manufacturer directly. Cheers - Michael
Hi, Thank you for your comment! That is tricky. Is the Bosch System Controller already installed on your bike? Retrofitting the System Controller is unfortunately not possible if you don't have the prefabricated recess in the frame. Cheers - Michael
Hi, the batteries have different manufacturer part numbers depending on the battery size and horizontal/vertical orientation. The pivot/axial mounting type is not indicated with the battery because this depends more on the bike and the specific part you need for the battery. You need to pay attention to the mounting type your bike has when buying replacement parts. I hope this helps! Cheers - Michael
Bonjour, nous avons également une vidéo en français. Vous la trouverez ici : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FuPlTHFf7Tk.htmlsi=opIV-xOS2xFqTID1
Hi, thank you for your comment. If the bike in the video is the same as yours, then this is not possible. Since it is an electric bike, you have to pedal in order to activate the motor support. This is defined by law here in Europe. If you are in the US, then this bike is most likely a 'Class 1' bike (e-bikes that are pedal-assist only, with no throttle, and have a maximum assisted speed of 20 mph). If you would like to use an electric bike with a throttle, you would need a 'Class 2' bike. More info here: www.juicedbikes.com/pages/e-bike-classifications. Hope this helps! Please let me know if you have further questions. Cheers - Michael
Nice Video. I have a Talon E+ 3 29 which has the Ridedash control that you are retrofitting here. I smashed mine and was wondering if it is possible to upgrade to the GIANT RIDEDASH EVO SG DISPLAY? If so, what parts would be required? (cables and handlebar control, etc.)
Hi Bruce, thank you very much for your kind words. Yes, you can upgrade to the RideDash EVO SG display since your bike also uses the SG (Smart Gateway) system. For this display, you will also need a control unit and the display holder. You can find all the details on the product page. The corresponding control units and holders are also linked in the text: www.ebike24.com/giant-ridedash-evo-sg-display You do not need any additional cables, as these are included in the scope of delivery. On our German RU-vid channel, we have a tutorial on retrofitting the display. You may not understand everything, but at least the visuals should help you install the display: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Pd9fOy8WQpE.htmlsi=57fFyfYxAUkzcxlu I will try to get this video translated and uploaded on this channel as well. Do not hesitate to contact us if you have more questions! Cheers - Michael
I have just purchased a Trek Powerfly 4 gen 2 with the Purion and I would like to upgrade it to something that would Bluetooth to my phone with an app. What would you suggest?
Hi and thank you for your comment! It seems that your Trek Powerfly has the Bosch eBike System 2. With this system, unfortunately, there is no connectivity to your phone through the display/control unit. You could upgrade your Purion to the Kiox or Nyon display. Alternatively, you could install a mobile phone holder on your handlebar and use your phone in combination with cycling apps like Strava or Komoot. These links might help you: Bosch Kiox display: www.ebike24.com/bosch-kiox-display-set Bosch Nyon display: www.ebike24.com/bosch-nyon-display-2020-2021 Phone holders: www.ebike24.com/e-bike-smartphone-mount Hope this helps! Cheers - Michael
hay, nice vids you make here, now I have Genesis E-PRO MTB 1.2 PT with 4th gen Bosch (85nM) but also have Purion, is it possible to replace it with kiox or Nyon? thanx
Hi, thank you for your comment. I looked up your bike, and it appears that it does not have the Bosch Smart System but the previous Bosch eBike System 2. If your Purion display looks like this, then it is definitely the Bosch eBike System 2: www.ebike24.com/2017-bosch-purion-e-bike-display-performance-line You can still upgrade to another display. You can use the Kiox display for the eBike System 2 (different display than the one in the video): www.ebike24.com/bosch-kiox-display-set The Bosch Nyon display also fits: www.ebike24.com/bosch-nyon-display-2020-2021 You can also contact our customer service for any questions at info@ebike24.com. I hope this helps! Cheers - Michael
@@ebike24 great! thank you for replay! Yes that`s Purion I have now installed! I`ll go for Kiox you linked, but is there detail manual for instalation?
There should be a manual inside the box with the Kiox. However, you can also find it online here: www.bosch-ebike.com/fileadmin/EBC/Service/Downloads/Bedienungsanleitungen/MY2021/Kiox_Online_Manual/Bosch-eBike-Manual-Kiox-Online-MY21-EN.pdf?_=1708417639
4:49 you see that you have to remove your smartphone case. That is not very handy or wise in case of a fall. My phone can become very hot in sunshine especially with wireless charging. Is it possible to shut the charging off?
Hi, thank you for your comment. You do not necessarily have to remove the phone case. Most cases should fit on the SmartphoneGrip if they are not too thick. I would recommend using the SmartphoneGrip only if you are riding on mostly even terrain. It is not made for use on downhill trails, etc. Bosch states that occasional drops of up to 15 cm are permissible. Unfortunately, you cannot turn off the charging function. If you do not need the charging function of the SmartphoneGrip, I recommend getting a normal mobile phone holder (e.g. www.ebike24.com/e-bike-smartphone-mount?p=1&o=2&n=24&f=96). In the end, the SmartphoneGrip is just a convenient solution for holding and charging your mobile phone on the handlebar while riding. The FlowApp works via Bluetooth, so you can also use other holders. Cheers - Michael
Seen your videos, you explain very well. i haven't found any of the orbea wild. Just got a 2023 one and it would be nice to see a vid on how to run cables from the handlebar to the motor for headlights, kiox. Im in Germany too. bought my bike from Spain. i wanna install lights and shops here wont touch my bike unless I bought the bike at the store.
Hi and thank you for your comment! We don't yet have a tutorial specifically for the Orbea Wild 2023, but we do have some videos on retrofitting a display or lighting system to the Bosch Smart System motor. Here is a tutorial for the lighting system: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UehStx2I35k.html Here for retrofitting a Kiox display: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-24tASpIRSZc.html And in this video we explain the connections on the Bosch Smart System motor: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4Eo_nIglP4A.html Here you can find the full playlist on the Bosch Smart System: ru-vid.com/group/PLPIBfz0e_avlM0Q6Pywa9u1mVpPdzcmLB You can also find the same videos on our German channel, if you prefer: Light system: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2v2ilKluFSQ.htmlsi=ec-pMV2UZiF7WAb7 Kiox Display: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-r1Pds51o8Qc.htmlsi=iUnVndq7RKFV8t5l Smart System connections: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WGdO-47n3gU.htmlsi=1KDmgWi5QrMg-yNO Hope this helps! Cheers - Michael
Nice video. Do you need the MPP cable if you only had one connection? If I only wanted to connect a front light would that fit direct into the spare socket on the motor (the one where you mentioned the purple MPP fits)? Thanks
Hi Andrew, thank you for your comment. In that case you can connect your front light directly into the MPP. You do not need the additional MPP cable. Cheers - Michael
