We're a China-based global display manufacturer that has been a worldwide business in design, produce and sell various displays for small to large companies and includes many Tier 1 multinational corporations since 2003.
This e-Paper display can't connect with Raspberry Pi Zero board directly,we have the Raspberry Pi HAT which can connect with Raspberry Pi Zero terminals,pls buy them on the links below.Or,write us at <sales@buydisplay.com>.Thanks~ www.buydisplay.com/black-2-9-inch-e-ink-display-w-raspberry-pi-hat-e-paper-296x128-iot www.buydisplay.com/raspberry-pi-zero-w-v1-3-with-wifi-and-bluetooth
I have no idea what will use it for, but I'm defenitely buy it and find the usage of it. Could you tell me what this device can use it for as an example?
Dear Customer, For such Uart display, it can be used in any smart devices, such as smart coffee machine, smart toilet and etc...Here is the link where you could check the details www.buydisplay.com/blog/open-source-HMI-project.html. pls refer to. Thanks.
Dear Customer, We didn't understand your question, could you pls send the details to sales@buydisplay.com? then we will ask my engineer for helping and then reply you accordingly. Thanks.
Dear customer, Yes. We have the technical documentations for this parts and also tutorial for Arduino, pls download them at the bottom of this page www.buydisplay.com/low-cost-lcd-display-4-3-inch-arduino-spi-i2c-tft-touchscreen-800x480. Thanks.
UI_Editor-II_V2.30 provided by us in free could be used for UI design. You can download it from one of HMI display pages on our online store. Here is the example link : www.buydisplay.com/5-inch-800x480-hmi-intelligent-smart-uart-spi-touch-ips-tft-lcd-display
No,you don't need to do that work.Because We'll according to the interface you selected to welding the resistors well before shipment. Pls send us email at <sales@buydisplay.com> if you have any other questions.Thanks~
Dear Customer, Yes. It will be work with ESP32 but you need to develop software and hardware by yourself, because we have tutorial for 8051 microcontroller and Arduino but ESP32 don't have. Wish your understanding. Thanks.
Hi, I believe TFT_eSPI library use hardware SPI? If that's the case, I am afraid you can not use this library because TFT_CS is not connect to the PCB, So you can only use software SPI. You could use the UTFT library at the bottom of of this page www.buydisplay.com/1-3-inch-tft-ips-lcd-display-module-240x240-spi-for-arduino-raspberry-pi, Thanks
Hello, Yes, We surely could ship to India, Pls order on www.buydisplay.com directly with paypal or credit card or bank transfer, Any other questions pls send me email to sales@buydisplay.com and attention Mr Sajay Peng, Thanks
Hello, Yes, We surely could ship to India, Pls order on www.buydisplay.com directly with paypal or credit card or bank transfer, Any other questions pls send me email to sales@buydisplay.com and attention Mr Sajay Peng, Thanks
Hello, Yes, We surely could ship to India, Pls order on www.buydisplay.com directly with paypal or credit card or bank transfer, Any other questions pls send me email to sales@buydisplay.com and attention Mr Sajay Peng, Thanks
Hi, I bought ER-TFT043A. It uses ST7262 as driver IC. I couldn't find any sample or library about st7262. If the project is successful, I plan to buy many displays, but we couldn't get st7262 to work. If you have a driver for it, can you share it? Otherwise, we will have to change the display in the project because we can't write st7262.
Dear Muratt Could you pls send your order number to <sales@buydisplay.com> this email box? We need to check the deatails before answer your question.Thanks~
@@okkymahardika748 Dear Customer, it's now we don't have the touch panel for this display, if you want to get the details of this display, pls find the technical documenations at the bottom of this page www.buydisplay.com/1-05-inch-120x240-ips-tft-lcd-display-4-wire-spi-gc9a01-controller. Thanks.
Hey, I landed here after trying to do some investigation. In the description, you say "The temperature for controller RTD2660 would increase during working" My question - how hot is typically normal, for yours? With the one I got, the chip on the controller gets too hot to touch (other than a quick dab with my finger) and the entire PCB gets very warm too. This is driving a 7" display and is powered via a 5V/1A supply. I wouldn't like to be getting a replacement for other projects only to find out that it's the same on all of them.
we didn't measure the temp, It should be around 60-70 degree, Indeed it's hot and it's nature for this chip during normal operation. For 9" tft display with small hdmi driver board, It should be almost the same.
Dear Customer, Sorry, we couldn't find your purchasing record on system by using your ID. Do you have the order number from us? because we need to know what's exactly you ordered from us. Thanks in advance. Pls reply to sales@buydisplay.com. Thanks.
NRE Tooling cost would be much higher than the watch itself, Not suggested to make a tooling, The watch only costs USD29.5 right? See this one www.amazon.com/Casio-CA-53WF-1B-Calculator-Digital-Original/dp/B088HH247X/ref=asc_df_B088HH247X/?tag=hyprod-20&linkCode=df0&hvadid=693720601178&hvpos=&hvnetw=g&hvrand=11471796993614719768&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9060325&hvtargid=pla-992693187499&psc=1&mcid=ad44259b4b2a3a7db8ed92ae85ec872c&gad_source=1&gclid=CjwKCAjw0YGyBhByEiwAQmBEWj7MTWs8Yam4BYxSVN6mSH9dEYbLUi8Q1KyqZ1dkz8ak_D8Ix7dfIhoCj4sQAvD_BwE
i have purchased and trying to interface it with pic microcontroller, but it isnt working. could u plz provide me example code with pic or with any other microcontroller.
Dear Customer, Sorry, we couldn't find your purchasing record on our system. Do you have the order number from us? We need to know what's exactly you ordered from us? Pls send the details to sales@buydisplay.com via email. Thanks.
Good day . Could you help me? use Arduino Due and 7" TFT LCD Display SSD1963 Module Touch Screen Shield. I can't read the image from the sd card. I bought your lcd display, I was hoping that the libraries and examples are! Marian PaĽa- Slovakia - PREŠOV.
Dear Customer, Sorry, there is no same one like 1.3'' TFT on 3.2‘’ TFT product listing. Here is the link where you could check our all 3.2'' TFT designs www.buydisplay.com/tft-display?diagonal_size=294, pls refer to.
Dear Customer, Our existing ERC1602-3 supports 14 pins, if you want to get 11 pins, then we're very glad to custom for you, but new tooling cost and MOQ is required, pls note it. Any questions, pls send to sales@buydisplay.com. Thanks.
Just bought this display. Planning to connect to raspi 4. Unfortunately your docs doesn't match the spi interface labels on the lcd board, which are VCC, GND, DIN, CLK, CS, DC, RST Guessing DIN is SDA and CLK is SCL. Am I right? A python example would be nice. Thx
I am testing the Circular Progress Bar(DCh) function with my ER-TFT028A2-4-5465 (2.8-inch) screen. When I send data (from UserCommand on UI_Editor), for example I send 0000 000A and then 00 00 0050 and then 0000 0165, everything works fine. The problem is when I send, for example, 0000 0160 and then 0000 000B (a number smaller than the first one sent), the bar stays full and there is no change. I hope you can help me with that.
If LQ050T5DW02 is 5" tft display with 480x272 pixel with the same 40pinout and pin configuration as our ER-TFT050A3-2 Display, I believe it will work with our small HDMI Driver board, Thanks