Thanks for sharing this video. I definitely took some inspiration from you with our own rope tow build here in Ontario. Gotta love #princessauto for sourcing random parts! Just wanted to say thanks for the inspiration. Here's our story: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RkfxB2qaLiY.html
I purchased a class 3 a frame tow bar assembly, it came with saddle that I put bolts straight through the wooden 2x6 with nuts and washers on other end here is the link www.princessauto.com/en/class-iii-adjustable-a-frame-tow-bar/product/PA0008041550
Hi-- this is wonderful. ONe question-- did you have to weld anything on the trailer coupler or were able to use all bolted connections? Can you share where you found the coupler?
Don, we uses a class 3 A-Frame trailer tow bar assembly, it comes with pivot mounts, we used 5/8" bolts with washers and nuts to attach to the wood frame. here is the link www.princessauto.com/en/class-iii-adjustable-a-frame-tow-bar/product/PA0008041550
I'm going to build something similar for my uncle. My uncle's house is at the bottom of a big hill. Would this work if the unit was at the bottom of the hill? I think it will but he is determined to run power to the top of the hill and it run like what you have.
Princess Auto, I believe some Peavy Marts also have them. Get the largest one you can get or I would have used a chain drive to prevent slipping if I built another one. Mark
@STRAUSS HOUSE I think it would be a good idea to build wooden/metal towers. I think it would help getting the rope on the return side up and out of the way so it doesn’t interfere with the skiers. That’s my only recommendation but overall, great design!
Very nicely done. We did a very similar model at home, but I'm having issues with the rope sliding on the tire in snowy conditions. Worked great all weekend in very cold and dry weather, but today in the snow, the rope kept sliding and loosing all traction. did you have issues with that?
Awesome work, thanks for the video. I'm building one for my kids, I noticed in the first assembled view the belt pulley was smaller than the tire, and later in the video, the pulley was about the same diameter of the tire. Did you solve some gearing/speed concerns that you might be willing to share?
Sorry to bug and thanks for your previous reply. I built mine, loosely modeled after yours but am still having trouble. It is chain driven, 11 tooth on motor to 21 tooth on Jack shaft. 10 tooth on Jack shaft to 40 tooth on driven axle. Still not enough power to pull. I have a 3 horse 3450 rpm motor. Just curious about your rope size and length. (I’m trying to pull 1” rope, 600’ of total length. 300’ of towing)
@@beauminnick8531 ok that is not good, your 1st issue is the 3450 rpm motor, that is the incorrect one, you will need a 1725 RPM model. Even the 1725 motor I am running 2" pully on the motor shaft and 16" pully on the tire, with that reduction it's still almost to fast, 3450 will be way to fast and no torque to start up etc.
just wondering what size is your tubular stock ? Appears to be about 1X3 ? also you commented that you would upsize to a larger HP motor. From what little searching I did motors greater than 2 HP also have higher RPMs requiring a greater gear reduction to keep rope speed manageable. Do you have a recommendation on a higher HP >2 HP that is around 1800 RPMs as well? Otherwise nice job!! Trying to get the grandson into boarding and his back yard is perfect for this - thanks for sharing
After watching through the whole video, it's pretty slick. Nice job, I especially like the electrical. Do you have a system that keeps it from running backwards when the safety fence trips or there's a power outage?
I couldn't watch any further without commenting on your garage. It's quite nice with the poured resin floor and living area. I know it seems odd for the focus of the video, but resin floors are pretty cool. Our little theatre company installed one in the auditorium and, though with a dry mop or wet mop, it's a pain to clean but looks better than the old concrete floor.