@livepunx you have to get a switch by yourself. Within the EMG set there is a quick connector, where wires could be screwed in (like those clamps for lamps). So you solder one end of the wires to your switch and the other end is screwed into the quick connector of the EMGs.
these 3 cars just happen to be my favourite of the whole D1GP series, especially Nomukens ER34, i even got a t-shirt with a print of it, but kumakubos GDB and imamuras FD3S are also sick cars.
@sylverzerom Damit erhält man eine Geschw. an den Blattspitzen von maximal 248 m/s. macht zu 343 m/s eine Differenz von knapp 95 m/s. Addiert man die Geschwindigkeit nach vorn als vektor dazu, müsste sich die Bell mit 95 m/s (entspricht 342 Km/h) relativ bewegen um an den Blattspitzen Überschall zu erzeugen. Daher die 342 Km/h. Hoffe die Erklärung ist eindeutiger.
@poly303 wahrscheinlich hab ich mich etwas unglücklich ausgedrückt, musste selbst erst nochmal lesen was ich gemeint habe :) Also Überschall im Medium Luft liegt bei Raumtemp. bei 343m/s (sind 1234 km/h aber so genau kommtrs net drauf an), soweit stimmen wir überein denke ich :) Ob die Bell nun 323 oder 347 U/min macht ist egal (die 324 U/min waren aus wikipedia). Jedenfalls beträgt die Winkelgeschwindigkeit ω=33,93 1/s bei 324 U/min. Rotorduchmesser nehme ich die 14,63m (also Radius 7,31 m).
@sylverzerom Nein, so nicht. Die Hauptrotordrehzahl liegt bei ca. 347. Ich weiss das deswegen, weil ich bei meiner Einheit solche Dinger gewartet habe. Die Drehzahl schwankt, je nach Leistungsabnahme. Und Überschall geht bei 341 km/h noch gar nicht los, eher bei 1100 km/h. Macht aber nichts, Zahlen können verwirren. Das vorlaufende Blatt ist das schnellste, aber nur beim Flug vorwärts, selbst das kann und darf niemals Schallgeschwindigkeit erreichen, denn es gibt 2 Blätter. Ich sage nur Dämpfer
@himrille94 Hi, no there are no wires for the toogle switch inculded. So you need the get some by yourself. I used some normal wires from a automobile cable harness. The wires dont need to be shieled, cause normally your electronis box in the guitar is shieled.
@SnakeSeraphTV thanks, i correct it. was my 1st Megadeth concert also, and i thought they were really good on stage. But i heard some people werent satisfied at all. For me better than on BIG4 DVD, but thats my opinion.
@ColonelHogan9162 um Überschall zu erreichen müsste der Hauptrotor mindestens 447 U/min schaffen. Soweit ich weiß ist die Hauptrotordrehzahl bei der UH1 324 U/min. Macht quasi knapp 95 m/s Differenz zum Überschall, oder 341 km/h, was die UH1 aber eh nicht schafft.
@77Moori Hi, if you wanna use a toggle switch for switching Neck-Bridge PU, you need to solder it. But its only 4 wires to solder. nothing bad. I installed my set in under 20 minutes. Its really easy to do.
@ColonelHogan9162 das ist kein überschallknall, der knall kommt vom schlag in den luftwirbel den das voraus drehende blatt macht. erst ab um die 400 km/h flug nach vorn und durch die geschwindigkeit des vorlaufenden blattes wäre an der blatt spitze ein überschall...