Тёмный
Jordan Lee
Jordan Lee
Jordan Lee
Подписаться 148
Комментарии
@ZetaLeong
@ZetaLeong 4 часа назад
小小意見 不如係條片既title到講埋會同咩內容有關 例如上一條tip 1加翻係關於ball cap同wheel hub 呢一條加翻係講set camber既參考咁
@86chebilly
@86chebilly 4 часа назад
感謝! 小弟是初哥,正考慮閣下的提議作改進,請繼續支持!
@ZetaLeong
@ZetaLeong 3 часа назад
加油 你啲片好有用💪🏻
@rcstreet
@rcstreet 12 часов назад
1.2F / 1.5R camber, 1.5 rear toe in?
@mokka8727
@mokka8727 День назад
其實一早想買架cero sport, 但車友話波子擔不易set,放棄。
@86chebilly
@86chebilly День назад
我有玩過cero sport, 很不錯,又便宜,我的仍然隨時可以行走; 我玩的地方有不少人玩得不錯,週五晚他們通常出現,可以一起鑽研一吓!
@mokka8727
@mokka8727 22 часа назад
不如直接d,从你經驗,那款車性價比高?
@mokka8727
@mokka8727 21 час назад
有幾個車友,成千蚊入部4wd m 車,也不夠12仔靈活。先前又話2nd難control….
@86chebilly
@86chebilly 19 часов назад
​@@mokka8727心目中cero ultra 2.0 性價比最高
@kairosanna1292
@kairosanna1292 10 часов назад
​@@86chebillythanks, 可能砌部sport 先,但為什麼55version平過64version?
@kaman_channel
@kaman_channel День назад
好有用分享,請教一下俄妹油壓比SP1稍微硬,會有乜野好處或者缺點?感謝🙏
@86chebilly
@86chebilly День назад
簡單地說,就是"要在賽道上盡量利用避震的行程而又不會碰撞避震盡頭"。 前後左右油壓總有一支最容易用盡,所以調校出來有些車尾硬一些很正常。例如我的SP1如果車尾調校得像我的俄仔般硬就會甩尾,但調校得軟一些就會太穩固,再軟下去又會因油壓碰撞盡頭而甩尾,這些都與重量、衝力、搖臂幾何、車呔抓着力等多個因素有關。我只是粗略令新車不會太軟或太硬開始,然後有更多測試。
@kaman_channel
@kaman_channel День назад
@@86chebilly 明白,我對彈弓硬度影響不太了解,經你講一講又開始明多d,俄妹調較軟硬度又真係方便可以更了解不同特性
@baggiofu
@baggiofu День назад
Good 分享👍🏼👍🏼
@woodtat1
@woodtat1 День назад
加油 睇你的影片好有幫助 學到好多野
@powerlam5471
@powerlam5471 День назад
好睇👍可否開返字幕功能?
@mokka8727
@mokka8727 День назад
片主有心⋯ball 頭擔這樣煩。 玩部12仔pan car 算
@86chebilly
@86chebilly День назад
12仔的虛位影響可能更大
@kairosanna1292
@kairosanna1292 День назад
Yes, 希望Billy 出多些片,講下他玩過d車的problem 及solution, 如Tamiya. 但TRF421,我玩不起.
@dyesiuming3573
@dyesiuming3573 2 дня назад
多謝分享👍🏻👍🏻又學到嘢👍🏻👍🏻
@haychow2234
@haychow2234 3 дня назад
咁多法寶好難跟喔😂
@aip3265
@aip3265 3 дня назад
👍
@logutgutable
@logutgutable 4 дня назад
師兄加油繼續出多啲片💪請問你後面打橫裝嗰兩條殼柱乜乜品牌的Thanks!
@86chebilly
@86chebilly 4 дня назад
Yokomo的橫殼柱可以安裝在SP1上,但由這橫殼柱再伸出來的就是DIY了,是用另一對横殼柱鑽孔製成的,有D麻煩
@g12c3
@g12c3 5 дней назад
差速入面有啤令,MTC2R咪有囉,點會係呢架車第一架? 呢架車,根本就百鳥歸巢😅
@86chebilly
@86chebilly 4 дня назад
感謝意見,但經核實後,SP1除了在近Oring處有軸承外,還在十字架中央有額外的兩顆細小軸承,MTC2R則没有,你可自行下載兩車的說明書作比較就會明白。
@lobolo4875
@lobolo4875 5 дней назад
Asso真係bb膠😂
@lobolo4875
@lobolo4875 5 дней назад
細心❤
@samng550
@samng550 6 дней назад
客觀分析👍 内容實在、沒有費話 相比較另一位壇主不停講,但大部份都係講左再重覆,高下立見,收聽/收睇也舒服。
@aip3265
@aip3265 7 дней назад
Good analysis! 😀
@yamama11234
@yamama11234 5 лет назад
do u have one built for sale ??
@Nibcab3111
@Nibcab3111 5 лет назад
That's a very elegant set up
@dans5595
@dans5595 5 лет назад
how'd you do it?
@leetakr
@leetakr 6 лет назад
what is the name of this song ?so beautiful.
@CircsC
@CircsC 6 лет назад
Do you have a part number for the servo motor?
@ilud2007
@ilud2007 7 лет назад
with GL, AMZ , BZ and any other awd ruled all over the race, but I'm still love my mini z. This vid give me hope to beat them :D
@xgeo88
@xgeo88 7 лет назад
do you sell it?
@tylerfritchle4002
@tylerfritchle4002 7 лет назад
front lower pivot balls??
@TheK20eg
@TheK20eg 7 лет назад
Where did you buy this? How much?
@thaddeushinnant1595
@thaddeushinnant1595 7 лет назад
so can you email me to see if you can do mine like that?
@thaddeushinnant1595
@thaddeushinnant1595 7 лет назад
dwighthinnant@yahoo.com
@TargetingXmod_RC
@TargetingXmod_RC 8 лет назад
That thing in the other videos explaining on how to do it, is super awesome! Big like... in wonder if Kyosho have seen it. It should come standart that super LCG brushless AWD miniz! Thanks for sharing! Can you build one for me, and take my money? (seriously?) Miniz AWD is the king of mini's... well AMZ come along to :P
@TripleCZ
@TripleCZ 8 лет назад
that thing is QUICK!!! but I like the MR series or xmods with miniz boards more
@奧丁-w7m
@奧丁-w7m 8 лет назад
老師好利害丫!!