Hi @Pampali - thank you for reaching out. The Black Point Architect, as a profile optimization feature, works based on a existing profile resp. an existing ColorGPS profiler session. In other words, the Ergosoft Black Point Architect lets you alter the black value of your profile after the profile has been created. This allows you to edit / adjust the black point without the need to remeasure the profile itself everytime. Here is the link to the step by step documentation: doc.ergosoft.net/Home/ReadPage?pageId=5141&languageId=1&buildId=1014&versionId=1&chapterID=14&groupId=0&searchWord=black%20point%20architect Thank you & happy printing!
Hi @mostafakarami3938, Thank you for reaching out. The best way to contact our team regarding the barcode section is to visit helpcenter.ergosoft.net to create a ticket or send us a short message via www.ergosoft.net/contact-us/. Thank you & happy printing Team Ergosoft
What if "replace Spot color" isn't an option? Only "replace color". Also, in order to get a full bleed, can I in "Bleed cut lines" change that measurement to -.5 to bring the cut line into the print insuring a full bleed?
Hi @user-wc5xh5kd4r, Thank you for reaching out! Here are some details regarding your questions: Ergosoft RIP enables you to specify cut paths using various options, including as a specific color value. Additionally, our Bleed Cut Lines feature supports negative values, offering greater flexibility for your printing needs. For more detailed assistance, please visit our documentation site at doc.ergosoft.net or our help center at helpcenter.ergosoft.net. We're here to help, so if you have any further questions or need clarification, don't hesitate to reach out to our technical expert team via our help center. Thanks & Happy printing! Team Ergosoft
Hi @johnnysikaffy3594 Yes, Ergosoft RIP enables you to create multi-color profiles using fluorescent inks as additional colors. You can define your custom ink setup in the PrintEnvironment under Printing Ink Assignment. For more details, we suggest you visit doc.ergosoft.net or helpcenter.ergosoft.net to get in touch with our technical expert team. Thanks & Happy printing, Team Ergosoft
Great video but it leaves two questions: 1. does it matter if ink limit is set after or before density linearisation? 2. at the end of the video in print env. settings you display the embedded icc profile without ink limit set on the print env. Is that the correct setting? So we set the ink limit in ICC but not in the print env.?
Thank you, @timijanoirgano, for your feedback. We put a couple of pointers together for you: 1. No, it does not matter. In general, the ink limit has no effect on the density linearization. While the linearization focuses on each color, the ink limit controls the limit for when using more than one color. 2. Yes, the setting in the video is reasonable. However, different configurations can make sense depending on the application/goal. The ink limit set in the ICC is used when a color-managed (via ICC profile) workflow is used. The ICC in the print environment is generally applied when a direct conversion (e.g., CMYK to CMYK) is used. For more details, we suggest you visit doc.ergosoft.net or helpcenter.ergosoft.net to get in touch with our technical expert team. Thanks again & Happy printing, Team Ergosoft
Hi @jakubzukowski111, thank you for reaching out. Chris and Mike are using the latest version of Ergosoft RIP, Ergosoft 17 (Version 17). For more information we suggest you visit our website www.ergosoft.net to get in contact with our product experts.
Bom dia @importadorcanecas2023 ! O Ergosoft RIP é otimizado para o Windows 11 e não é compatível com o macOS. Thank you & Happy printing! Team Ergosoft
Hi @muhammadzamir-nt6iu, Yes, Ergosoft RIP can indeed process Adobe Illustrator files. We’re really sorry for the delayed response and appreciate your patience. For more detailed assistance, please visit our documentation portal at doc.ergosoft.net or our help center at helpcenter.ergosoft.net. If you have any more questions, feel free to reach out to our technical expert team. Thanks & Happy printing! Team Ergosoft
Können verschachtelte Jobs und auch geteilte/segmentierte Jobs geschnitten werden ? Barcodes können zum Schneiden erzeugt werden? Kleiner Fehler im Video. Man sollte erst Kisscut and dann erst Durchschneiden.
Herzlichen Dank für Ihr Feedback und den Anwender Input! Für Ihre spezifischen Fragen bezüglich Cutting verschachtelter/geteilter/segementierter Jobs sowie der Barcodes möchten wir Ihre Anforderungen gerne im Detail mit Ihnen besprechen. Wir freuen uns auf Ihre Kontaktaufnahme via es.support@ergosoft.net . Team Ergosoft
Muito obrigado @marceloterra609 pelo feedback positivo do senhor. Desejamos que o senhor continue tendo sucesso com o Ergosoft RIP. Thanks & Happy Printing! Team Ergosoft