Buy the hot knife, don't try it another way. Buy white out if you don't have any. Make sure the piece that you will outline follows the shape I chose pretty close. Be careful that you do not damage the stantion that one of the screws goes into that supports the actuator, it can happen quickly if you not watching the clearance while using the hot knife. Use a good light because you don't need worklight stress. Call me if you want. My number is easy to find.
Thanks a ton, My 2016 focus st battery cover was loose from the time I bought it a couple weeks back searched a bunch of videos about the battery cover and half of them were missing the back cover and the other half didn't mention the back cover at all. Got mine fitted back in correctly Took no time at all and was easier than I thought. Saw some comments on focus st forums mentioning the same issue with the rear cover so ill be sure to link them this video. Thanks again
I have seen your videos before and I think I even sent you an email through your website offering to make youtube videos in exchange for your products. To my knowledge, I never heard back from you. I am not sure if you have considered that videos made by unbiased 3rd parties generate MUCH more business than self produced "company" videos or not (but they do). I would still do that (make videos for you) if you wanted. Please reply to this comment if you would like to pursue this and provide a RELIABLE way to communicatw with you (possibly an email that you actually check 7 use to start). Either way, these are some great products that you have here.
Call me. I dont remember if i read your email, but if i saw someone offering what you said and their channel has no content and no subscribers, do you think you would stay interested? How will your contribution help ? Send me another email. I will look.
Not if you use the hot knife with the thin flexible 6 inch blade. You are only putting slight pressure and pushing just the tip of the blade through the melting plastic. When the blade pushes through you will feel it just "bump" the edge of the heater core which in no way would damage the core. No different than a hot knife through a stick of butter and when the end of the knife pops out the other side of the butter, do you think the tip of a squared off knife blade will then melt through aluminum? No it will not. The blade tip on the hot knife is about and inch wide and squared off and about the thickness of one millimeter. You going to perforate the plastic one inch at a time, one next to the other untill the cut is complete. Hope that detail helps.
Lifetime warranty against anything. Case by case basis for life. If you pay the shipping both ways I will repair it free for lifetime to original purchaser. Even if you drove a car over it.
This light is now $249.00. It cost more than $100 in raw materials to build it and that does not include assembly labor. Even Boeing buys them from me. The only work light in the world that can attach to an alloy surface / fuselage.
This light does include any battery if that is what you are asking. You use your battery and charger that many professional mechanics already have. Buy box > www.goosegrip.com/product-page/goose-grip-swivel-stick-m12-remote-magnetic-battery-housing
After you remove that screw that holds it and its flopping loose, pull downward and spiral your pull down motion. The holdup is the lack of clearance with the bcm and bcm holder, but it does go past it and out. Be careful as it passes by the plug into the blend door actuator. Yeah, the first one i did i struggled with how it comes out but it does. And it goes back in the same way. I even trimmed like <ONLY> 1/4" off its length to assist putting it back.
Hey, If I don’t have the scanner to reprogram the actuator after replacing the blend door, but instead I just buy a new actuator from the part store, will I still have to reprogram the new one too??
Its going to work just fine even without a calibration, but because none of us mechanics like to get that call "its doing the same thing as before you fixed it", we do the calibration. So pay someone to do the initialization/calibration as soon as you can after you do the job.
This is what it is like when We The People have a brain dead halfwit puppet for a commander and chef, shit should have been dropped on the other side of the USA
Lol how the show how the did spray the covic19 😂 what clown nation are we turned in clearly a president who is mentally Ill and should be removed a long time ago
