CARS CARS CARS. If you like modified cars that get used on track then this is the place for you. Follow the progress of my car and friends track cars as we prep and build them in the pursuit of fun. thanks for looking and please consider subscribing
Is it OK to use the window cleaning pole and piping for hydrochloride cleaning ie algea walls etc and to use on normal windows cleaning after rinsing out piping when finished hydrochloride job thanks 👍
if you want to check if the co2 tester works - just blow air from your lungs into it, this liquid will detect it :) you don't have to stick it in your exhaust
It's working. The hard carbon deposits on the back of the valve actually make them easier to "shock" with a wet air charge and have them chip off as if you were making a flint spear point. It's the gummy stuff on the valve stem that's harder to clean. You are looking at two weeks, give it a year. It didn't happen overnight, it's not going to be washed away overnight. I have also seen recommendation of adding a little dish washing liquid to the water alcohol possibly 3 ounces per gallon to assist with cleaning the gummy part.
the hell you doing charge battery first lol. you damaging battery. every tool battery comes in storage charged version. which means to preserve fully, so what it would be sold fresh new. charge battery fully gosh even mobile phones evryone knew you forst charge than use, if you ownt you brake battery. dude with dewalt jacket trying to say smth about other brands no wonder, with dull drills into super hard wood. you can see wood so hard sodry even bit gets on fire what a joker. you can grab husky chainsaw and you will fail to cut this log. i myself have nice 100 years + log which is basically rock. to cut it you will need 25 times to sharpen chain.
I really messed up my car today,im lowered 30mm and have bump steer,tierods are at an upwards angle and i spaced the rack with 20mm spacers re aligned and has made it worse WTF🤦♂️🤦♂️🤦♂️
The bump steer is bad in this video due to the extended ball joints.. you shouldn't be spacing the rack 20mm on oem ball joints so put it back to normal.
@jamie-hb8gy have you measured the bumper steer? To do it properly you need to try different size spacers while measuring as you go until you find the correct size.
@@Sparkplugsteve No i haven't in all honesty,i'm definitely getting bump steer though as i thought it was tramlining but swapped from a set of 225/40/18's to 205/50/17 wheels and it's still as bad.Maybe a 20mm spacer was too much 🤦♂️
For my application, id like to go sown to two or three parameters. Mainly oil temp amd coolant temp on track. Not to concerned with other stuff. Can you set up to just run two windows instead of 6 or more?
I have downloaded the HP tuners to check my map parameters, but it cant open the file my tuner have sended me, which is .usr Can anybody help me how to convert/open that file in HP tuners?
Ok, so if i understand correctly. Only VCM Editor isnt enough, i would need to buy their OBD reader. Abother question, i have checked my throttle position with forscan. And it is 74% all the time from 2000 rpm on atleast. Wherever i read that value should be 84%. Also looks like i dont have lspi “safe” map.. also from respectable tuner.. But why 74%, have you ever seen these number as a max value? Also, do you remember your peak boost values from when you were stage 1/2. My is topping at 248 kpa (1,48 bar).
@dominikmugerli7392 throttle position is only part of the tuning. So you can't just assume its bad because of that as they may have restricted other parts of the map but without seeing it you won't really know. Stage 1 and 2 are best left at oem throttle strategy though imo. And yes you need the obd2 to read and view files. Editor alone won't work
Quick question Steve, they reckon LSPI damages a lot of engines due to mapping but dont the knock sensors retard the ignition timing if it detects knock ?
Good question. Lspi is not knock or detonation. It's pre ignition so it's an ignition of fuel before the spark event. As the piston is rising the fuel ignites which causes massive cylinder pressure.
flying mate! Just came back from a Track Day in my pumaspeed stage 1, my best was 1:33 so well done you! Some helpful hints from your lines and braking points!
This, in my opinion, is the best value for dollar (I live in Louisville, Kentucky) that I have ever spent my money on. Other units that do what this does usually start around $300-400 and get up to $500. I have been using the original Lufi for years now with no issues. This new one looks way better. My only issue is that it lacks the inline F1 style shifting/rpm lights. Other than that, this is perfect!
Great video. But confused as every other video says you have to put a mark so you no it’s going in back the same way. I haven’t a clue as I’m going to do mine so just checking videos.
These gauges use code that allows them to read all the standard parameters across all makes of vehicles. I'm not am expert on it but it's like a universal set of codes all manufacturers use. But the boost code used is a universal low resolution one. There is a high resolution boost output from the ecu that the cobb has been programmed to access that's not part of the universal setup.
I have the same issue with my transit connect on both sides. What would I be looking at price wise to have this repaired, could you also tell me if this is a not failure, cheers love the videos btw!
For Android users without a native angle/level app, it seems "Precise Angle Meter" by Alan Robinson may be one of the few apps without ads and data theft. Has some minor limitations and a Pro version, but I believe the free app should be good enough for attempting alignment with a phone.
Sounds like Darth Vader? Tbh I got the impression this is one of those mods that happens because of urban myths and young men looking for something to do to their cars when nothing is needed
I trust your opinion and knowledge so I'm wondering what you think of stage 2R with a standard cat? Tuning shops recommend a sports cat however, I've seen a fair amount of people saying it's fine without a sports cat from their experience with their own cars.